bing tracking image
  1. Trailer Axles
  2. CE Smith
  3. 1800 lbs
  4. 57-1/2 Inch Long
  5. 5 on 4-1/2 Inch
  6. No Drop or Lift
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K

CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K

Item # CE33201GA-HUB
Our Price: $342.04
Trailer Axles
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer. Great Prices for the best trailer axles from CE Smith. CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K part number CE33201GA-HUB can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (41)
  • Q & A (0)
  • Photos

CE Smith Trailer Axles - CE33201GA-HUB

  • 1800 lbs
  • 57-1/2 Inch Long
  • 5 on 4-1/2 Inch
  • No Drop or Lift
  • 46-1/2 Inch Long
  • Leaf Spring Suspension
  • Idler Hubs
  • CE Smith
  • Standard Spindles

Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.


  • Square axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • Galvanized steel axle is sturdy and provides corrosion resistance
    • Great for boat or snowmobile trailers
  • Reversible straight beam can be used for underslung or overslung applications
  • Seatless design - does not require spring seats
  • Straight spindles - no drop
  • Galvanized idler hubs are sturdy and corrosion resistant
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and high-performance synthetic grease included


  • Weight capacity: 1,800 lbs
  • Hub-face-to-hub-face length: 57-1/2"
  • Spring-center-to-spring-center length: 46-1/2"
  • Overall beam length: 62"
  • Hub bolt pattern: 5 on 4-1/2"
  • Tubing width: 1-1/2"
  • Spindle size: 1-1/16"
  • Grease cap outer diameter: 1.983"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 15"

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner/outer bearing: L44649
  • Races (included)
    • Inner/outer race: L44610
  • Grease seal (included): RG06-020
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

Corrosion Resistance for Marine Use

Galvanized steel parts are great for marine use because they are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding, making them a good choice for boat and snowmobile trailers.

All GAL-DEX hubs undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater

Axle Dimensions


There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring centering hole on one side of the axle to the spring centering hole on the other.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

33201GA CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1,800 lbs

8-258-50UC1-EZ Dexter GAL-DEX Trailer Hub Assembly with Bearings, Races, and Seal for 2,200 Pound Axles - EZ Lube

457458 Loctite Viper Lube High Performace Synthetic Lubricant - 14.1 oz Can

California residents: click here

Customer Reviews

CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K - CE33201GA-HUB

Average Customer Rating:  4.7 out of 5 stars   (41 Customer Reviews)

Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.


Great product. I bought the harbor freight trailer last year and within a couple of weeks I had problems with one of the Hubs. The bearings went bad and the made in China hub had a crack in it. Could not find an exact replacement and tried a bunch of trailer stores around the Chicagoland area. Then a few months later the other hub started to wobble when I got home and replaced it also with a close match but not perfect. Every since then the camber was off and I didn't feel safe driving on the highway. After a year of looking I finally found this website and they had the Hubs and axle to replace the bad quality of the made in China original one that came with the harbor freight trailer. Took a couple of easy hours to replace and I couldn't be any more happier. Drove it on the highway for 50 miles and everything is still nice and tight so far and it looks way better too. Plus, the easy lube system is the best part! George kept in contact with me from the beginning to the end letting me know that it shipped and that it arrived at my house. 2 days to get to my house! I will be back to purchase more things in the future!



Still going strong with no issues what so ever. Best part is the yearly greasing of the hubs. Take the cap off and grease up until all the old grease comes out! Money well spent!


It’s a great looking axle. This is perfect fit for the trailer I purchased from the discount hardware store. Straight forward to install. It was a pleasure working with everyone at etrailer. Couldn’t be happier. i have just one outstanding question. My old axle was round 1 3/4”. Are most people reusing old bracket (which I decided to do) or buying square bracket and if so what size? i have included some pictures of trailer and also some closeups of bracket holding axle to spring.
Once again a pleasure doing business with etrailer.

Etrailer Expert

Mike L.


Since you now have an axle with a square tube, you really should use a U-bolt kit that features square U-bolts like CE23102.


I have used this axle for about a year now and made several trips of 300 to 400 miles round-trip. I have had no problems at all and the trailer pulls well. I used this axle and hub assembly to upgrade the cheap axle that came on my Harbor Freight folding trailer. This axle was a direct fit and no modification were made to the trailer. I did pair this with 15-inch radial trailer tires, so I could not use the original fenders that were sized for 12-inch tires. I simply went to my local farm supply and grabbed a couple of fenders for 15-inch wheels and a couple of angle brackets from the local hardware store and I was back in action. I use this trailer to carry two Hobie Outback kayaks and fishing/camping gear behind my Subaru Outback.


