To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This adapter is specially designed to attach to the receivers in your Ford or Chevy/GMC's factory, underbed 5th-wheel towing prep package. The base then provides the attachment point for your Curt 5th-wheel legs or roller.
Features:
Specs:
Note:
Average Customer Rating: 4.8 out of 5 stars (445 Customer Reviews)
This adapter is specially designed to attach to the receivers in your Ford or Chevy/GMC's factory, underbed 5th-wheel towing prep package. The base then provides the attachment point for your Curt 5th-wheel legs or roller.Like some other posts, followed instructions to the letter and hitch would not drop into rails. Loosened all the rails bolts, mounted hitch, and re-torqued everything. Puck mounting brackets were just off square a bit and twisted the rails when first installed. Either square ‘em up or alter instructions so it goes in first time. Installed in a 2022 Silverado 2500 6’10” bed. Loved the plan, set the rails first time in a few minutes (instead of waiting in a shop for four hours while someone else did the boring and cutting and such). Hitch has been in two other trucks with conventional rails and always fit. Coulda been a five star, but I am familiar with Curt and feel sure they will get it right.
Great product. Bought a new F250 with puck system and this product adapted my hitch to the puck system. I did have to drop the head of my hitch because the adapter raises it 2.5 inches. Feet on my Curt A16 fit right into the rails on adapter.
Ron
5/20/2024
Still doing a great job. I have an overhead hoist in my garage so I can remove adapter and hitch as one unit leaving me with a clean bed. unit into pucks in bed and turn four handles and we’re ready to go! Great product.
Chris R.
5/23/2024
Purchased a 2024 Silverado 3500 set up for 5th wheel with the PUCK connections. My previous truck had ISR rails and the PullRite SuperGlide 5th wheel hitch. The Curt adaptor is the perfect solution to avoid buying a whole new hitch.
The package arrived in good condition and on time. Upon opening the box I was extremely surprised how well it was packed, each corner had a metal bracket, there was a piece of plywood on the bottom and top and foam separating the parts.
The install was fairly easy, read the instructions, Chevy is one way, Ford another. The PUCK locking mechanism make a nice tight connection with very little adjustment needed. The rails fit in nicely and the bolts went in well, torqued as required.
I have not yet attached the PullRite hitch but if it fit the Curt ISR rails on the previous truck it should fit this one. With the Chevy 2500 I had, between the squat and ISR rail setup the 5th wheel was slightly lower in the front. With this Chevy 3500 suspension and the adaptor being about 2" higher I expect the camper to be level or slightly higher in front which works.
Very nice adaptor if you have the need, better than changing out a perfectly good hitch.
Incredible fast shipping. Very easy installation. And all went together as it should. Some of the YouTube I seen said bolts were hard to get in place so I was prepared for it but to my delight all fit perfectly and it came mostly built with puck handles already built. All I did was attach cross bars. Very happy with everything so far but haven't towed on it yet.
Jim
8/23/2024
Works great. Anybody could set it up . If you have a old hitch and you got a new truck with a puck system I highly recommend this and the etrailer company. Mine was at my door in 2 days. Love the unit and the convenience.
This rail adapter work like i wanted it to. Saved us from having to purchase a New 5th hitch
Really wanted to give this 5 stars but it appears they didn’t try it with a hitch like mine. The flanges on the cross supports do not allow my hitch to seat down onto the support tubes. Thus the hitch holes will not line up with the tube holes and the pins cannot be inserted. I fixed it by taking a sledge hammer to the ears on my hitch until the holes aligned. I shouldn’t need to do that to something this expensive.
Jenny N.
3/19/2024
It is a shame that you had to use a sledgehammer to use the rails. I wanted to ask which brand of hitch do you have?
Easy to put together, good quality parts, went right into the back of the truck just like it was supposed to. The BW 5th wheel hitch that I had matched right up. I did have to lower the plate 1 bolt hole but that was no big deal. Overall I am very satisfied with this.
