Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7" Wide x 25-3/4" long x 10-5/8" tall. Made of durable 16-gauge steel, this round fender helps to protect your cargo from road debris while you drive. Fender can be painted to match your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number CE17721. This is the CE Smith single axle trailer fender. The curved fender is going to cover one tire on your single axle trailer. Now fenders are going to act as splash guards, they're going to help keep road debris from hitting other vehicles on the road, and it's going to help protect whatever it is that you're hauling in your trailer's cargo area. This particular fender is going to be made from sturdy 16 gauge steel constructions. It's got the nice raw finish.
It can be primed and then painted to provide resistance to rust and corrosion and to match your trailer's paint finish. Now when it comes to the installation, you can weld this on or you can bolt this on. No pre-drilled mounting holes, so if you're going to bolt this on, it is going to require some mounting brackets for bolt on installation. Those are sold separately and they can be found right here etrailer.com. The product is made right here in the U.S.A. Again, it is designed for single axle trailers with 13-inch diameter wheels.
We're going to take a look at the overall dimensions of the fender, starting with the overall length measuring from edge to edge, that's going to give us a measurement. We're looking at about 25 and 3/4 of an inch long. It's going to give us an overall height measurement of 10 and 5/8 of an inch tall. If we take a look at the overall width measurement, measuring from edge to edge, it's going to be about 7 inches wide. With this part number you're going to get one fender and the fender itself is going to weight 5.4 pounds. That's going to do it for today's look at part number CE17721..
Average Customer Rating: 4.9 out of 5 stars (209 Customer Reviews)
7" Wide x 25-3/4" long x 10-5/8" tall. Made of durable 16-gauge steel, this round fender helps to protect your cargo from road debris while you drive. Fender can be painted to match your trailer.2000# axle with 13 inch wheels replaced eight inch wheels. Fenders seem to be very solid.
These fenders are great. I bought a 1968 aluminum boat and trailer last year. It had the original tires/wheels (10") and fenders. I wanted to upgrade to 13" tires/wheels. Once I widened the axle, I welded a 5/8" round fore and aft on the trailer frame, then welded the fenders into place. Primed and painted, and these look awesome. Great quality. Thanks etrailer.
Jc
6/13/2021
Fenders are still impressive. Look as good as the day they arrived. Ive since learned that I can even use them as a step- showing how well they are made.
I'm very happy with the CE Smith, steel fenders I bought for my teardrop trailer project. They are definitely sturdy, welded on nicely, and took paint well. A year later, and with 8 camping trips logged, I'm still very pleased with my purchase. The price was reasonable, and delivery was quick! Thanks!
Lyle
3/7/2020
My steel fenders have been on my camper for two years now and have held up very well. Paint stuck to them very well. Super happy with them.
Nice quality fender and packed well for shipping. etrailer is a stand-up outfit and although they have no control over the USPS, Stacey was there every step of the way. USPS had the box for a lot longer than they should have which gives them a lot of time to abuse the merchandise. Because it was packed so well, it was undamaged.
The site is very easy to navigate and they had what I was looking for on more than one occasion.
These fenders fit and look great thanks etrailer
All of my transactions with etrailer have been excellent, great products and exceptional service. In prior employment I worked for RCA as a Field Engineer so one of my duties was consumer relations and resolution of complaints in a seven state area in the South, so I know exceptional service. You guys are the model for any successful consumer related business. Thanks so much...I will be back for more. These fenders were used in th build of an off road RV.
As a side note I build hotrods and sometime back I bought a couple of fenders from your company for a Model A roadster that I am building. They fit like they were made for it as well as being wide enough to cover the fat rear tires and heavier duty too boot. So at car shows I make sure to promote etrailer as a reliable source for some great fenders for a hotrod.
Nice fenders with solid construction at a great price! etrailer.com provided great service- I ordered on a Saturday, and it was boxed up and ready to go that day. They provided fast shipment as well. They are going to look great over the wheels on my kit car! Very satisfied and would recommend them to anyone!
I’ve used this as a motorcycle sidecar fender for about a year now. I don’t remember exactly what I paid for it, but I remember it being reasonable with shipping. The quality is great, I broke off a chunk of metal where I had it mounted after repeated torture (no fault of the fender). I was able to weld it back up withou blowing through it. There’s plenty of metal on these, and would not hesitate to buy another one if I needed it.
Best selection to see and get the right part. Well described and presented. Last ones rusted from the salt water. Takes a little time and work to drill some holes and prime and paint them, but this small custom boat trailer needed it. Sure I could go aluminum but that even looks bad with time. I am sure these will last as long as the trailer.
Perfect size for our small boat trailer and 1year later no rust!!
Look great after paint. Had questions here but customer service was a wealth of knowledge.
I use these on old school custom motorcycle builds for the rear fender. They're perfect and the price is so much cheaper than motorcycle specific fenders which can be 3 to 4 times the cost. Thick enough to be welded and or modified however you want. Shipped out right away and arrived on time.
Almost done. Will send more photos with lights and ice chest bracket
I am pleased with these fenders. They are good quality and durable. They will be perfect for what I wanted. Thank you etrailer.
The fenders I ordered arrived fast and in good shape they made my trailer look like new.
My boat trailer was struck by an inattentive driver damaging one fender,tire and axle. The trailer being 20 years old was no longer in production and no replacement fender was available. The CESmith steel fender was a close match and being steel, a local trailer mfg. was able to make a very suitable replacement. Am able to enjoy fishing again and the trailer looks good and pulls straight. Thanks!
It match the other fender on my boat trailer and was easy to install.
Art
8/14/2023
The fenderis doing good. It was a perfect fit for my trailer and it looks good.
You could modify a little yourself for a rounder fit but, sits just fine as is for a 6" motorcycle and $[XX] cheaper.
Great Product fit well on the trailer and around the wheel
Great service n delivery, fair price
Works great
Wesley
1/5/2024
Still works exactly as I wanted . Expect them to continue working for many years to come.
Retro fitted a snowmobile trailer to haul my side by side. Fenders exceeded my expectations. Thanks. Great service, great fit, and great price
Jim
8/15/2022
Working like it should
I needed a fender for a motorcycle sidecar project and this fender will work well.
Good quality steel construction. Easy to install. Looks great after you paint them. Only took me 3 hour's to take the old ones off and install the new ones. Fast shipping too which is a plus.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken
10/21/2024
My fender mounting design is rock solid.