Perfect replacement - thank you for the guidance.


Not as described or shown in photos. These are not easy lube spindles. Took over 2 weeks for the wrong axle to arrive. All boxes were very damaged upon arrival and missing some parts.

Etrailer Expert

Jenny N.


This axle should definitely come with EZ lube spindles. I am sorry that the axle was incorrect and arrived damaged. Customer Service will be in contact with you.


I shopped locally for a new axle for my boat trailer but found exactly what I needed at e-trailer and at the best price anywhere. I was surprised at how quickly it arrived. When I found one of the parts was damaged in transit, I e-mailed the company and they got back to me almost immediately. I had the new part inside the week. I am very impressed with both the quality of the components and the level of customer service. I will definitely buy from them again.


I have an 79 ski boat and trailer I'm restoring and the trailer axle was one of the last things I needed. The price was what I expected and shipping was very reasonable.I've never replaced an axle before so the product description and measuring instructions helped a novice like me get exactly the right one. The axle and hubs were easy to assemble and the "customer also bought" section on the website showed me the right mounting hardware. I haven't towed it yet but I expect no problems. I also bought the springs and custom hitch from etrailer and are very satisfied. I would recommend etrailer to anyone to get it right the first time.

Stephen L.


Rolling good with no problems


Fit in place just like the old one I replaced. Working well to this day.


etrailer was temporarily out of stock and had to wait 3-4 weeks. I received a phone call from them after about 4 weeks when it looked like the ETA was getting close. They asked if I wanted the 3 day shipping refunded and whether or not I preferred to wait longer. Really great customer service. A week later it arrived.

This axle/hub setup is a perfect fit for the Haul Master Super Duty Folding Utility trailer from Harbor Freight ITEM#62671. Also purchased was item "Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range D" Code AM30859 Tires/Wheels.


Well built galvanized should last me a long time. Thank you


I bought a new Harbor Freight trailer and after assembly was unhappy with the quality of the axle and hubs. Because of all the time and effort put into assembly I did not want to try to return it, besides the frame of the trailer was great for the load I will be carrying. I just couldn't trust those hubs to go the distances I needed. The C.E. smith axle was just what I was looking for. It fit perfect took less than an hour to install and increased the load capacity. With the addition of the 5 on 4 1/2 hubs and galvanized wheels it looks great also. My only mistake was not knowing exactly what I was looking for and needing to cancel and re-order twice. All my fault. Be smart, take advantage of the superior customer service and you will get it right the first time. once I got over the whole being a man and not asking for directions trip, Lisa D. took over and everything went perfect. She was very patient and kept me informed and up to date with emails and telephone calls. I will definitely use e-trailer again for any trailer needs I may encounter


Nice upgrade of the axle on my [online] trailer. I had no confidence towing my home made teardrop camper until I installed this axle. The package was damaged in shipping and eTrailer quickly replaced the missing parts.


The axle and hub kit arrived on time, un-damaged and fit as advertised. Replaced old axle on my boat trailer. Installation was simple and went as planned. I love the ease of re-greasing with the grease in place hubs. They make routine maintenance simple. Have used for almost 1 year on my boat trailer with no issues!


I had to replace the axle, hubs and leaf springs and wheels on my utility trailer and wasn't sure what I needed or how to measure for the right parts. The gal that helped me (sorry, can't remember your), was very patient and walked me through all of the steps to determine the correct part numbers for the application.

Every part was correct including the U-bolt kit and bolts for mounting the leaf springs. It all went together smoothly and the trailer is back on the road.


The axle and hubs were received exceptionally fast for free shipping. The products are reasonably high quality for the price. I am still in the process of installing them but they are going together easily and quickly and will do exactly what I need them to do. (Mid summer is not the time for a boat trailer axle to collapse!) Great product. The only glitch, and it has nothing to do with the quality of the product, is that the two grease cups were crushed beyond use I assume during shipping. I would recommend this axle assembly to anyone.


Exceeded my already high expectations. I live in rural Hawaii and my complete boat trailer axle down to tires was delivered within a week of order with reasonable shipping charges.. Local place gave me runaround 3x already. This saved me. Now I can go fishing again!

Dimensions and sizing can be difficult, even if you are used to these things but trailer makes it super ez.. With videos and detailed things. Thank you, I will definitely do business again!!!


