See what our Experts say about this CURT RV and Camper Hitch

• Recommended Hitch for a 2021 Grand Design Momentum 25G Toy Hauler
  To add a hitch to your 2021 Grand Design Momentum 25G toy hauler you are going to want the Adjustable Width Trailer Hitch Receiver item # C13702. This frame mounted hitch can be bolted or welded on and will fit as long as your frame isn't wider than 51". This is a class III hitch with a 2" receiver and is a universal fit. There are no custom fit hitches for your trailer. You will want to verify what your toy hauler's capacity is but this hitch can provide you with a 500 lbs tongue weight...
  view full answer...
• Recommended 2 Inch Trailer Hitch Receiver for a 2018 Jay Flight SLX 184BS
  Yes, in order to carry a bike rack or cargo carrier on the rear of your 2018 Jay Flight SLX 184BS I highly recommend the Adjustable Width Trailer Hitch Receiver part # C13702 which is specifically designed for trailers and RV's and will give you a 2" receiver tube opening. As long as the frame rails on your Jay Flight do not measure to be more than 51" apart outside to outside then this hitch will be perfect for you. Please keep in mind that bike racks used on the back of a trailer will...
  view full answer...
• Recommended Hitch for a 5th Wheel Trailer
  No, you are exactly correct. Lots of people don't check to see if their bumper is rated for the Curt RV Bumper Hitch item # C19101 to be attached to it. This definitely will not work with your 5th wheel trailer. You'll want to go with one of our universal options for your 5th wheel trailer, instead. I recommend the Adjustable Width Trailer Hitch item # C13702. This hitch can be bolted or welded to your trailer's frame so long as it is no longer than 51" wide. It has a 500 lbs tongue weight...
  view full answer...
• Will the Curt Hitch C15312 Fit a 2009 GMC Cab and Chassis Van?
  It's not designed to. The Curt Trailer Hitch item # C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item # 3371801102 as you can see from the dimensional diagrams below. However, nothing else is the same so you would need to do some drilling and there may be other parts like exhaust or braces in the way. The only hitch that is custom fit for a 2009 GMC cab and chassis van is the Buyers Products 2" Hitch Receiver...
  view full answer...
  
• Recommended Trailer Hitch for Class B Motorhome with Stretched Frame
  I do have an option for you but as the frame has been modified, your only option would be a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs part # C13702 which can be bolted or welded to the frame. It offers a class III capacity up to 5,000 lbs. The side brackets are adjustable so you can pick the exact width and then you'll need to drill a few holes into the frame to secure it.
  view full answer...
  
• Trailer Hitch Recommendation for 2023 Jayco Jay Flight 265 RLS
  Hey Kelly, for RV applications like what you have the best option is a multi fit hitch like the Curt part # C13702 which fits the standard frame styles that are between 18 and 51 inches apart. This can be welded or bolted in place too. This would be a much better option than trying to reinforce your bumper. This hitch has a capacity of 500 lb tongue weight as well.
  view full answer...
• Recommended Motorcycle/Scooter Carrier With Hitch Receiver For Motorhome
  You do not need a bumper to add a hitch and carrier for your scooter. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the # UF35-946403 which adjusts from 47-1/8 to 77 inches. Either of these hitch receivers will mount to your motorhome frame so a bumper is not needed. This can be used with thetrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 for your scooter. I recommend the Motorcycle Soft Loops # 06303 along with the Erickson...
  view full answer...
• Recommended RV Trailer Hitch For A Newmar Dutch Star Class A Motorhome
  When deciding what trailer hitch will fit your RV best practice is to measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have a width of 18-51" then I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide Item # C13702. It has a maximum 500lbs TW and 5000lbs GTW. If you have a frame width above 51" then I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. It has a maximum...
  view full answer...
• Distance Between Bolt Holes on Curt Adjustable Width Trailer Hitch # C13702
  The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver # C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame widths that are between 18" and 51".
  view full answer...
  
• Is RV Trailer Hitch Available with 10,000 lb Weight Capacity
  If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts # C13702 and # C13701 which are both rated for a max of 6,000 lbs towing when a weight distribution (WD) system is used. These are the same hitch with the only difference being the 13701 has a 2" drop for the receiver. We do have the Ultra Frame Service Body Trailer Hitch Cross Tube # 41991 which has a 16,000 lb towing rating but I'm not sure if it would fit your...
  view full answer...
  
• Clamp On Fifth Wheel Bike Rack Options for eBikes
  I am happy to help you find the right bike rack set up for your fifth wheel trailer. Unfortunately, the Hollywood RV Rider # HLY64FR requires a receiver with at least a 350 lbs. TW capacity. It is not compatible with Bumper Mounted Hitch Receiver Adapters (see photo below), but it is specifically designed to support heavier bikes such as your 2 ebikes. We do not have a bike rack available that is compatible with Bumper Mounted Hitch Receiver Adapters and can support heavier E-Bikes. As...
  view full answer...
  
