Arrives before Christmas 
Great for marine use, this hub can be used on idler axles or paired with a 12" disc brake rotor. Inner and outer races included. Inner bearing (25580), outer bearing (15123), grease seal, grease cap, and lug nuts sold separately.
Features:
Specs:
Bearing, Race, and Seal Information:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a look at this DeeMaxx Galvanized Trailer Idler Hub. This marine grade trailer hub assembly is going to fit your 6,000-pound trailer idler axle with a Number 42 spindle, and this long, the long wheel studs are going to let you pair this with an over-the-hub brake rotor for disc brake applications or a custom wheel with a thick mounting face. This does feature a galvanized steel construction that's going to be durable and corrosion resistant. So this is going to be great for use on a boat or a snowmobile trailer. And this has a bolt pattern of six on five and a half inches.
And to measure the bolt hole diameter on a pattern with an even number of bolts, as you can see you're just going to simply measure from the center of one bolt hole to the center of the other bolt hole directly across, and that gives you your bolt hole diameter of five and a half inches. And some other information that you're going to find helpful I have there on your screen. The dimensions of the wheel studs, it's a half an inch in diameter and two and a half inches long. And this has a weight capacity of 3,000 pounds. So when this one is matched with the one on the other side of the axle, that's where it's going to meet your 6,000-pound axle capacity.
And this does include the races. They are pre-installed as you can see here. And the bearings, the grease seal, and the grease cap are sold separately. And just to give you that information on the bearings first, the inner bearing is 25580. The outer bearing number is 15123.
And the races again, that are pre-installed, the inner race number is 25520, and the outer race is 15245. And then the grease seal, you'll need to pick that up as well. And the grease seal number you will need is GSS-2125DL. Now this hub weighs about a little over seven pounds and that's going to conclude our look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Great for marine use, this hub can be used on idler axles or paired with a 12" disc brake rotor. Inner and outer races included. Inner bearing (25580), outer bearing (15123), grease seal, grease cap, and lug nuts sold separately.Perfect fit
Good value in galvanized hubs.
Great service and knowledgeable Employe es.
Good, little bit late, but that's good.
Well you'll be able to log on to the ground
Very quick delivery…….Great product!!!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.