Everything fit perfectly for the axle/hubs/bearings upgrade to me 1,850 lb. 4X8 Harborur Frt. trailer. May have been a miscommunication but I thought it would arrive fully assembled and lubed. It all came in pieces for me to assemble and without instructions. But it all worked out ??..


The trailer that this axle went on has two cross country trips each one about 3,400 miles or more with at least a 1,000 lbs in the trailer each trip. It was so smooth that I often forgot the trailer was there. This axle was quick and easy to install and came with everything needed to complete the job. I have no regrets and I would get this again if I ever need one.


The replacement axle and hubs are excel lent!

Roger R.




I received this product yesterday and had the trailer up and running in a short time. The only problem was the tube that the shaft came in had broken open during shipment and one of the cotter pins got lost in shipment. I went out and purchased the replacement. This axle was used to replace a damaged one that I have that used to belong to my step father. He and I used to work seven days a week on a sod farm until he became ill and passed away.


If you have a bad axle and this axle fits this is the one to get it's rated for 1800 lb The galvanized hubs and axle looks really good and when I put it together it went together very nicely


I was impressed by the friendly and helpful service I received. The the product I chose was based on my old axle which broke. It worked well under my one place snowmobile trailer and allowed the standard 8" wheels to fit well .


e-trailer exceeds all expectations they are the number one for trailer parts and accessories and their customer relations are second to none


The end caps are not tapered so when you install it is hard to not ruin. Also the threads on end of one side of spindle were a little bit bent, had to clean up with file. Other than this, it was a breeze to install and now my trailer sticks to the road like glue.


Haven't installed the parts yet. Ordered what I thought was correct. Erika called me and pointed out I ordered the wrong U-bolts for the axle I selected. She even stayed on the phone while I went outside (with my cell phone on speaker) and measured all the dimensions of my broken axle. Received the parts today. Hoping to have it installed tomorrow.

