bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 500 lbs
  4. Fits 2 Inch Hitch
  5. WD Only
  6. Includes Shank
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
CURT

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW

Part Number: C17050
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$363.11
Retail:$501.95
You Save: $138.84
Weight Distribution Hitch
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately. Great Prices for the best weight distribution hitch from CURT. Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW part number C17050 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (770)
  • Q & A (0)
  • Photos

CURT Weight Distribution Hitch - C17050

  • 500 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • CURT
  • Includes Shank
  • No Sway
  • Electric Brake Compatible
  • Surge Brake Compatible

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Round spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Grease zerks in the head assembly make for simple maintenance
  • Powder coated steel resists corrosion
  • Snap-up lever eases hookup by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 500 lbs - 600 lbs
  • Maximum gross towing weight: 6,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Lift bracket positioning: 31-3/16" back from center of coupler
  • Shank length: 12"
  • Maximum rise: 6"
  • Maximum drop: 2-1/2"
  • 1-Year limited warranty


Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Lift Bar
  • Hitch Pin and Clip
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Forged Steel Spring Bars

The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.


Built-In Grease Zerks

Built-in grease zerk on the Curt weight distribution system head assembly

The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.



17050 Curt MV Round Bar Weight Distribution Hitch

Installation Details C17050 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW - C17050

Average Customer Rating:  4.6 out of 5 stars   (770 Customer Reviews)

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.

by:

I wouldnt tow without having weight distribution, sway control and brake controller. Curt makes great products and E trailer has the best customer service



by:

I'm giving this hitch a 5 star based not only on the hitch but my overall experiences with Etrailer. I have owned this hitch for a year.There are better weight distribution hitches out there, but I must say it's a great hitch for the money. It was fairly easy to install on my own and the set up is straight forward. I did not get the sway control, but you can easily add it to this hitch. Engaging the bars can be difficult if you're not on perfectly level ground.



by:

Best weight distribution system I have ever used. Very strong and made towing a pleasure.



by:

Amy the Etrailer rep was outstanding & very helpful!

Donald profile picture

Donald

4/8/2024

Works as advertised, no problems. Good product.



by:

Arrived early, my wife and I installed this ourselves with basic tools. Instructions were clear and easily followed. Loaded my trailer just like I would for travel. Went from squatting to nice and level.
I purchased longer chains for the bars due to the Somerset having a stacked frame.
I also purchased a transmission cooler. Installed that with no problems



by:

Product itself seems very stoutly built. It can't be easily installed if your trailer jack wheel is on the side of the a-frame, like mine is. The offset bracket kit doesn't help at all in this case. I had to move my jack wheel farther aft to make it work.

The packaging is just way to flimsy for the 81 lb. weight. It came crushed with holes and stuff hanging out. I've seen several other reviews with this same complaint. Fortunately, nothing was lost.

Lynn A. profile picture

Lynn A.

7/27/2023

Still working well. My complaints were all about shipping and installation issues see original review.



by:

I received this item today. It is incomplete!!
The
inside box had to be torn to shit before the out side box was put around it,. REALLY! Someone should have at least checked to make sure all of the parts and readable instructions were present.
At this point my review rationg would be .5. Just glad I wasnt ready to go on a trip.
All items on parts list 7 thru 19 are mising.

Sierra K. profile picture
Etrailer Expert

Sierra K.

6/30/2022

I am sorry. I know that was irritating. We recently shipped you new hardware and were wondering if you had any comments about the installation of the product?



by:

Put this on our 2006 Nissan Frontier to pull our camper. Worked great, and really helped raise the trailer tongue.



by:

Iam sure the hitch will work well if all the parts are there. This is how I received my hitch off the delivery truck. Not good.

Katrina B. profile picture
Etrailer Expert

Katrina B.

