To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (592 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.etrailer was the best place to get a hitch. I was price shopping for my 2018 Kia Sorento. I have a small 4x4 harbor Frieght trailer. The installation videos were a great help and to be truthful the only reason I called them was because I watched the videos and figured I could do the work. I did however get confused with the wire harness. Daniel was the assistant that answered my call and within minutes he had the help I needed. I put in a picture and it took about 1 hour to install the hitch but wire harness was a little longer then saw in video but still ran and hooked up as I saw in the Video. The ONLY regret I have is I like my accessories on my car to look great ( So I should have bought a new ball and receiver) I WILL BE BACK FOR MORE. Thank You Quinn, Nichole, and Daniel. You made this a project that was effortless. Thank you etrailer for your quality of products and staff.
Ordering process was easy and efficient. Received hitch prior to expected delivery date and order tracking
was right on.
Installation was easy thanks to instructions and helpful installation video that was specific to my vehicle.
Definitely would recommend etrailer to anyone looking to purchase and install their own hitch and components.
Hitch is wonderful. 1 year and no rust visible. Little difficult for 1 person to install but that's on me. Lack of help and correct tools. If you dying will need one maybe two good jack s to hold in place while fighting bolts
I must admit that the ease of installation for a hitch thanks to factory prepared spots in the frame was a factor in my purchase of my 2020 Santa Fe. I really wanted to be able to make use of a hitch mounted bike carrier that I've had for several years.
Installation went pretty smoothly overall thanks to the videos that etrailer provides on the sight.
I did have a bit of trouble with the long bolts on the passenger side, even with my son helping me with the install. I ended up needing a hammer and long screwdriver to tap the bolt through to frame. However, after that, it was pretty straight forward.
Install was made a lot easier thanks to a pair of ramps that I have - $40 from a local vendor that have been well worthwhile for getting under my vehicles for things like oil changes.
The hitch is reasonably well hidden, particularly when viewed from a normal height and distance.
With my 4 bike carrier, even with a bike in the closest position to the tailgate, there's no danger of my bike/pedals hitting the car and scratching up the paint. And, with the drop capability of the carrier, I can actually access the cargo area of my Santa Fe without having to unload my bike. Really looking forward to taking this out for some camping trips and biking some trails.
Edward K.
10/24/2021
Does exactly what I need it to do.
Product arrived quickly and packaged appropriately. I am not a mechanic but after watching the videos on this website, I decided to try this installation myself. The instructions stated a novice installer could complete it in 90 minutes. It took me 3 hours. I installed the hitch alone and took my time to not rush anything. The biggest challenge was lifting the hitch up by myself while installing the mounting bolts. I would suggest a helper for this step but none the less I was able to get it up there with the support of an extra jack stand to hold one end while I affixed the other. This seems like a solid hitch although we will only be using it for a bike rack. It was half the price of the "factory" hitch that the dealer offered and I saved $300 by installing myself. I would recommend this hitch and etrailer.com had the best price I could find.
Keith
7/22/2020
Still happy with the hitch. We do not tow. Only used for a bike rack.
I realize it’s difficult to ship an item as heavy and bulky as a trailer hitch, but this is just an awful attempt. Wouldn’t recommend using them if you live anywhere other than Utah.
I ordered this Curt hitch receiver for my 2017 Kia Sorento and it was very easy to install. it took me about 4 hours to do the hitch plus the wiring but thats mostly because I had no choice but to do this on my back and take several breaks. The wiring for it, which the site specifies which one you need when you pick this hitch receiver, is completely plug and play so its very simple. NO DRILLING IS REQUIRED! I was very pleased with the results of this install.
Daniel
4/20/2019
Excellent
We have not installed our hitch receiver yet, but it looks great! We received it super fast and kudos to UPS ground for delivering to an inconspicuous place at our home. We have been thoroughly impressed every step of this process and have no doubt we will love the finished product!