Have not gotten to tow yet but everything went together fairly easy. One major disappointment was the shipping and the packages were dumped in my driveway. Also it was not clear if I should use the spacers on this while installing the A16 hitch. I tried to get them to fit but could not get the pins to fit so I removed the spacers.
After purchasing a new truck, I needed an adapter for the Chevy puck system without buying the entire 5th wheel hitch, this fit the bill. Heavily built and easy to install. The only thing I would recommend is to use larger cotter pins because the ones that came with assembly would not engage the castle nuts.
Bought a new truck with the factory puck system because I wanted a full bed floor, so this was needed so I could use my 5 th wheel hitch
It fit perfectly in my F250 Super Duty, had to adjust the lugs that go into the bed that was easy, my hitch fit no problem, haven’t hooked the fifth wheel up yet removed it to check the ease worked great
Easy install! Fits perfect! 2024 Silverado 2500. Still had room to close the hard cover.
Kim was fantastic. My 20000 husky 5th wheel 15 years old fit right in the rails. That was our only concern.
Packaging was the best I have ever seen. Thanks Kim and e-trailer for the curt puck system adapter for my new 2024 denali 3500.
Everything fit perfectly. I thought there was a bit of play when the arms were locked, so placed a .005" shim under washer. Probably was fine but tightening it one slot was too tight to move arms. Unit was really heavy construction and should outlast me! Quick shipping and staff is excellent. Thanks, George
I have always had rails on all of my fifth wheel hitches. This is the first puck system I have had.This is amazing
Frist order was wrong. Not a happy camper as I was not able to bring my new fifth wheel home the day of purchase. Talked with Joshua at etrailer, he helped me with a new order, it arrived two days earlier than expected. Assemble was easy. waiting to bring new fifth wheel home. Thanks Joshua
The holes didn’t line up had to Grid to make bigger and took out the rubber shims. When I watched the video it said the hitch rails would be 2 inches higher than the bed it is 4 inches
Sierra K.
7/18/2022
I reached out to the manufacturer and they said their product page says the height should be around 2.5 inches. It sounds like your bars were installed upside down or backwards.
Assembly and setup was super easy and quick. Seems super stout. I was worried the added 2 1/2 inches of height added by this would require some adjustments to the pin box. However once hooking up my trailer, no adjustments were necessary. Trailer is almost spot on level, and I am still maintaining 6.5-7 inches of bed side clearance to the trailer.
This is definitely a quality part. I've had it a year, easy to swap between my fifth wheel and gooseneck plate. It installs or comes out easily, it fits securely in my 2023 Silverado 3500. I've pull all of the 25000lbs it's rated for without issue. I highly recommend it. It allowed me to use my fifth wheel and gooseneck plate from my old truck that had rails in it.
It was very easy to assemble and install. Maybe 10 minutes because I had to grab a wrench. It was also in question if it would work with other brands and in my case no problem working with my Reese hitch. It as able to email correspond and have my questions answered very quickly.
Easy assembly, fit well. Works just like it should. Put the hitch at a good level to level 5th wheel.
James
3/22/2024
Good as the day I installed it
Easy to assemble and install. Love that it snaps into the puck system in the truck bed and allows me to remove the entire hitch using an electric hoist, easily.
One half hour after UPS dropped off the rail kit, the Reese hitch that was in my 2018 GMC (drilled rails) was in my new 2024. Only minor issue was adjusting the tension of the locking bolts.
Way to go etrailer, my order was received and with in two days my new adapter base for my new truck came in great condition and i installed in less than 15 minutes along with the spider insert I had from my previous purchase it fit like a glove Thank you for a great easy web site with all the info one needs to get the right product your company that has never let me down in my three orders that I’ve made
Works perfect for factory puck system. Solid product.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larrys
4/1/2024
Still satisfied, still recommend. Easy to move hitch in truck as one unit when I need more of the bed available, no further adjustments needed.