5/16/2022

Oh no! I have sent your information over to our customer service department for them to assist you.



by:

I have been a shadtree machanic all my life, and I recognize quality when I see it. This well made Curt is the confidence builder I needed to feel safe towing heavy loads with a Toyota Tacoma.



by:

This hitch system has been great for our camper and 2018 Kia Sorento. The only complaint I have is that the finish coat started to peel and have issues in some spots pretty quickly. It did not take much for there to be a ding or nick that caused issues which then produces some rust.

As far as utility though, the hitch works great and meets the need of what I am looking for.



by:

This is my second Curt system and the quality isn’t as good as the first. The loading bar for the snap up bracket is a rough cut, short piece of pipe, without a handle grip. The hinges on the snap bar bind and do not move freely by hand. The chain links were smaller making it hard to keep them on the hook when loading the spring. I took the chains from my old system and put them on the new system. The paint finish is not as durable as the old system. The holes for the safety pins are not exactly aligned. The system works but I was hoping for better quality.



by:

The hitch was easy to install and setup properly with the instructions provided. My pickup and the trailer ride level and I’m guaranteed to not drag the tongue jack again.

Mac profile picture

Mac

5/31/2020

Still great, I’ve used it with my old Dodge Dakota and my newer Toyota Tacoma. I had to make a simple adjustment when I first started towing with the Tacoma but it is all good after the slight adjustment.



by:

Good fit and finish of the weight distribution system. Assembled and installed easily in 1 to 2 hours. Seems to be the perfect fit for my trailer and tow vehicle. Way better value than the $900 system that the RV dealer tried to insist that I needed.

Jerome profile picture

Jerome

6/11/2019

still working great. no issues.



by:

This hitch seems very well made and is not difficult to assemble. I’m overall happy with this product except for the chains on the bars isn’t long enough to hook up while using this with a pole tongue adapter.

Mike L. profile picture
Etrailer Expert

Mike L.

5/11/2018

The Pole tongue adapter you purchased is designed for trailer frames up to 6 inches tall. If the chains arent long enough, lower the weight distribution head by 1-2 sets of holes and tilt the head more toward the front of the vehicle. This will bring the ends of the spring bars higher, and should allow your existing chains to work.



by:

So far I have installed the Weight Distribution Hitch, very easy to install it (saved me 200 $), easier if you have a helper, took me about an hour (with a helper) to put it together, instructions very easy to follow.
Solid construction, you will need tools that usually are not in every house (1" wrench)



by:

I had the system installed by my trailer personnel--no problems. Fit was perfect and it works great. Highly recommend it.

Thomas profile picture

Thomas

8/12/2022

I sold the trailer and the system.



by:

This hitch system helped us haul our popup 4k highway miles with no stability issues and great load levelling on our Honda minivan. Setup is relatively easy, however it did require some modifications to the trailer tongue. Overall I recommend this device.



by:

A big improvement in towing performance for my small truck and small travel trailer. Even without a sway control device, the sway is drastically reduced. Great value for the price.



by:

Exactly what i needed good instructions. Package was destroyed and the little bag holdins the hardware had busted open , and the shipper did get everything back in the box before tapping everything up. etrailer was right on it and got the missing parts to me asap thank you for that



by:

Using hitch to pull a 20’ 3k travel trailer. Works great, easy to set up and hook up. Usually takes 10min to be full ready to pull my trailer.



by:

Works well on my f 150 and wolf pup tra iler



by:

Equalizer bars work great with my Dodge Caravan and our Christian Builders tool trailer.



by:

I installed the hitch today, with the information provided on the etrailer website I was able to get the right one for my application first time around. It turned out just like I wanted. etrailer has name brand products at good prices. I'll be back.



by:

Great product for my needs, etrailer was quick to get my order shipped.
Here's where things take an ugly turn. UPS scattered the parts across 7 or 8 states - but etrailer took care of me. They were pleasant to deal with and took care to get me a replacement promptly.


