See what our Experts say about this CURT Trailer Hitch Ball Mount

• Trailer Hitch Recommendation for a 2015 Ford Fusion
  Long story short you would need a trailer to transport a heavy duty power scooter with a 2015 Ford Fusion. The highest rated hitch we offer for your vehicle is the Curt part # C12091 that has a 350 lb tongue weight rating which doesn't sound like it would be enough when you consider the weight of the carrier as well. This hitch would work well to tow a light trailer with though. For a ball mount you would want the part # C45016, hitch ball # 19256 for 1-7/8 inch and part # 19258 for 2...
  view full answer...
• Best Trailer Hitch for a 2004 Volvo XC70
  I do have a trailer hitch receiver that will fit your 2004 Volvo XC70 but it has a 1-1/4" receiver tube opening, not a 2" receiver tube opening. They do not make one with such for your Volvo and the Curt Trailer Hitch Receiver part # 13559 that you referenced will not fit. The correct trailer hitch I recommend for you is the Curt Trailer Hitch Receiver part # C12318 which as previously mentioned has a 1-1/4" receiver tube opening. The 1-1/4" receiver tube opening however can still do mostly...
  view full answer...
  
• Ball Mount and Roof Rack for 2015 Ford Escape
  Let's start with the ball mount; since your Escape has a towing package and a hitch, you should start with a ball mount. You mentioned a Class II hitch so I am assuming your receiver is 1-1/4". As for the correct rise or drop, since your camper company specified 16 inches to the top of the ball you'll only need to measure from the ground to the top of your hitch receiver and find the difference between the two measurements. If the height of your hitch is greater, you will need a ball...
  view full answer...
  
• Trailer Hitch Recommendation for 2006 Volvo XC70
  The Curt hitch for your 2006 Volvo XC70 # C12318 is what i would recommend for you as it has the higher weight capacities and is made in the USA. Then for trailer wiring the part # C56236 will be your best option. With Class I hitches like this you have to use the required ball mount that the manufacturer specifies. So for the Curt hitch you'd need the # C45016 which has a 2-5/8 inch rise or 3-1/4 inch drop. If your trailer needs a 2 inch hitch ball you'd want the part # A-82 or for a...
  view full answer...
• Recommended Trailer Hitch, Wiring Harness and Ball Mount for 2004 Volvo XC70
  There are options to install a trailer hitch on your 2004 Volvo XC70 but the only fits for this vehicle are Class II hitches with a 1-1/4 inch receiver and they do not allow weight distribution to be used; I checked with the hitch manufacturers to make sure. Among these hitches for your Volvo I recommend the Curt Trailer Hitch # C12318 durable steel construction, easy bolt-on installation and the fact is made in the USA. The accompanying photo is one a customer sent in of this hitch installed...
  view full answer...
  