Well, the installation was a little different than expected... Had no problem lowering the spare tire and dropping the exhaust. The problem we had was that the bolt holes on the passenger side would not line up. After reading other reviews from etrailer and other sources, it seemed like I wasn’t the only one who had this problem. We ended up strapping a row rope to the right side of the hitch and connecting it to a Dodge truck. Pulled until the bolts lined up (didn’t need to move it much.). 3 people, and 3 hours later, we got it done (if you account the rain delay). If there’s a next time, I’ll spend the $125.00 to have someone else install it.
Rachael H.
8/12/2019
That is one of the most inventive ways we have seen customers solve the flexed hitch problem. And it sounds like it worked just dandy! The problem you are describing is not uncommon and is what we call a flexed hitch. The hitches do occasionally get bent slightly out of shape during the shipping process. Just check and make sure that you dont see any cracks in the paint or chipping where it was flexed, because that would indicate the hitch has been manipulated enough to be considered unsafe.
Helpful Links
Great product! Shipped immediatly and best price on the internet. It took us approx 1 hour to install and fit like a glove. Excellent directions and youtube links. Bought a bicycle trailer to haul bikes to Catskill Mountains. Plan on getting a lot of use out of this hitch.
Carrie V.
8/10/2018
Still going strong! A+
Rock solid product and easy to install. Great price, quick shipping and very personal follow up. I purchased a wiring harness for another vehicle a couple years ago from etrailer, Madison was great help then and was the first person who reached out to me with this order. Great team at etrailer!
Glenn
4/24/2018
Works like a champ! Your team is awesome...I have suggested many friends and coworkers consider etrailer for their hitch needs.Regarding your question, if I had to do it again, etrailer would be my first and only stop.
video is spot on for installation. this is third hitch from you guys! So simple for DIY people and quality has been great! Would not hesitate to recommend, and I do not say that lightly.
The hitch was just as the description says, well built. Easy to install.
Installation was straightforward and simple, just follow the video. We did use a lift, and that made it much easier than laying on the ground like I did when installing the eTrailer hitch on my Honda CR-V.
I purchased the Curt hitch over the eTrailer this time because it sticks out a little further past the bumper. I have the Thule T2 Pro XL bike rack and wanted the extra clearance. Your bike rack video shown the installation of the eTrailer hitch using the Thule T2 XL, on a 2020 Hyundai Santa Fe, same SUV I have, and the clearance is only 1 1/2 inches so I wanted a little more clearance. The Curt hitch provides 3 inches of clearance between the bike rack and the back of the SUV.
Thanks for proving all the installation videos, it really helps in making the correct decision.
2019 Hyundai Santa Fe Ultimate 2.0T HTRAC. The hitch is beautiful, top quality built, fast delivery, excellent customer service (Thanks becky!). The only problem was during installation, the video fails to take into account a steel pin that gets in the way on the side over the muffler and also the fact that there is a small gap of about a 1/2 to 3/4 inch between the hitch and the frame of the car on that side as well. If you use a crow bar you can move the pin over and the gap starts out a little big but just tighten the bolts as best you can and that should tighten it up a little. I was told by etrailer that as long as its tightened up it is normal and the gap shouldn't be a problem for towing. Haven't towed anything yet but very happy with purchase and just wish I knew about those little details, otherwise would be 5 stars.
Installed the C13195 in my new Santa Fe so I didn't have any problems with dirt or crud accumulated at the attachment points. I did the most of the work by myself so it took a while to complete the installation. Since I'm 67 years old it took a while but I imagine two hours would be a realistic time for two people. We'll use the hitch to carry a receiver mounted bike rack and tow a trailer. The money we saved buying from etrailer, and doing the installation myself, paid for a complete Thule Roof Rack system. We're to travel. Thanks etrailer.