25
769
Show More Reviews

See what our Experts say about this CURT Weight Distribution Hitch

  • Is Curt MV Weight Distribution Hitch Good For 5000 lb GVWR Trailer
    Hey Lucas, The Curt MV # C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of. Your tongue weight is going to be in the range of 650 lbs, so instead I'd go with the Fastway e2 Weight Distribution # FA94-00-0800. This is for 400 lbs - 800 lbs tongue weights so it'll be perfect for your set up. The Fastway also includes sway control,...
    view full answer...
  • Weight Distribution System For A 2020 Kia Telluride Towing a 5,000 lb Trailer
    Hello Pete. It sounds like you are on the right track here, because the Curt MV Weight Distribution System # C17050 will definitely be a correct match for your 2020 Kia Telluride and your 5,000 lb trailer. Generally, we look more at the trailer side of things when selecting a weight distribution system. More specifically the loaded tongue weight of the trailer. The Curt # C17050 is recommended for trailers with a tongue weight between 400 and 600 lbs. It sounds like you will be within that...
    view full answer...
  • Weight Distribution System for a 2011 Rpod 172T Trailer
    I would be happy to help you find a weight distribution system for your 2020 Toyota Sienna. Both the Curt systems you referenced item # C17050 and item # C17499 are way over capacity for your 2011 Rpod 172t and will cause you to have a stiff and rigid ride. Your trailer has a maximum capacity of almost 3,200 lbs which will put you just under 500 lbs on your maximum tongue weight. I recommend the Blue Ox TrackPro Weight Distribution w/ Sway Control item # BLU36FR. This system has a tongue...
    view full answer...
  • Solution On How You Can Install A WDS On Trailer With No Space On Trailer Frame
    To be able to properly install the Curt MV Weight Distribution System # C17050 on your Flagstaff 176ED with limited frame space, I recommend installing the: -Chain Hangers for Reese Weight Distribution Systems # RP58305. These brackets provide alternate attachment points for your WDS, and is specifically designed to eliminate any clearance problems by attaching to the side of the trailer tongue instead of the top. I have also included an installation video of # RP58305 for you to check...
    view full answer...
  • Weight Distribution for Supertruss Extenssion and Boat Trailer With 450 lb Tongue Weight
    When using the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 60" Long # TLE1560 it is a good idea to use a weight distribution system because this will increase the tongue weight capacity of the extension from 500 lbs to 1,000 lbs if you have a SuperHitch Original or Magnum, and a weight distribution system will transfer the weight from the extension. In order to choose the best weight distribution system you will first need to know your total tongue weight...
    view full answer...
  • Weight Distribution Recommendation for 600 lb for Combined Trailer Tongue and Rear Tow Vehicle Cargo
    Thank you for the information! If your loaded trailer tongue weight (which should be 320 lbs - 480 lbs) plus the weight of cargo in the back of your 2000 Chevy Tahoe is about 600 lbs then the Curt MV Weight Distribution System # C17050 is going to be right in your wheelhouse. None of our weight distribution systems mount 36" back from the center of the hitch ball so you will need to use the Curt Hanger Kit # C17005 to accomplish this. It's also important to note that you'll need a hitch...
    view full answer...
  • Determining Correct Weight Distribution Hitch For Towing W/ 2005 Toyota Sequoia
    The Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 you were looking at very well may work with your 2005 Toyota Sequoia, but to confirm this you will need to verify the total tongue weight of your setup. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your vehicle. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like...
    view full answer...
  • Where on Trailer A-Frame Would Lift Brackets of Curt C15070 MV Weight Distribution Hitch Install
    When installed so that the chains are perpendicular to the trailer frame, the lift brackets should be installed so they're centered right at 30 inches rearward from the trailer ball when the trailer's hitched up. The lift brackets are 4 inches wide (they take up 4 inches of space on the trailer A-frame), so the leading edge of the bracket would sit at about 28 inches rearward of the ball center and the trailing edge of the bracket would sit at about 32 inches rearward of the trailer ball...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution System for a 4,700 lbs Trailer
