To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.
Features:
Notes:
A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning. (In other words, the car signals a turn by flashing the brake light.)
A separate lighting system, or 3-wire system, has the brake signal and the turn signal light up independently of each other. Typically, the turn signal is amber.
To keep the separate lighting system on your car functioning properly while you're flat towing, add a wiring converter (118158 - sold separately) and 2 additional diodes.
If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit. Without a relay, your car's brake signal will override the turn signal sent by the RV when you are slowing down to make a turn, creating a potentially dangerous situation. Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (33 Customer Reviews)
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.Your service is horrible! Your answering service is slow and full of excuses on everything. You say in your ad professional service. Your company is far from that. The people answering the phone are NOT knowledgeable on the products you sell! They just want to send you the 1st thing they see. They don't explain there a 2 products that do the same thing, but the difference between the two. Takes hours for phone calls to be returned. Can't talk to managers. Many excuses for that. We had to cancel our vacation because of your Lack of professionalism, knowledge and excuses. Also your ad says guaranteed lowest price. We were told they couldn't do that!!
This is the simplest solution I found for wiring my 2015 Fiat 500 Pop for towing. I like the simplicity of just plugging the harness between the vehicle wiring and tail light fixture without having to cut or splice any wires.
Minus one star because the wiring extension to the front of the car came up short by about at least a foot from the front center where my plug attaches to my base plate. Not a huge problem for me because I am wiring a 6 pin socket that attaches directly to my Blue Ox base plate. I just used the wire included to connect my RV to the Fiat to make up the difference and connect to my 6 pin socket.
There were good suggestions in the instructions regarding routing the wiring from the back to the front. However, I couldn’t get the fish tape over the wheel wells or under the splash guard. I ended up jacking up each wheel (driver side rear and then front) then removing the tire the wheel well lining. You have to remove a half dozen fasteners on each wheel well liner and wrestle a bit to get the liners out, but it made routing the wiring over the wheel wells easier for me. I also removed three screws (Philips) under the edge of the drivers side splash guard to loosen the edge of guard which made it simple to run the wire extension between the guard and the frame at that location.
Received today don't have any idea if it works but ordering and delivery were excellent.
Purchased this tow light harness kit specifically for our 2013 Fiat 500 Pop that will be flat-towed behind our RV. The kit arrived just several days after being ordered and contained all the parts required for installation. The install was surprisingly simple due to the 'plug n' play' feature! It took a little over an hour, but we chose to route the wires slightly different than what was suggested on the instruction sheet. We are happy with the results. The Fiat's lights now work as intended for towing and can easily be removed in the future, if necessary.
We purchased our road master towing equipment from etrailer, and then added a this wire harness for our towed vehicle. Every time we purchase from them, they exceed our expectations and ship quickly, and provide excellent videos on their products and installation process. They have now earned the place of being my go to, for all things towing and motor home. Keep up the excellent work team etrailer!
Waiting to install
All and all the harness is very good, it took about three hours to install. Everything plugged together fine, the only
draw back was the wire lead for the car tail lights could have been a couple inches longer. Going to tow car behind a motorhome and the extra lights will help other people see it.
Well constructed base plate. I called Blueox with a question and received great service. So glad that I chose etrailer and BlueOx!
We only installed a portion of the kit, since the wiring was already in place from the front of the vehicle to the rear. Everything worked perfectly. The instructions were easy to follow. I would not hesistate to purchase his product again.
McKenzie was extremely helpful with advise on all my needs for flat towing Fiat 500. I will keep her as my goto person at etrailer.
The installation went well. The 4flat wire needs to be about a foot longer
Has worked perfectly. Only reason for four stars is that it was difficult to install. But once it’s done it’s been fine.
Steven J.
2/10/2021
Still working great. Have had zero problems.
Nice service
George
2/19/2023
Works well
The cord to the front of the vehicle could be about a foot longer other than that I am very pleased with the package.
Plug and play is wonderful. Easy to run wire up to the front.
Good construction of product. Install made easy by good instructions. Happy with the purchase.
Have had no problems at all! It was fairly easy to install and we had zero issues! Thanks for a quality item!
Excellent as expected
fits perfectly, easy install, works gre at.
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Max L.
9/28/2021
Since installation, the wiring to my Fiat 500 tail lights for towing has worked without a problem. I’m pleased.