Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.
Features:
Specs:
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-spices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a ring terminal (sold separately) and the the included self-tapping screw.
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
The included mounting bracket can be installed on your hitch or attached to another bracket (sold separately) that mounts under your bumper with the included hardware. Once you've installed the mounting bracket, take the dust cap off the connector. Slide the connector into the mounting bracket until you feel it click into place. Pop the dust cap back on, and you're good to go.
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.This connector worked fine. No instructions.
Just remember. The standard connection is:
Yellow = left blinker
Green = right blinker
Brown = brake
White = ground
No problem to attach as I had both a schematic for my vehicle ( so I knew which wires to look for) as well as a 6/12v testing light. With these, the connections were easy.
Only used the mount that came with it to secure my existing inline 4 plug, mounts easily
I was surprised and disappointed it did not come with a rubber plug cover to protect new terminals, really happy with it besides that,would have given it 5 stars if it had the cover.
I think the hitch will be ok, but I expected the wiring harness to be better. I was looking for one that was tailored to my 2020 Ford Transit T250 and with instructions.
Katrina B.
4/28/2023
This harness is to be hardwired in. So, you shouldnt have any issues with fit.
Sometimes all you need is a simple bracket to hold a connection, instead of having a cable hang down...and this works perfect. I wanted something basic on my S10 that I could mount underneath to the bumper, next to my receiver hitch, to plug my PWC trailer connection into. I had no need for those large 7-way units (nor the space)...WORKED PERFECT!
Needed a fast any easy replacement for my trailer wiring for my business and etrailer got it to me within a few days will definitely continue doing business with them thanks again!
Seriously amazing product... I spent more time installing my trailer gate on the trailer than I did installing the wiring harness on my vehicle!! The instructions were clear, and installation was FLAWLESS!!!
Perfect. I've never seen a trailer plug like this. It saves me from dragging my old plug on the ground occasionally
Works as described. Easy to follow installation instructions.
Installation was easy and straight forward. It works well.
Nice design, but the wires need to be about a foot or so longer for a Jeep Grand Cherokee.
Good kit. Will install this weekend.
Very quick shipping and items exactly as described.
Thank You!
NO PROBLEMS WORKS GREAT EASY INSTALL
Very easy to hook up and works perfectl y.
They always have what I’m looking for and delivery is always on time.
Item and Service was Great!
Thank you.
I was very happy with everything and would recommend this company to everyone
Install was easy and item performs grea t.
good quality installed very easy.
Products were as listed - great quality and as always fast service!
Nice quality, good price
Easy install, 15min and you're done.
Great, prompt service. Would shop here again.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
7/8/2024
Actually, I had to change this out for a 5-4 wire conversion harness. The 1999 Chrysler town & country only has the left& right turn signal, tail lights and brake lights on separate wires within the vehicle. So I had to buy the converter bix harness that combines the right turn signal and brake lights into the green wire for the trailer lights to operate properly. I never returned the original as it was only $12. I simply picked up the converter unit at a uhaul. Don’t use this harness if your vehicle doesn’t have the right blinker and brakes combined ie. They are located on separate wires.