Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 31-1/2" long x 13" tall. Made of 16-gauge steel, this round fender is pre-galvanized for corrosion resistance, and it can be painted to match your trailer. You get both a stylish look and years of use.
Features:
Specs:
Pre-Galvanized Steel
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (132 Customer Reviews)
9" Wide x 31-1/2" long x 13" tall. Made of 16-gauge steel, this round fender is pre-galvanized for corrosion resistance, and it can be painted to match your trailer. You get both a stylish look and years of use.Very nice, heavy duty galvanized fenders. Exactly what I needed to replace my aging cracked plastic fenders. Scrub them down with some comet to remove oils. Prime with self etching primer. Finish with enamel. Good to go. Pre drilled some holes. Bolted them up. Quick easy project.
Very well made galvanized fenders.
They’ll provide great coverage over the tires .
I had a creased fender on my travel trailer. I looked at many fenders online trying to find something that would match. This fender was less than an inch wider and inch longer. Once installed you could not tell the difference to the other fender unless you measured it.
Very nice. I made a mistake. Thought one side was flat fender back to bolt on? I think I need the bracket. The previous fender bolted direct to the trailer. Please let me what will work best. Thank you.
Jenny N.
5/14/2024
The brackets that you need is part # CE26098G-2. You will need to drill holes in the fender to use the brackets.
Excellent! These fenders were exactly what I needed when upgrading my trailer from 12 to 15 inch wheels.
Great replacement for damaged trailer f ender
Sammy
3/30/2024
Better quality than the one that came with trailer. Blow out tire was the reason for purchase. Along with tire and rim
Nice sturdy fenders. Better than the ones I took off. They're going to look good on the boat trailer.
Fast and excellent service! Always above and beyond!
My shopping experience with etrailer has always been Great! Their very fast order processing and shipping is Fantastic! Being able to track my shipment at any time is Amazing! Shipments always arrive well packed and are as described on their website! I always recommend etrailer to all my friends for their trailer or towing needs!
These are a nice medium weight metal. These will be the basis of my wheel "tubs". I needed the longer arch to fit existing deck holes. The lower arc will be a ramp over the wheels for my flying machine to roll over. Strong enough to walk on. Perfect fit from the description. I always visit etrailer first and haven't shopped anywhere else for my trailer parts. Bought a hitch too. Great install videos and customer service.
Excellent customer service and was delivered sooner than I expected. Fenders where just what I wanted very strong and well made. I would definitely order again from them.
Fit perfectly on my trailer
Worked great. Easy install. Clamped in place, and marked for bolt holes. Took off and drilled 3/8 holes. Used 3/8 bolts, washers on both sides and a lock washer/nut. Sturdy enough to stand on. (Atleast for now)
Awesome quick and on time
This is perfect!!
Excellent service. Fast and well packed. Simply awesome. Fender matched and was simple to install.
Used these to redo a trailer. They worked perfectly, welded on just fine.
Best place for fenders I need.
The product was very strong and polished steel. I thought it would be more galvanized. For some reason I found the lower part of the fender was short about 3 inches for my application. My older fenders were longer. My tire is 14 inches and I had to add material to make it fit properly so that it would not rub the tire. Thank you
Exactly what I needed for a missing fender cover
This fender is extremely well made, packaged well for shipping. Heavy duty construction should hold up very well under extreme conditions.
This was the first time buying an item from etrailer.com and was straightforward and uncomplicated. As for the fender, the material is better than I expected. I am very please with my purchase. When I had a flat I lost a fender and was unable to find it. The new fender will complement the trailer to look normal with two fenders. Now, my wife can stop nagging because her trailer is repaired.
One of my boat trailer fenders was damaged when a tire blew. The other was badly mangled when I got clipped by a semi on the interstate. I got a pair of these to replace them both. As far as I can tell, these are the exact same fenders that came on my trailer. Very heavy duty and galvanized. Great fenders at a very good price.
I received the new trailer fenders about a year ago and I am very happy with the look and sturdiness of the product, as well as the prompt service I received for etrailers.
A good company to do business with.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob
9/17/2024
Trailer fender update. They’re holding up great. They are frequently submerged in salt water & still look great. I do rinse them off with fresh water. Would highly recommend them.