Arrives before Christmas 
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). Pre-drilled holes let you raise or lower your board.
Features:
Specs:
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the CE Smith heavy duty vertical bunk brackets. These heavy duty brackets let you mount a bunk board on your boat trailer. These are ideal for big bunk boards such as a three by eight or a four by eight. They simply stabilize one end of the bunk board. Additional brackets are required for the opposite end of the board. Those are going to be sold separately.
Again, available at etrailer.com. These brackets provide a 90 degree angle for vertical mounting on to a level boat trailer frame. It will require two half inch diameter u-bolts for installation, one u-bolt per bracket. Those are available and sold separately at etrailer.com. I would recommend part number CE15283GA-2. You're going to have three pre-drilled holes on each bracket that's going to let you raise or lower the bunk board during your installation and then you can secure the board vertically on its side between the brackets with a half inch bolt.
That's going to be sold separately as well. These are galvanized steel so there designed to do a great job at resisting rust and corrosion. They are suit able for salt water exposure. They're made right here in the USA. You're going to get two brackets with this part number. Taking a look at the dimensions real quick, going edge to edge, it's going to measure five inches.
Overall height, it's going to be about six inches tall. The distance between the trailer mounting holes, that would be these holes right here, on center, it's going to be three and 9/16 of an inch. The distance been the bunk board mounting holes, again, there's three of those, those are going to be separated on center apart from one another. Each one looks to be an inch and a half apart from the other. Then the plate thickness is a quarter inch thick steel. That's going to do it for today's look at the CE Smith heavy duty vertical bunk brackets..
Average Customer Rating: 4.8 out of 5 stars (64 Customer Reviews)
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). Pre-drilled holes let you raise or lower your board.Katie was awesome! My trailer is 15 years old & the part numbers I had are obsolete. Katie knows her stuff & was terrific about helping me get what I needed in a single order & not one part was wrong. She asked if I could give her some measurements, so I went out to the trailer with a measuring tape. She told me exactly what measurements she needed for each part & provided a current part number for each part I needed. She speaks very clearly & was happy to share her time & knowledge so I could get the parts across the country. I highly recommend dealing with this company. Thanks, Katie.
Refurbished trailer one 1 year with all parts from etrailer , could not have been any better
pleased with service or products purchased. Will not hesitate to order again for all my trailer needs !! Joe
All aspects of this transaction were top drawer excellent: the brackets themselves are heavy duty
pieces perfect for my application, and they even came predrilled and exactly accommodated the attached hardware without any additional drilling. Now that's what I call service!
The bunk brackets we ordered were just the thickness we had wanted. James EXT.79503 was very helpful in finding us just what we needed. Thanks so much!
Sturdy with a good galvanized coating. Its holding up well in our coastal environment.
These brackets were exactly what I ordered. I haven't installed them yet, but I'm sure they'll work just fine. I found similar brackest for much more money at other sites! Shipping was very quick and free!!!
They are exactly what I needed. Heavy duty for a solid mount.
Good.
Ordered these on 2 day shipping. They showed up in one day! Product was very heavy duty and u bolts fit perfect. Exactly what the description said!
Great Service
perfect
Thanks so much for following up on this. The parts all fit as expected.
Product looks excellent
Parts look great and fit exactly as I e xpected
The trailer bunk supports were back ordered, that took some time, but once they arrived it was exactly what I ordered. I would include a link to the matching bolts and nuts for this product. Even after contacting a sales rep I was unable to find them, had to by them from ACE. But the trailer is safely repaired and I like the product. The gate hinges were a good match and welded right on. They should hold up much better than the home made factory hinges.
Went so smooth and quick, actually in stock and shipped quick which is very rare these days of no one wants to work, no parts etc etc
Exactly what I needed for boat trailer repair fast checkout and shipping!
Used these brackets to install new doubled 2x8 vertical bunk supports. Brackets worked great. Easy to intall, extremely well made and far far stronger than what my 2,000-lbs 19 foot bayboat needs, which is a good feeling.
My trailer had been stored outside for several years. The metal, wood and carpet had deteriorated to a point the trailer could no longer be used safely. I searched for parts at all local suppliers but no one had all the parts I needed in one place. I searched the net and discovered etrailer.com. I ordered everything I needed and the parts were delivered 4 days earlier than the promise date. I recommend etrailer.com without hesitation.
Excellent!!! These things worked great in helping me rebuild my trailer!!!! Thank you all very much!!!!!!
Good product on tome
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.