To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the trim access cover, scuff panels, and tail lights to access these connection points. Once you've plugged in the T-connector, run the hot lead to your car battery, which can be found in the engine compartment. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
Average Customer Rating: 4.7 out of 5 stars (39 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Nice gauge wires. Only issue I had was getting through my firewall in Mazda CX-5. But that is not an issue with this wiring, rather installer challenge. I was going to mount next to my hitch point as on a previous car, but I won't be using it that often I can't run it out of the rear hatch.
Very satisfied.
It’s about as good as I get. Install of hitch required a second person and removing the muffler. I wish they made galvanized hitches which is the main reason for removing a star, already a little rust is showing. That is the way they are.
need to run power wire from 12V supply makes installation very hard,
works great on my mazda cx5. Had installed harness from mazda, never could get it to work. curt t connector was so much simpler to install and works the way it should
Installed a 2” hitch and wiring harness on my new 2023 Mazda CX-5. Install went Great. The self help videos were Awesome, explained everything perfectly. All parts went in with no problem. Product is built really well and it fit perfect. Thank you.
Excellent customer service! Thank you S tacey.
Fairly simple to install. I did some small modification to meet my needs. WATCH THE VIDEO. The written instructions are a bit messy.
I ordered the wrong trailer harness, so I have reordered and am returning the one I received.
Kit was missing a lot of components. Fuse wire connectors no zip ties etc etc. and rear wire assembly was a foot short to reach other light assembly. Not good
Brooke M.
9/15/2023
Oh my, I am so sorry to hear that! I have sent over your information to our customer service team and they will be getting in touch with about this.
The green wire was too short. I had to add more wire to it so it would reach.
It is ok now.
Katrina D.
1/4/2024
If you are needing some additional wiring, you can use part # 16-4B-1.
I installed this kit on a 2023 Mazda cx5. Plugged right into the factory harness in trunk. No splicing needed. Then just run positive to battery with fuse kit provided. Instructions and video are great.
This harness was fantastic. This made a first time hitch install a breeze. The brake harness connectors were perfect and came with everything needed to complete a clean install. Very satisfied with everything I purchased to make this happen.
Very satisfied with your website. Second time ordering from the site. Order was delivered on the date shown when ordered.
Fit perfectly on the CX-50. The most difficult part was running the wire from the rear to the battery terminal. Total time took about 1.5 hrs but I’m excited to be able to haul my ATV around again! Would definitely recommend.
Fit perfectly. The step by step video guide is most helpful and I knew exactly what to expect before I started the job. Thanks for the help
it arrived quickly in good condition
Great product. Worked exactly like des cribed
Easy to install (other than pulling car apart!). Instructions were clear. It took me about 1 hour to disassemble the car, complete all the wiring, and re-assemble the car.
Delivered in the same container as the hitch. Without any problems .
Great customer service along with step by step install videos
It worked and the instructions were good.
Seemed like a bit of overkill and overpriced for what it does.Running a wire to the battery is ridiculous.
Quinn was spot on with my order!!!
easy setup
Quick and easy install. Perfect fit for the Mazda CX-5.
fast delivery.Fit like a glove!
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Shaun
7/21/2024
Excellent