Application is a 2018 Kia Sorento. Well, you certainly could argue that this is now the heaviest piece of metal on this car. Very substantial, heavy metal attractive hitch nicely powder coated. Arrived with no visible damage and installation generally went without a hitch. (Sorry). Generally. Turns out, whether due to manufacturing tolerances on the hitch or in South Korea, the hitch was NOT an exact fit. Bolt holes did not align perfectly and despite slots, they were out of reach of the threads on the bottom pre-threaded holes. Solution was to insert and tighten sideways mounting carriage bolts to stretch the hitch an ocean rabbit or two in order to get the bottom bolts into their threads properly. then it was an ordeal of back and forth tightening and loosening to slowly coax the hitch into position for bolting, and then into best position for strength. Even after all that, the metal plate that bolts to the frame rails never did align well with an (eventually) modest gap between the passenger frame rail and the hitch's side plate for that rail. See photo (doesn't show it the best but there's a gap). I cranked those carriage bolts as tight as i could without either them giving up or me bending the framerail on the truck. So, now on the passenger side i have two carriage bolts and two vertical bolts carrying the hitch basically in shear, without the full benefit and strength of the clamping effect of that side plate. It will probably be OK for my uses but i'll need to be extra vigilant retightening for a while and it is definitely compromised strength in my non-professional opinion. Other than that, installation instructions and everything were as represented. I probably would have gone with 3 stars but the hitch may be a little over-built so i should be OK. Still, a real bear to install properly.
Purchased for a 2019 Santa Fe - After doing some research and reading reviews on here, I took a chance on this tow hitch. I was very happy with the end results as this hitch looks flawless on my vehicle. One minor issue was that my mechanic said that since this hitch was universal, he had to make a slight adjustment in order for the wire harness to fit. Other than that, everything went smooth and the installation was completed within an hour.
Excellent purchase!!
This is the same hitch that the factory installs. My only issue is that it sits pretty low, that that doesn't have anything to do with the hitch. It is very easy to install and extremely solid. I do use Airlift 1000 airbags to adjust for sag and improve the ride while towing a trailer with 300+ lbs of tongue weight.
The Curt Trailer Hitch makes it easy to use the bike rack. Since it's made to custom fit my KIA Sorento 2016, the installation on the car did not take long for a professional car shop. I've had a chance to use it a number of times by now, and am very satisfied with the purchase.
etrailer made the purchase easier by indicating exactly which hitch is needed.
The hitch is a PERFECT fit foe the vehicle. Installed in the driveway in just under an hour. The 750 lb. tongue weight is incredible. Could not be happier.
Sam
1/24/2022
I could not be happier. The install was quick and easy. The wiring harness is perfect. I have towed my trailer many times, my friends boat 1,500 miles last fall. everything still tight. Saved so much buying from you.
Relatively easy install. The area around the exhaust is precarious at times. Make sure you have all the tools on hand and you can get an exhaust hangar tool online for around $20 and makes dropping the exhaust very easy. After buying ramps, torque wrench, wiring, etc it was still a savings of nearly $200 over anyone else putting a hitch on the car...but now I can't blame anyone if it comes flying off.
Very easy to install. Very good instructions on paper and in video. It took around an hour. Hitch does not stick out too far so it is hidden well. This is the 2nd vehicle I have installed an etrailer hitch on. Previous vehicle was the same easy install.
Installed on a 2020 Sante Fe SEL in my garage, did not lift the vehicle, so a little tight. I also wired for trailer lights and that too was simple. Looks good, should work perfectly. Will be using to pull utility trailer, bike rack, and carrier.
Your provided instructions on finding connectors connections on our 2019 KIA Sorento, proved to be exact and very clear. The combined order of Curt Wiring Harness and Curt Trailer Hitch, was promptly and properly received today, and using your videos, both installations were accomplished with regular hobby hand tools to a perfect fit and fast results. NOW we are looking for a suitable boat to hit the water! THANKS FOR ALL YOUR GREAT HELP!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kristian
2/8/2024
Second submitted review. I had bought the trailer hitch for pulling my mechanics toolbox trailer and was hit with a mobility issue so I now use it mainly for my wheelchair and scooter. I still standby my first review this has been the best company to have purchased from. The E-trailer staff will never turn there back on you, every time you need anything they are only a call away thank You again to your staff.