Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Extra Long Adjustable Ball Mount Recommendation for Towing a Trailer
  The best option we have for this is the 22K BulletProof Hitches 2-Ball Mount # HD208 which offers a 9-1/4" drop or 9-1/2" rise and measures 15-3/8" from the center of the hitch pin hole to the center of the hitch ball. I also recommend securing your investment with a locking hitch pin like part # 34061074-D which is just for the shank or part # 34061674-D which is for the shank and the ball mount platform. Attached are some review videos for you to check out.
  view full answer...
• etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer Towing
  Yes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because of the matte black finish that not only looks more rugged but is also more durable than the classic glossy black finish against road debris. The next thing you need for your towing setup you also need the Curt T-Connector Wiring # C55312 and mounting brackets # 18144 and # C57202. This gives you a way to place the wiring...
  view full answer...
• Adjustable Ball Mount with 1-7/8 and 2 Inch Balls
  We do have some adjustable ball mounts that feature a 1-7/8 inch and 2 inch ball. We have Rapid Hitch # AM3411. We also have some with 3 balls (1-7/8, 2, and 2-5/16 inch) including # D900 and # 3371802225. I have included some links to videos for you.
  view full answer...
• Recommended Hitch and Wiring to Tow 3500-lbs Trailer with 2021 Volkswagen Atlas Cross Sport
  The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C93CR that fits the 2021 VW Atlas Cross Sport has a maximum towing capacity of 5000-lbs (the same as your 2021 VW Atlas), so this hitch is rated just fine to tow a 3500-lbs trailer and will do a good job. Curt hitches have a thicker powder coat than some others on the market, which helps protect the hitch from nicks that might lead to rust and corrosion on the hitch, so it's generally what I recommend using. If you DO NOT have...
  view full answer...
• Adjustable Ball Mount that Comes with a 1-7/8 Inch Diameter Trailer Hitch Ball
  Adjustable ball mount # C45900 does not have a 1-7/8 inch ball option but I do have a recommendation for you. Check out the adjustable ball mount with a tri-ball attachment, # D900. It has a 1-7/8 inch ball, 2 inch ball, and 2-5/16 inch ball.
  view full answer...
• Can the Curt Multi-Ball Adjustable Ball Mount # D900 be Used in the Rise Position
  Curt Multi-Ball Adjustable Ball Mount # D900 can be used in the rise position to get more height. I have included a link to a video review of this ball mount for you.
  view full answer...
• Longer Adjustable Ball Mount Recommendation for Better Jack/Tailgate Clearance
  The issue with hitch extenders is that they end up cutting the capacity of the hitch they are installed in by 50 percent due to the extra length and movement in the hitch. So with that in mind there isn't a hitch extender we can offer that will give you the length you need and not cause issues with weight capacity. Plus none of them have the weight capacity you need either. Best option is a longer adjustable ball mount to get you the length you need like with the Curt Multi Ball Mount...
  view full answer...
  
• Parts Needed to Tow a Boat Trailer with a 2016 Honda Pilot
  To start, you can use the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13146 you were looking at, and it's a great choice because of the durable powder coating and strong design. In addition to the hitch/receiver, you'll also need a wiring harness, ball mount, hitch ball, hitch pin and clip. For a wiring harness I recommend using the Tekonsha T-One Wiring Harness # 118760, which offers a simple, plug and play installation and gives you a 4 way trailer plug on your 2016 Honda...
  view full answer...
• How is the Shank and Head Supposed to be Oriented on the Curt Multi-Ball D900
  I spoke with Curt Mfg. and the the shank can be flipped, but the receiver portion or head must be oriented with the bolt and welded braces on top.
  view full answer...
• Will the Replacement 2" Receiver for Curt Multi-Ball Ball Mount Work With Weight Distribution Shank
  In regards to the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount part # C45802 which is a replacement for the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches part # D900, the two holes are spaced 2-1/2" apart so it will work on a weight distribution shank, you'd just need the Replacement Tri-Ball for Curt Adjustable Ball Mount part # C45800.
  view full answer...
• Can a Ball Mount Be Used In Place of the Tri-Ball On the Curt Multi-Ball Ball Mount
  I do have an option for you but the Replacement 2" Receiver part # C45802 does not accept a standard ball mount. It only works with the Replacement Tri-Ball part # C45800 which when combined with the Replacement Shank part # C45059 would give you the Curt Multi-Ball Adjustable Ball Mount part # D900. In other words, you cannot use a standard ball mount in place of the tri-ball on the Curt Multi-Ball Ball Mount. If this is not what you are asking please just let me know. If you are looking...
  view full answer...
• Distance From Hitch Pin Hole To Gusset on Curt D900
  The distance from the hitch pin hole to where the gusset meets the shank on the Curt # D900 is 4-1/4". Whether or not this will work will depend on how far down your hitch hangs. The greatest amount of clearance from the hitch pin hole is 7" in the rise position. I have attached a picture showing these measurements as well as others for your reference.
  view full answer...
  