Show More Reviews

See what our Experts say about this CE Smith Trailer Axles

  • How to Add Axle to Boat Trailer to Prevent Trailer Sinking Into Wet Sand
    I understand what you're looking to do and it certainly could be possible to add another axle (and hubs, wheels and tires) that does not have a set of leaf springs suspending it to better distribute the loaded trailer's weight on that sandy beach surface. To get you started I linked our main axle page which displays both regular beam axles like # CE33201GA-HUB as well as the Timbren axle-less suspension kits like # A12WS545 which bolt right on to the trailer's frame. These kits can be...
    view full answer...
  • Galvanized Axle for Use in Salt Water
    There is a galvanized axle we offer, though the Dexter Trailer Axle w/ Idler Hubs # 35545I-EZ-89 is not galvanized and is made of steel. When putting axles in salt water repeatedly, there is no way to completely prevent corrosion, but it can be slowed down by methodically hosing off the salt water as soon as possible after each use. For galvanized axles the only options we have is the CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles - Galvanized - 57-1/2" Long - 1.8K # CE33201GA...
    view full answer...
  • Should Galvanized Axles Be Used on Boat Trailers
    For a boat trailer, you'd really want to use a galvanized axle. We offer a galvanized boat trailer axle from CE Smith as part # CE33201GA for the axle beam only or # CE33201GA-HUB the axle and hubs. The axle has an 1800 lb capacity, and a hub face to hub face dimension of 57-1/2 inches. The spring seats are 46-1/2 inches apart on center. If you need a different sized axle, you'll need to custom order one from your local trailer supply house.
    view full answer...
  • Tires & Wheels for 86 Jayco Pop Up with 2.75 Pilot Hole & Wheel Bolts
    There may be a solution but I do not have 8” or 10” wheels with 2.75” pilot holes. They are all 2.5” pilot holes. I have 12” wheels with 2.84” pilot holes. For example, Kenda # AM30790 is a 5.3 X 12” trailer tire with a 2.8” pilot hole, load range C and 65 mph. Kenda # AM30780 is a 5.3 X 12” trailer tire with a 2.84” pilot hole, load C, 65 mph. Kenda # AM3H370 is a 205/65-R10 trailer tire with a 2.5” pilot hole, load C and 81 mph. If you were using lug nuts (instead of bolts) then only...
    view full answer...
  • How to Adapt CE Smith Trailer Axle Kit CE33201GA-HUB for 55-1/2-Inch Spring Spacing
    We do not have axle kits with a 55-1/2-inch spring center spacing but you can still use an axle like # CE33201GA-HUB so long as it is rated properly for your application simply by having two steel spacers like # 01077-011 welded at the appropriate positions on the axle tube. You may just need to enlarge the holes to match the size of the nuts on the spring stacks before you have them welded on. It is not a good idea to drill new holes in the axle as this could reduce its capacity. This...
    view full answer...
  • How To Put A Trailer Axle On A Barbecue Pit
    I do have several axles available however, they may need to be modified to work with your application as the narrowest axle we have in stock is the CE Smith Trailer Axle w/ Idler Hubs part # CE33201GA-HUB. This axle measures 57-1/2" from the face of each hub and 46-1/2" from spring center to spring center. The spring center of the axle is the recommended mounting location to place the support that will be responsible for carrying the load for a leaf spring suspension that is usually attached...
    view full answer...
  • Why Can't CE Smith Trailer Axle CE33201GA-HUB be Used with 12 inch Wheel
    The wheel mounting flanges on the hubs that come with the CE Smith Trailer Axle part # CE33201GA-HUB are only compatible with wheels that are between 13 and 15 inch in diameter. Basically the flange is too big to fit behind a 12 inch wheel.
    view full answer...
  • Recommended Axle For Salt Water Boat Trailer
    Start with the axle. Are you looking for something galvanized? We have the CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 Bolt Pattern - 57-1/2" Long - 1,800 lbs # CE33201GA-HUB which is galvanized and has all the components you'd want for salt water use to stand up strong to the abuse the salt brings. If we have a system like this to meet your needs, it will come with the seals, studs, hubs, etc. If not we will piece it together and use the best corrosion resistant materials available...
    view full answer...
  • Finding Replacement Axle For Jet Ski Trailer
    The closest standard axle we have available to the dimensions that you mentioned is the CE Smith Trailer Axle Beam # CE33201GA. This galvanized trailer axle has a spring center measurement of 46-1/2 inches and a hub face measurement of 57-1/2 inches. It has an overall length of 62 inches. Since we do not have a standard axle that meets the dimensions you are looking for, another option is an Axle-Less system like the Timbren Trailer Suspension System # ASR1200S04. This system will provide...
    view full answer...
  • Replacement Axle for Early 80s Coleman Pop-Up Camper Trailer
    None of our beam trailer axles have the 53-inch hub face and 41-inch spring center dimensions of the original axle on your older Coleman pop-up camper trailer. The closest axle kits we have are parts # CE33201GA and # CE33201GA-HUB, both rated for 1800-lbs. These are 57-1/2-inches from hub face to hub face and have spring centers at 46-1/2-inches. However, we do have another option that will allow you to replace the axle: a Timbren axle-less suspension kit. These unique trailer suspension...
    view full answer...
  • Replacement Axle for Trailer with 46-1/2 Inch Spring Center
    Unfortunately, we do not have any trailer hubs with the bearings that you need. Would you be open to replacing the entire axle? This would be the only option we have for you. If so then I would need you to measure the distance between each hub face and the spring center. I would also need to know the capacity and if it is a leaf spring or torsion system.
    view full answer...
  • How To Raise a Square Axle Boat Trailer with Drop Axle