• Can I Tow A Small Trailer With Curt Hitch On 2017 Mazda 6
  Yes, the Curt Class I receiver part # C11356 is rated for up to 200 lbs of tongue weight so it supports the weight of your small trailer and gear. Tongue weight is normally 10-15% of the loaded trailer weight and it sounds like your tongue weight could be around 60 lbs at the max. As long as you do not exceed the 200 lb tongue weight capacity the Curt can support it. However, I was able to find your owner's manual as well and it lists many different configurations that depends on how...
  view full answer...
• Recommended Ball Mount for a 2006 Toyota Sienna Ball With a Class II Trailer Hitch
  The recommended ball mount for your 2006 Toyota Sienna would have a 2-5/8 inch rise, like Curt ball mount # C45016. This would put the hitch ball at the most common trailer height, but to ensure it will work with your particular setup, I would recommend taking a couple simple measurements. First, measure from the ground to the top of your class II hitch opening. Then, with your trailer level, measure from the ground to the flat bottom of the trailer coupler. The difference between these...
  view full answer...
• Trailer Hitch Fit for 2015 Ford Fusion Energi
  Officially we have to recommend that you always stay with the recommendation of the manufacturer on towing as they are who the warranty of the vehicle is with and they are who would have tested the vehicle for towing. That being said we realize that a lot of people ignore their owners manual and tow with vehicles that aren't designed for it and allegedly do not have any problems. So our hitch manufacturers make hitches for these vehicles as there is a demand for them but it's a situation...
  view full answer...
• What is the Recommended Ball Mount for a 2005 Toyota Sienna with a 1-1/4 Inch Trailer Hitch
  For a Class I or II trailer hitch with a 1-1/4 inch trailer hitch, you must use the ball mount that is recommended by the trailer hitch manufacturer. The reason is that the hitch has been tested with a specific ball mount and it is deemed to be the safest and best option for that vehicle and hitch combination. The only 1-1/4 inch hitch we carry for your 2005 Toyota Sienna is # C12065. The correct ball mount for this hitch is # C45016, and it must be used in the rise position only. It has...
  view full answer...
• Trailer Wiring Harness For 2016 Volkswagen Golf R
  The correct trailer wiring harness for your 2016 Volkswagen Golf R is a hardwire kit from Curt, which is the following part number: - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 Since you're going to be doing some towing with your '16 VW Golf R, if you also need a hitch and ball mount, the correct fits are the following: - Curt Trailer Hitch Receiver # C11564 - Curt Class II Drawbar # C45016 - 1-7/8" Hitch Ball # C40001 or 2" Hitch Ball # C40018 - Pin...
  view full answer...
• Hitch and Wiring for 2009 Mazda 3 Hatchback Grand Touring
  We can help you get your 2009 Mazda 3 Grand Touring Edition ready for your utility trailer. Curt Class I hitch # C11386 is a good choice along with ball mount # C45016. You will also need a hitch ball, either 2-inch ball # A-82 or 1-7/8-inch ball # A-80. Just check the coupler on the trailer; it will be stamped or have a sticker to indicate the ball size required. This hitch has a 2000-lb trailer weight rating, meaning that the loaded trailer and its contents must remain within that limit....
  view full answer...
  
