To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.6 out of 5 stars (101 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.So far, just received the item. I’m furious, not sure who’s to blame but the box was completely torn and all the hardware missing. My trucks at the shop and theirs nothing that can be done at the moment other then hold up the bay until I get the hardware.
Hitch works great but install was not good as I had use old hardware because the new hardware wouldn't work for the excursion.
Perfect fit on a 7.3 diesel 4x4 Excursion. The large eyes for safety chain hooks are great. Looks better than OEM. The factory trailer plug mounted perfectly too. If your Excursion still has the original receiver it might look good from behind the truck, but it probably looks like Swiss cheese from underneath
You will have to at least drop the rear of the fuel tank down to install this. If your fuel filler neck is original, now is a good time to replace it.
I made it work but was expecting better quality from made in the USA! Most of the welds over all are just "ok" and some are poor. The 2 sides were not parallel (1"off front to back) so I had to use clamps to push/pull it into place. My factory hitch was not rusted out like many others but just warn out due to towing. I didnt weigh the hitches but I think I the factory hitch was still heavier.
Sierra K.
5/26/2022
This flex, as shown in your photo, is typical as the hitch is made with mild steel to flex with the vehicle over potholes and heavy terrain. You did a good job bending the hitch back. Here are some other tips about flex:
Helpful Links
Installation was a little trickier than the instruction indicated, but I installed it on a 20 year old Excursion. Still, it fit right and works as it should. New piece of mind not having a rusted receiver on my work horse.
Etrailer has great customer support shipping was fast. Curt manufactured a great hitch direct replacement. Removal and install took around 5 hours with the truck on a lift. I did not have to take the tank out but had to loosen all the tank bolts and support with a stand. Cut a notch out of the old hitch for access to the shear bolt. Pipe wrench and a four foot cheater pipe to remove shear bolt. All the rest was a breeze.
I am very please with the Curt Class IV hitch I purchased for my 2002 Ford Excursion 7.3L diesel. The quality of the steel, welding, and power coat finish looked good enough to part of the car body not as an extension of the frame.
A local installer dropped the fuel tank and did the complete installation. Looks great. Looking forward to pulling my new Jayco trailer when it comes in August.
I was very pleased with etrailer's quick turn around in filling and shipping the order. I have and will purchase other trailer items from etrailer.com!!!
Working well.
Had no issues with installation. I sprayed down the mounting bolts twice day for a week before I started the job. Dropped the fuel tank and was able to back the bolts right out. Install of the hitch was easy. I was able to remove the old electrical connector for the lights and reinstall it on the new hitch.
Perfect fit and simple to install
This is a one-year review. Arrived in good shape from etrailer.com. The box was in poor shape, but the hitch itself was pristine. It was installed by a shop and I had them replace all the hardware with heavy duty bolts, nuts and washers. After it's first year, there is some rust developing in the receiver box that I'll need to take care of. We live in Pennsylvania with road salt, but it was a mild winter and I feel the hitch shouldn't be rusting yet. All in all, good replacement for factory hitch.
Timothy J.
3/30/2021
After two years, the hitch only has marginal additional rust, although the vehicle was driven fewer winter miles during this past year. Still a solid purchase.
Installed this on my 2002 Excursion by myself in my driveway. The fuel tank has to be dropped which was not a big deal and a great time to replace the aged fuel pump. Purchased as the original hitch was badly rusted and not trustworthy. I am impressed with build quality and ease of install. I would recommend to anyone in need of replacing their factory hitch. Purchased with the intentions of pulling a 10k travel trailer around the east coast.
Joel
3/10/2020
Loving it. Have used this extensively. Was worried about rusting as I use a few different ball sizes and remove the pin and hitch often. No rust has shown up and the finish is holding up amazing. Still black and not faded at all from UV exposure. Very happy with this hitch
The hitch was a snap to install, and exactly what my 2000 excursion needed!!
Shipping was super quick. The packaging was destroyed, but the item was not damaged.
Exact replacement for my old rust unit and couldn’t beat the price
Don't pass this website up! This is my second hitch purchased from etrailer and I'm extremely happy with both. Shipping is very fast, installation is a breeze and I've had the latest one hooked up on my ford excursion that pulls an 8k travel trailer. We live in the Salt belt and it is holding up really well through the elements. Will definately be returning here if I ever need another hitch, thanks guys!
Perfect fit for a 2002 Ford Excursion. As had been highlighted in the e trailer information- the fuel tank/ shield had to be lowered to get access to the bolts and shear bolt. Very pleased with how it fits and looks. The original receiver hitch actually fell apart (due to rotting) as one side was being unbolted. etrailer had an excellent price, free shipping. The receiver hitch had no scratches or abrasion on the painted surfaces- nicely packed by etrailer with the rest of my shipment.
All hardware included, fit perfectly!!
I’ve had this hitch for a year now, and I’m generally pleased with it. There were some issues with the original installation as the early Excursion used different hardware to install the hitch. A phone call to George resulted in the correct hardware being sent allowing proper installation. George responded quickly to my problem and resolved it to my satisfaction. My only complaint with the receiver is that the receiver tube seems a little oversized allowing the receiver to float in the hitch.
I recondition and rebuild Ford vehicles and these hitch assemblies are great with basically an imitated factory look and design. Seller shipped fast too!!
Perfect fit, but none of the hardware is useable as it was the wrong size. No need for the fish wire as I was able to remove the shear bolts using an easy out, after I drilled the heads off
Jenny N.
7/14/2022
You mentioned that the hardware was wrong and did not fit. I wanted to ask you what size hardware did you receive? Did it match the hardware listed in the manual? Did you clean out the bolt holes with a wire brush?
Helpful Links
Jaime was great to work with on the phone. Was told product would be here Friday. Showed up Thursday. Great customer service!
This hitch for a Ford Excursion was the only one available anywhere. It arrived promptly in undamaged condition, was beautifully built, and fit precisely. Highly recommended.
Great product. The only thing That could make it better is a bracket or accommodation for the round 7 point plug. I bought a bracket and it had to be mounted on bottom side of receiver. I backed into a stall and the curb broke the hanger. Has to be a better way.
im giving this product 3 stars only because there were several minor scratches on the hitch when i took it out of the box. there was no packing or wrap on the hitch or inside the box which was likely the cause of the scratches. there were only maybe 3 or 4 areas but we all know how easily trailer hitches rust and having any exposed metal areas or scratches would easily welcome a rust spot. the unit iteslf is well built, looks very solid. i have not installed it yet due to the fact that i want to have it painted or something and address the bare metal spots. i do not want to see rust on this in 3 months.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/17/2024
I apologize that the hitch arrived this way. We will be in contact with you and have any missing hardware sent out as quickly as possible to you.