    Weight distribution systems are chosen based off of tongue weight, which is typically 10% - 15% of your trailer's total weight. Your 4,700 lbs trailer would have a tongue weight range of 470 lbs - 705 lbs. With this in mind, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA94-00-0800. This system has a tongue weight range of 400 lbs - 800 lbs which would great with your trailer. The Fastway e2 item # FA94-00-0800 has built in sway control that will keep...
    view full answer...
  • Can You Reverse with the 6K Curt MV Weight Distribution System
    The Curt MV Weight Distribution System part # C17050 does not have sway control so reversing is not as big of an issue although the trailer still needs to remain relative straight. If you need to turn and backup it is recommend to unhook the spring bars.
    view full answer...
  • Does the Curt MV Weight Distribution System Require Drilling
    The Curt MV Weight Distribution System part # C17050 offers bolt-on installation therefore you won't have to drill into your trailer frame. The frame hanger brackets which are the only part of the system that installs on the trailer are held in place by set screws which just butt up against the frame and do not protrude though. The 500 - 600 lb weight capacity will be perfect for your trailer. The only other thing you will need to complete this setup is a hitch ball, the 2" Hitch Ball...
    view full answer...
  • Can the Curt MV 600 LB Weight Distribution System Be Upgraded
    The springs bars are the only difference between the Curt MV Weight Distribution Systems part # C17050 and part # C17051 and these are available separately so you can purchase two of the Replacement Spring Bar part # C17072 and then be set when you are towing with your motorcycle in the truck bed. The addition of airbags should not be needed. In regards to installation, the head attachment bolts used to be 1/2" but they are now 3/4" and that is what this is referring to so please disregard...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution Hitch For Trailer W/ 440lbs TW, and Trailer W/550lbs TW
    I would be happy to help! First the Curt MV Weight Distribution Hitch # C17050 you were looking at would be a bit stiff with the 440lb tongue weight you mentioned for your 16' Airstream, but is that figure what Airstream lists as the tongue weight, or what you measured? I would use a tongue weight scale to measure the tongue weight of both of your trailers when they are fully loaded if you have not already, as the tongue weight figures manufacturers provide are typically the unloaded...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution System for a 4,000 Lb Trailer
    I have two options for you; a system without sway control in the Curt MV Weight Distribution System part # C17050 and a system with sway control in the Husky Center Line Weight Distribution System part # HT32216. These systems are both rated correctly for your 4,000 lbs trailer. I recommend the system with sway control as you will have stability during strong crosswinds or when large trucks pass by. It also comes with a 2-5/16" hitch ball which is what you need as I am not aware of a 2-5/8"...
    view full answer...
  • Recommended Weight Distribution Hitch For Trailer With Short A-Frame
    Based on the picture you provided it does look like the tongue is pretty short and may not work with the Fastway e2 Weight Distribution Hitch # FA92-00-0600. If you measure back 27-30" from the center of the coupler and do not have room you will need to go with a different style of hitch. I recommend the Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 with bolt on brackets # C17005. The bolt on brackets are great because they mount on the side of the...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution for 5000 lb GVWR Toy Hauler
    From the numbers you provided, your fully loaded trailer tongue weight should range between 500 and 800 lbs. I'll link to an article that describes a couple of ways to definitively determine this, but the easiest way is to use a tongue weight scale like the etrailer, part # e99044. Given the likely range of your trailer's tongue weight, the Curt TruTrack, part # C17499 which is effective on trailers with 500-800 lbs of tongue weight would be ideal. The TruTrack provides proven weight...
    view full answer...
  • Bolt Size of Replacement Bolt Kit for Curt MV Weight Distribution Systems
    Sure thing - the Replacement Bolt Kit for Curt MV Weight Distribution Systems # C17076 uses 3/4" - 10 x 4 1/2" long hex bolts. According to the linked instructions, they will be tightened to 200 ft lbs. This replacement bolt kit is used to attach the head to the shank. Here are the systems that the Replacement Bolt Kit # C17076 works with: - Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW # C17050 - Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW,...
