To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.
Features:
Specs:
Setting up these tabless base plates for use with your Demco tow bar is fast and easy. Just remove the attachment lugs from the ends of your tow bar arms and replace them with these tabs. Then you can just insert the tow bar arms into the base plate receivers to hook up. There's no need to remove the tabs from your tow bar, so you won't run the risk of misplacing tabs. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle , your car maintains a clean look when it's not being towed.
Using the Demco Tabless base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
If you have a Demco Kwik-Tow tow bar or a tow bar from a different manufacturer, an adapter may be available. Demco makes adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
Type of Tow Bar | Adapter |
---|---|
Roadmaster Sterling All-Terrain, Blackhawk 2 All-Terrain, and Falcon All-Terrain | e98983 |
Roadmaster Falcon 2 and Tracker | Use both DM9523128 and DM9523036 |
Roadmaster Nighthawk All-Terrain | DM9523062 |
Blue Ox (excludes Embassador) | No adapter needed |
Demco Kwik-Tow | DM9523128 |
Average Customer Rating: 4.9 out of 5 stars (219 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.Installation went well! The pictures in instructions are a bit hard to decipher! Using it in a few days. It is a replacement my last CR V 2003 was totalled in an accident had a Blue Ox before seems comparable!
This fit as it should works great I have towed my Honda over 5000 miles and no issues
This base plate is of exceptional value and construction. It was fairly easy to install on my 2008 Jeep Wrangler by myself but would have been quicker if I had an extra set of hands. Overall I am extremely happy with how the base plate looks and the customer service was above and beyond expectations. I would recommend the base plate and you don't have to look anywhere else than etrailers for what you need.
Love it,my bumper wasn't rated for towing so I had to go this route. Pleased it fit fine with the aftermarket bumper.
Have had Demco baseplates on two prior vehicles - very satisfied!
One caveat, though, and it applies to the Chevy Equinox: The mounting points are two thin layers of sheet metal tacked together to form the "frame rail", which make for a pretty weak, scary installation. I added an extra piece of metal plate to the backside of the rail. And be sure to install the safety cables that come with the baseplate, just in case!
Relatively easy to install, works great, less obtrusive than other brands. Instructions are clear, quality is good. Shown with knuckles removed. As you can see, I had to improvise to mount the coiled cord socket and breakaway switch.
Exact replacement for our broken one. Your installer recommendation of Montana trailer services is spot on.
John Bell is the owner and sole person. He is terrific. Did excellent quick job, he is knowledgeable and noted prior installer left off safety cables. Recommend him to all. Thank you
I purchased this as part of a package which included; Hitch and wiring for my 2022 Equinox, Base plate, Tow Bar, brake System and connecting air hose, break away cables, LED tow lights with wiring harness, and a trickle charger to keep the Equinox battery from going dead while I was towing it behind my class A RV.
I had etrailer do the install of all the components on my car and RV. All the workmanship was excellent and done in the amount of time they said it would take. Also because they did not have a video of this equipment being put on this year and model vehicle, I gave them permission to make a video(which added a extra day and a half to the install)and the installation was free. Everything has worked perfectly and I couldn't be happier. Etrailer is my go to for anything towing and also RV parts.
Product supplied fit as required as per instructions, Makes flat towing hookup simple and quick to do.
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
I recently completed a DIY installation of the Demco Tabless Base Plate on my 2021 Jeep Wrangler. Installation is fairly straightforward following the etrailer.com videos. A couple gotchas on the videos.
First, one of the videos suggests removing a sheet metal plate to provide easier access. While it does make for easier access during removal of the bumper, you should reinstall it BEFORE installing the base plate. If you install the baseplate first, there is insufficient clearance for the bolts that hold the sheet metal plate.
Second, the videos show reinstalling the plastic air dam after reinstalling the bumper. At least on my 2021 Wrangler there is NO way you could do that without seriously bending, and possibly breaking the plastic dam. Reattach the dam to the bumper BEFORE reattaching the bumper. Clearances for rebolting the bumper are sufficient. I did it without a lift (thank goodness for the Wrangler’s high ground clearance).
Bottom line is it’s a bit of a project but looks great.
Installation was fairly straightforward and the directions easy to follow. A great product.
The reinstall kit for the SMI stay and play duo braking system was exactly what I needed we removed it out of a 2012 Cadillac SRX and a RV shop will be installing it in a 2020 Jeep Wrangler I will send pics of the final installation later on this month ! Great product was delivered with all parts needed in three days and as usual great customer service !
Great tow bar, easy to handle, not over weight
I was very pleased with the service I received from Karl. The equipment was very well made. It seems the Demco baseplate and wiring kit are superior to the Blue Ox I’ve used in the past. Thanks for your service and products.
So far so good. Packages came intact. Everything unpacked and looks ready to go. I’ll keep you up to date on the installation. Thanks Jessica and team for keeping me up to date on the delivery.
Everything fit great and everything is working great.
The baseplate installed easily. It looks great on the Jeep Wrangler. You have to know it has been installed in order to see it. see the photo
I can’t say enough good about how great etrailer customer service is! Our trip was nearly a complete disaster after having a tow plate added to my jeep. We had planned to tow the Jeep and drive back to Maryland from Texas. After hours on a Friday night we found that the connectors were missing but we had to get on the road anyway, so my son drove the RV with my granddaughter and I followed, driving the Jeep. We kept trying to reach the installer but it was the weekend so we rented a U-Haul. Once we were able to ride together, we called etrailer. The parts we needed were expedited to my son’s home and now we can proceed to my grandson’s soccer tournament without having to use the U-Haul! THANK YOU ETRAILER FOR YOUR QUICK RESPONSE and saving the family trip.
Eady Order, Very Fast delivery. Will update after base plate installation
I have not installed my base plate yet, but the 5-Stars is for the service I have received from etrailer I was sent the wrong base plate which fit the factory plastic bumper mine is a steel bumper, but etrailer was great about the easy return and repurchase. Hard to find companies with such great customer service.
Will update this review after installation..
I received the parts from etrailer much sooner than expected. They ship very fast.
Unfortunately some of the hardware was missing. The box arrived a little beat up. The bag the hardware came in was torn open. It seems that a few nuts and bolts were lost in transit. Since my shipment arrived on a Saturday, I did not wait until Monday to call for replacements. I went down to local HW store and bought what I needed. Fitment was excellent and installation went very smooth. I will continue to shop etrailer for all my towing needs.
Fit perfectly, 2014 Honda Crv. what else to say?
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dillmag
12/21/2020
Just like it should