    In order to raise your boat trailer you are going to want to swap out the drop axle that you have now for a straight axle as that would then give you the additional clearance that you need. In order to make sure we get you the correct straight axle I would need to know what your axle capacity is, the hub face to hub face measurement, and the spring center to spring center measurement. For example, the CE Smith Trailer Axle w/ Idler Hubs part # CE33201GA-HUB has a 2,000 lb capacity, 57-1/2"...
    view full answer...
    Image 1 for Image 2 for
  • How Much Does CE Smith Trailer Axle part # CE33201GA-HUB Weigh
    The CE Smith Trailer Axle part # CE33201GA-HUB that you referenced weighs 16 lbs.
    view full answer...
  • Replacement 1-1/2 Inch Square Axle for a Boat Trailer
    I do have some options for you but none of our trailer axles match the exact measurements that you provided. Therefore, the best option we have for you would be to switch to an axle less system like the Timbren Axle-Less Trailer Suspension System part # A20RS545 which will replace the axle, leaf springs, and leaf spring hangers in light of a rubber suspension system that works to absorb road shock and support the trailers load better than standard leaf springs. The other option you have...
    view full answer...
    Image 1 for
  • How to Determine Axle Capacity When No Labels Are Present
    The only way to determine the capacity if there are no labels on the axle, is to go off the spindle and hub as well as the overall weight of the trailer when loaded. For the spindle, you will want to pull off the hub to get at the inner and outer bearings. If it is a straight spindle, you will have the bearing # L44643, which would have an inner diameter of exactly 1 inch, or you will have the # L44649, which has an inner diameter of 1.063 inches. From there, you will need to determine...
    view full answer...
  • Trailer for Hobie Kayak That Can Withstand Saltwater
    We do carry a number of trailers which are designed to be corrosion-resistant. The Malone MicroSport Trailer # MPG460G has a galvanized steel frame as well as galvanized wheels and coated steel crossbars; this trailer has a 375 lb capacity. For something with a larger capacity there is the Malone MegaSport Kayak Trailer # MPG535 which is also made of galvanized steel and has a 1,000 lb capacity.
    view full answer...
  • Small Boat Trailer Axle Replacement Recommendation
    The shortest axle we carry is the CE Smith Trailer Axle w/ 5-lug Idler Hubs # CE33201GA-HUB which measures 57-1/2" long and has a spring-center measurement of 46-1/2" but if you're willing to switch to a different axle style we have the Timbren Axle-Less Trailer Suspension System w/ 5-lug Hubs # A35RS545 instead. The advantage of the Timbren kit is that these bolt directly to your trailer frame and operate on independent Aeon springs so you don't have to measure and choose something with...
    view full answer...
  • Upgrading Or Replacinging Axle, Hubs, Tires, Wheels And Springs On A 2008 Jet Ski Trailer
    Hey Steve, I can definitely help with this. A lot to unpack here so I will do my best to cover everything. Let's start with the axle/spindles, since that will directly tie into what hubs, wheels and tires we end up going with. As far as the axle, we do not have anything with a 54" hub face (HF) measurement. We do have the CE Smith Trailer Axle # CE33201GA-HUB, which has a 57-1/2" HF measurement. It is rated for 1,800 lbs and the axle itself is a 1-1/2" square tube. This axle also comes...
    view full answer...
  • Replacement Boat Trailer Axle w/ a 57-1/2" Hub Face and a 46-1/2" Spring Center
    We do have one axle with hubs that is extremely close to the dimensions you have requested. It is the CE Smith Trailer Axle w/ Idler Hubs item # CE33201GA-HUB. It measures 57-1/2" long, has a 46-1/2" spring center, and an 1,800 lbs capacity. This axle includes two idler hubs with a 5 on 4-1/2 bolt pattern.
    view full answer...
  • What Information is Needed to Replace Trailer Axle
    To order an axle, you will want to know a bit more information. First, you will want to know the hub face measurement. This is considered the length of an axle. The hub face is measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle. You will also want the spring center measurement. The spring center is the approximate width of your trailer. This is measured from the center of the spring center hole on one side of the axle to the spring...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for a 2016 Hyundai Tucson
    For your 2016 Hyundai Tucson the Hidden Hitch part # 87692 that you referenced has been confirmed as a fit and would work well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right...
    view full answer...
  • Replacement Axle with 56-3/4 inch Hub Face Measurement
    The closest trailer axle we currently have available to the dimensions you provided is the CE Smith Trailer Axle w Idler Hubs # CE33201GA-HUB. This galvanized steel axle has a hub-face-to-hub-face length of 57-1/2 inches and a spring center length of 46-1/2 inches. This is awfully close to what you currently have, so I recommend verifying your measurements to see if this will work. This particular axle has a weight capacity of 1,800 pounds and includes idler hubs with a 5 on 4-1/2 inch...
    view full answer...
  • Recommended Firestone Air Springs For 2007 Ford F-150 & Trailer Axle Compatibility w/ 12 Inch Wheel
    For your 2007 Ford F-150, I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2350 which are a confirmed fit. The fact that it is not heavy duty suspension and without 5th wheel hitch doesn't come into play. These air springs will mount to your frame and current suspension system. It will allow you to adjust air as needed between 5 psi and 100 psi. If you want to bypass the manual adding and subtracting of air, you can add the Firestone Air Command...
    view full answer...
  • Does the CE Smith CE33201GA-HUB Come Pre-Greased?
    The CE Smith Trailer Axle w/ Idler Hubs # CE33201GA-HUB does come with all the bearings, hubs, and grease but it is not pre-greased.
    view full answer...

< Previous

Do you have a question about this Trailer Axle?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.