• Best Trailer Hitch, 7-Way Wiring Harness And Brake Controller For 1986 Vandura 3500 Short Bus
  Hey Mark, thanks for reaching out, and cool bus! The Curt # C13016 hitch you mentioned is for the 1978 - 1996 Chevrolet Van which generally excludes the school bus models. What I can tell you is the # C13016 hitch is 40.87" wide from hole to hole, so what you could do is compare this to the frame of your bus. As long as the width is good, the mounting holes are present on the frame and there are no obstructions the hitch can be used. If the width of your frame is different, the Adjustable...
  view full answer...
• Recommended Ball Mount For A 2016 Ford F-350 Towing A 21,000lb Dump Trailer
  The closest option that we have to your needs would be the BulletProof Hitches 2-Ball Mount # HD256. It has a 2-1/2" shank, 7-1/4" drop, 7" rise, and 22,000lbs capacity when using the 2-5/16" ball.
  view full answer...
• Could Brackets of Curt Multi Fit Hitch # C13702 Mount Vertically
  The side brackets of the Curt multi fit hitch part # C13702 weren't designed to mount vertically but since the crosstube is square there's no reason this wouldn't work. The weight capacity in this orientation would be unknown though.
  view full answer...
• Can the Reese Solo Cargo Carrier Be Used on a Keystone Cougar Travel Trailer
  Yes, the 32x48 Reese Solo Cargo Carrier for 2" Hitches # PS1040100 can be used with your 2017 Keystone Cougar Travel Trailer. You are going to need a trailer hitch to use this cargo carrier so you'd need to add one with # C13702 if you don't already have one or you can just use the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 instead which will bolt up to your bumper.
  view full answer...
• Are All RV Hitches for a 2004 Fleetwood Tioga Rated for 3,500 lbs?
  Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of the Tioga's that year because they all have the same listed capacity. The frame on a 2004 Ford E-450 is right around 39" wide. The Adjustable Width Trailer Hitch Receiver item # C13702 you were looking at will fit your Fleetwood Tioga. The hitch...
  view full answer...
  
• Recommended Trailer Hitch for a 1978 Toyota FJ45
  Hey David, I recommend going with the Adjustable Width Trailer Hitch Receiver for RVs # C13702. This trailer hitch will fit frames 18" to 51" wide, has a class III receiver, and has a 5,000 lb weight capacity. If you need anything else, please feel free to drop a comment and let me know!
  view full answer...
• Determining The Correct Adjustable Trailer Hitch For A 2022 Grand Design Imagine 2600RB
  The frame not being exposed isn't a big issue since it's just covered up with some corrugated plastic sheeting that can easily be pulled down and cut to fit in accessories. The real issue is going to be with the bumper since it sits right where the receiver tube for the hitch would sit. On top of that the stabilizer jacks look like they'll likely also be in the way so while adding a hitch in wouldn't be impossible, it would require quite a bit of work. I recommend reaching out to a local...
  view full answer...
  
• Recommended Trailer Hitch for a 2020 NuCamp TaG Travel Trailer
  Your best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry. We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702.
  view full answer...
• Dimensions of the Curt Adjustable Width Trailer Hitch 13703
  I checked with Curt and was able to find a couple of diagrams of the mounting bracket and the receiver portion for the Adjustable Width Trailer Hitch Receiver item # 13703. I have attached them below. The width is adjustable between 22" and 72". I have linked an installation video below so you can see how to get this hitch set up.
  view full answer...
  
• Option to Carry 3 Bikes on a 5th Wheel Trailer When There is No Room in the Trailer or Truck Bed
  The best option will be to use an adjustable trailer hitch for RV's which will mount to your frame instead of the bumper. This is going to be a much stronger and sturdier option. If your frame is between 18" to 51" Wide then you can use the Adjustable Width Trailer Hitch Receiver for RVs # C13702. If your frame is between 22" to 72" Wide then you can use the Adjustable Width Trailer Hitch Receiver for RVs # 13703. This would allow you to use the bike rack you already have, as long as...
  view full answer...
• Recommended Front Hitch Solution for 2006 Ford F-53 Chassis on 2007 Damon Daybreak RV
  I may have a solution for you, but there is not a custom front hitch available for the 2006 F-53 chassis. Instead, you could likely make the Curt Adjustable Width Trailer Hitch Receiver for RVs part # C13702 or the Curt Adjustable Width 2" drop Trailer Hitch Receiver for RVs part # C13701 work. These are supposed to be mounted on the rear of an RV but they could potentially be installed on the front frame. If the frame is not close enough to the bottom of the camper body part # C13702...
  view full answer...
• Recommended Trailer Hitch for Ford E-450 RV with High Towing Capacity
  For your RV built on the 2003 Ford E-450 chassis, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver # C13702. This is a universal, adjustable trailer hitch designed specifically for use on RVs. It can be bolted to the vehicle frame or welded on for a no-drill application. It will fit frame widths of 18 to 51 inches. This Class III trailer hitch has a maximum gross trailer weight of 5,000 pounds but can be increased to 6,000 pounds when used with a weight distribution...
  view full answer...
• Recommended Trailer Hitch for 2016 Ford F-53 Motorhome
  For your motorhome built on the Ford F-53 chassis, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver # C13702. This is a Class III trailer hitch that is designed specifically for use on RVs and will fit frames that are 18 to 51 inches wide. It can be bolted to the RV frame or welded on for a no-drill installation. This hitch will provide you with a 2 inch receiver opening, a 500 pound tongue weight capacity and a 5,000 pound towing weight capacity. I have attached...
  view full answer...