• Will the CURT # D900 Multi-Ball Adjustable Ball Mount Work on a 2005 Jeep Liberty at Maximum Rise
  I produced a short video and added dimensions to a photo for you so that you could measure and be sure the CURT Multi-Ball Adjustable Ball Mount, # D900, would work on your 2005 Jeep Liberty with rear mounted spare tire. The most critical measurements are going to be measurement A and E, see photo. As long as the distance out from the center of your hitch pin hole, 7 inches, and distance up to the top of the ball from the inside top of the receiver, 6-3/4 inches, will clear your spare...
  view full answer...
  
• Recommendations for an Adjustable Ball Mount with 3 Balls
  We have several 3-ball ball mounts. Curt # D900 is a popular option. Buyers Products makes a similar model, # 3371802225. It is most likely one of these two you are thinking of. But I also included a link to all of the 3-ball mounts that we carry and links to some video reviews.
  view full answer...
• Is Trailer Hitch Tongue Weight Capacity Significantly Reduced when Using An Adjustable Ball Mount
  When using the Curt Multi-Ball Adjustable Ball Mount, # D900, you should not have any problems as long as you stay within the capacities of the ball mount, trailer hitch, and your 2010 Chevy Silverado 1500. The D900 is constructed of solid steel which compensates for its length. Tongue weight could be an issue here. There are measures you can take to decrease the tongue weight such as moving more of the load towards the back of the trailer until the tongue weight is 10 to 15 percent of...
  view full answer...
• Extension For Towing a Horse Trailer Behind a 2007 Chevy 3500 With Camper In Bed
  I have something that may work for you as using a 12" Extension # 3371804015 will reduce your receiver capacity by 1/3rd. So with a maximum trailer weight of 7,500lbs on the receiver you would only be able to tow up to 5,000 with the extension. The Curt Multi-Ball Adjustable Ball Mount # D900 is adjustable and will not reduce your towing capacity. This hitch has a length of 15-3/4" from the center of the receiver pin hole to the center of the hitch ball. This is our longest ball mount...
  view full answer...
• Is the Curt Adjustable Multi-Ball Ball Mount Compatible with a Surge Coupler
  Yes, you can use the Curt multi-ball adjustable ball mount # D900 with a trailer that has surge brakes. There may be a little more movement associated with this ball mount since it is pinned in so many locations but that would not cause any problems with a surge coupler. If you want something more stable then you could use something like # C62KR but it is not adjustable. Or for something that would be more stable and still offer adjustability you could use # BWTS10048B.
  view full answer...
• Comparing the Curt Tri-Ball Mount D900 and Buyers Products Tri-Ball Mount 3371802225
  The Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 and the Curt Multi-Ball Adjustable Ball Mount part # D900 are both very similar. The main difference as you mentioned is that the Buyers Products Ball Mount has a longer shank which then allows for more rise/drop adjustments. The more rise/drop adjustments you have, the greater number of trailers you can tow level. In regards to the manufacturer, both Curt and Buyers Products are reputable brands so I would not let this alone...
  view full answer...
• Adjustable Channel Ball Mount with a 2 Inch Ball for a 2 Inch Trailer Hitch
  The 2-ball format is the only version of the Curt adjustable ball mount # C45900 but we do have many other options. I f you can tell me the capacity you need I can make specific recommendations. Other popular option include the 5K rated Convert-A-Ball ball mount # TK5007 and the Curt tri-ball ball mount # D900 rated for 10,000 pounds. I have included a link to all the adjustable ball mount options for you.
  view full answer...
• Dimensions of the Bolt Holes to Mount the Replacement 2 Receiver # C45802
  The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is 1-1/2" on center (3" for every other bolt hole) they are not compatible with each other. This receiver is actually the replacement for the Curt Multi-Ball Adjustable Ball Mount # D900 so for the shank you will need part # C45059 instead.
  view full answer...
  
• Weight Capacity of Replacement 2" Receiver # C45802
  The part # C45802 shares the same capacities as the ball mount it is designed to fit part # D900. Which is 10k when using the largest ball size of 2-5/16 inch.
  view full answer...
• Can Curt Adjustable Ball Mount Part # D900 be Used in Rise and Drop Position
  The Curt adjustable ball mount part # D900 can be used in the rise and drop position. It can do a drop of up to 5-3/4 inches and a rise of 4 inches. To eliminate rattle like you asked about the u-bolt style anti-rattle device part # e99007 would work great.
  view full answer...
• Size of Ant-Rattle Bolt Included With Replacement 2" Receiver for Curt Multi-Ball Ball Mount
  If you're referring to the bolt that comes with the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 that is actually the anti-rattle bolt. It is 1/2" - 13, 1", grade 5. If you are referring to where it mounts to the # D900 it uses 5/8" hitch pins or locks like # e98881.
  view full answer...
• Best Trailer Hitch for 2018 Ford Escape
  The best trailer hitch for your 2018 Ford Escape is the etrailer.com Class III part # E98866. This is because it features a sleek hidden crosstube design where only the 2 inch receiver is visible behind the vehicle (see attached image). Its unique matte black finish also provides a rugged look so even the small portion of the hitch that is visible still looks great. The Class III hitch will use existing holes in the Escape for a no-drill installation and provide you with a 2 inch receiver...
  view full answer...
  

Do you have a question about this Trailer Hitch Ball Mount?