• Recommended Trailer Hitch Receiver And Towing Accessories For 2013 Ford Fusion For Towing Jet Ski
  For your 2013 Ford Fusion, I recommend the Curt Class II trailer hitch receiver # C12091. This hitch is compatible with the S and SE models as well as the Titanium model. For a ball mount, I recommend the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs # C45016 along with a hitch ball to match your trailer coupler. For a 2 inch ball, I recommend # A-82 and for a 1-7/8 inch ball # A-80. You will also need a pin and clip like # F-4, or a locking pin like the...
  view full answer...
• Trailer Hitch Recommendation for 2007 Volvo XC70 for Towing Jet Ski Trailer
  A Jet Ski trailer would not put a tongue weight of 500 lbs on the trailer hitch. We have a Curt hitch part # C12318 which is a confirmed fit for your 2007 Volvo XC70 which has a tongue weight capacity of 350 lbs which would be more than enough for a Jet Ski trailer. For trailer wiring you'd want # C59496, then for a ball mount you'd want part # C45016, hitch ball # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch ball.
  view full answer...
• Hitch Recommendation for a 2015 Volkswagen Golf
  For a hitch for your 2015 Volkswagen Golf you would want the Curt Hitch part # C11000. For a ball mount you may also be interested in the part # C45016, for a 1-7/8 inch hitch ball part # 19256, for a 2 inch ball part # 19258.
  view full answer...
• Recommended Hitch, Wiring, and Ball Mount for a 2022 Honda CR-V
  Hey John, good news, we got everything you're looking for! So for a hitch, I'd suggest going with the Curt Trailer Hitch Receiver # C12169 which has a nice 3,500 lb capacity, for a wiring harness I'd recommend going with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56370 which is a custom fit wiring harness, and finally for a ball mount with 2" hitch ball I recommend going with the Curt Class II Drawbar # C45016 & # 19258. What are you planning on...
  view full answer...
• Ball Mount For My Class 2 1-1/4 Inch Hitch
  The Curt Class II Drawbar # C45016 will move the hitch ball away from your plastic bumper. Using this drawbar will move the hitch out 9-3/8 inches which is center of hitch pin hole to center of hitch pin hole. The ball mount has a sturdy steel construction which has a black gloss powder coat finish. The ball mount has a gross towing weight up to 3,500 pounds and a tongue weight up to 350 pounds. I attached a review video link below.
  view full answer...
• Trailer HItch and Wiring for a 2015 Volkswagen Golf
  We do have one trailer hitch for the 2015 Volkswagen Golf. It is Curt hitch # C11412. It will not fit the R models. If you plan on doing some towing consult the owners manual to make sure you can. The proper ball mount for this hitch and vehicle is # C45016. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # 118646. If you want to use the hitch for a bike rack or cargo carrier make sure the accessory is rated for use with a Class I hitch....
  view full answer...
• Recommended Trailer Hitch And Ball Mount for 2015 Ford Fusion Hybrid
  I spoke with my contacts at our suppliers about your 2015 Ford Fusion Hybrid and a trailer hitch. They told me there is no difference when installing a trailer hitch and the fit should be just fine. I recommend the Curt Trailer Hitch, part # C12091. This is a Class ll hitch and has a 1-1/4 inch receiver opening. I have attached a link to an installation video you can check out. For a ball mount I recommend part # C45016. This ball mount has a 2-5/8 inch rise or 3-1/4 inch drop and measures...
  view full answer...
• Recommended Curt Class I Trailer Hitch Receiver for 2005 Honda Accord
  You are correct in how the Curt Trailer Hitch Receiver -Class I - 1-1/4" # C11290 is mounted. This hitch has been tested to hold a maximum tongue weight of 200 lbs and a maximum trailer towing weight of 2,000 lbs when loaded. A riding lawn mower on a small trailer is probably at close to the maximum capacity of this hitch, so I recommend calculating the weights before doing this as your owners manual states 1000 lbs towing max and 100 lbs tongue weight. For your trailer wiring, I recommend...
  view full answer...
• Will Curt Trailer Hitch 12091 Fit a 2014 Ford Fusion Sport SE
  I checked with Curt and trailer hitch # C12091 fits all models of the 2014 Ford Fusion including your SE Sport model. I have included a link to the installation instructions for you to view. There are some underbody panels that do need to be permanently removed for hitch installation. If you plan on doing any towing be sure to first check the vehicle owners manual for the capacities of the vehicle and if lower than the hitch capacities go by the lower rating. For a ball mount use # C45016...
  view full answer...
• Trailer Hitch Receiver Fit for 2004 Volvo XC70
  We do have a fit for a trailer hitch receiver for your 2004 Volvo XC70, but the Curt Trailer Hitch Receiver - Multi Fit # C13900 will not fit your vehicle. It seems likely you wanted that hitch because it is a 2' receiver, but unfortunately there aren't any hitches with a 2" receiver that fit your 2004 XC70, so you'll need one with a 1-1/4" receiver, the Curt Trailer Hitch Receiver # C12318. If you are going to be towing with this vehicle you'll need a couple more things, the Vehicle...
  view full answer...
• Best Hitch Recommendation for a 2015 Lincoln MKZ
  The Curt Hitch part # C12091 that you referenced has been confirmed to fit your 2015 Lincoln MKZ so I would recommend it for you. Check out the install video I attached. For a ball mount you would want part # C45016, 1-7/8 inch ball # 19256, 2 inch ball # 19258.
  view full answer...
• What is the Height With and Without Rise on Ball Mount for 2016 Ford Fusion
  For your 2016 Ford Fusion, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12091 is a confirmed fit. This hitch will be 10-3/4 inches from the ground to the inside top of the receiver opening. When using a ball mount like # C45016, this will give you a 2-5/8 inch rise from that location giving you 13-5/8 inches from the ground in that rise position. In the drop position, the top of the mount or bottom of the actual hitch ball will be at 7-3/8 inches from the ground....
  view full answer...
• 2013 Ford Fusion Trailer Hitch and Wiring Recommendation
  We have trailer hitches that would have enough towing capacity to tow your 550 lb motorcycle as long as you have a lightweight trailer. The Curt hitch part # C12091 is a fit for your 2013 Ford Fusion and it has a 3,500 lb trailer weight capacity. You would need to verify your towing capacity by checking the owners manual as well. You will also need a ball mount like # 3594. Two common trailer ball sizes that will fit this ball mount are the 2 inch # 19258 and the 1-7/8 inch # 19256;...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?