    view full answer...
  • Replacing OEM Hitch On 2011 GMC Sierra 1500 - Class IV
    The factory hitch that came with your GMC Sierra 1500 was at least a Class III and possibly a class IV depending on what trim level you have. Looking at the available products as well as your specific application and towing needs, I recommend replacing your OEM hitch with the Curt Class IV Hitch # 14301 which has the 1000 lbs TW and 10000 lbs GTW you're looking for. I would caution you to give more consideration to a weight distribution hitch instead of a pure bumper pull, based upon your...
    view full answer...
  • Sway Control Help for a 19 Foot Travel Trailer
    If I am understanding your question correctly it sounds like you are using the Curt Friction Sway Control for Weight Distribution Systems item # 17200 when you are pulling your 19 ft travel trailer with your 2020 Ford F-150. To keep your trailer from bouncing up and down and give you a more solid stable connection I recommend adding a weight distribution system that is compatible with your Curt Friction Sway Control. The Curt MV Weight Distribution System item # C17051 would work extremely...
    view full answer...
  • Where Do Frame Brackets Install on Frame with Curt Weight Distribution System C17050
    When the Curt weight distribution # C17050 is installed so that the chains are perpendicular to the trailer frame, the lift brackets should be installed so they're centered right at 30 inches rearward from the trailer ball when the trailer's hitched up. The lift brackets are 4 inches wide (they take up 4 inches of space on the trailer A-frame), so the leading edge of the bracket would sit at about 28 inches rearward of the ball center and the trailing edge of the bracket would sit at about...
    view full answer...
  • Weight Distribution System Capable Of A Weight Capacity Of 6,000lbs And A Tongue Weight Of 600lbs
    Assuming you're talking about the length of your shank being 16" long, then no the length of your shank will not affect the capacity of your weight distribution system. That being said, if you're looking for a complete system I recommend going with the Curt MV Weight Distribution System # C17050. This weight distribution system has a maximum tongue weight capacity of up to 600lbs, with a maximum towing weight capacity of 6,000lbs, like you mention and they are round bars as well. This...
    view full answer...
  • Recommended Weight Distribution for 3700 lb Fleetwood Niagara Pop-Up Camper
    With a weight distribution system, you want to choose a system based on the fully loaded and ready to tow tongue weight of the trailer. I'll link you to a help article that explains how to determine your fully loaded tongue weight, but since you've provided the GVWR (thanks for that, by the way!) we can make a pretty darn accurate educated guess. With a GVWR of 3700 lbs, the tongue weight of your pop-up will range from 370 lbs on the low side to as much as 550 lbs. Both the Curt # C17057...
    view full answer...
  • Does Curt MV Weight Distribution System C17050 Work Over a Range of Trailer Tongue Weight
    Weight distribution systems like the Curt MV Weight Distribution System # C17050 are specified to work over a range of trailer tongue weights (TW). This system is rated for TW from 500 to 600-lbs. Ideally the total TW of the trailer/vehicle system will fall right near the middle of a WD system's operating range. This Curt system would then be ideal for a total TW of 550-575-lbs. The total TW of a trailer/vehicle system is the sum of the actual fully-loaded trailer's TW plus the weight...
    view full answer...
  • Recommended Weight Distribution System for Travel Trailer With 500 Lb Tongue Weight
    The Curt # C17050 weight distribution system you'd looked at would work fine for the approximately 500 lb tongue weight of your trailer, but because travel trailers can be very vulnerable to trailer sway caused by cross winds and turbulence caused by passing traffic, I'd highly recommend going with a weight distribution system that provides an integrated sway control component for a safer and more comfortable towing experience. I'd recommend the Fastway e2, part # FA92-00-0800 which is...
    view full answer...


< Previous



Do you have a question about this Weight Distribution Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B
Employee Chelsea B
Written by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.