Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
Average Customer Rating: 4.7 out of 5 stars (186 Customer Reviews)
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.Perfect size. Moved the trailer yesterday using the trailer jack, so much easier.
Strong and easy to install
An outstanding piece of quality equipment. The wheel swivels smoothly under all conditions. 10x better than the cheaper alternatives.
This was the specified swivel jack for my Aluma MC10 motorcycle trailer. It was spec'd by the manufacturer, by etrailer, I ordered it, it arrived and...no way it's going to fit my trailer! The jack is much longer than the tongue/hitch. So, after everyone's recommendations I have to send it back and I'm out $18 or so in freight. You decide how many stars. The service was expedient but why is it costing me $$$ for their errors?
Sturdy and well-made, easy to bolt on, made in the USA.
Great product. Stronger and better made than the jack that came with my Mew trailer.
awesome service, speedy delivery!!
Thank you!
If you want the best trailer jack, reach for this! Made right here in the USA! Customer for life.
Easy to install and the trailer is easier to move not having to hold the tongue and try slide a block under it when I set the tongue down.
Fit is good on my trailer. Wish the install diagram was a little clearer
Quality construction. Bolt attachments to frame do not align with DL's spare tire carrier.
This is the same jack that came on my boat trailer and lasted for years. I bought it again for that reason.
It's freeezing up after using it for a year now.
Jenny N.
8/13/2022
The manufacturer would like to reach out to you. The jack does have a three year warranty.
Perfect replacement for similar broken unit.
Great product. Easy install.
Brooks C.
8/15/2020
Its great.
Can't ask for much more at this price point. Easy to install, works as you would expect. I bought two, both are perfect.
Excellent in every way. Great price and fast shipping.
This is the 2nd one I bought. The 1st was from Amazon. It was obviously a previous return. It had scratches on it and small pinhead size rust
marks all over. This one had a couple small scratches and some type of
marks on the shaft. They will probably buff out. The plastic cap at the top was also damaged, but still serves the purpose. I needed a jack that had extra lift and there aren't as many of these, so I decided I'm just going to keep this one. Also, there's no grease fitting and I fail to understand why any manufacturer wouldn't put one on. A lot of the damage problem could be easily solved with better packaging. The metal mounting parts are in a plastic bag and allowed to just flop around inside the box. I just got the jack today, so it's obviously not mounted and I can't give you a review on operation. I suspect it will be okay.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/2/2022
I will have our Customer Service team reach out to you.