bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # C12184
Retail:$328.95
Our Price: $204.94
You Save: $124.01
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12184 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (127)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C12184

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 350 lbs TW
  • CURT
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12184 Curt Class 2 Trailer Hitch Receiver

Installation Details C12184 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12184

Average Customer Rating:  4.9 out of 5 stars   (127 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

This hitch was easy to install. Only needed one special tool, a step drill bit. (I got lucky and a friend loaned me his!) The helper parts included to maneuver the bolts into the frame worked great. Only took me about an hour to complete.

Joe

10/26/2023

After a year, I’m still using about once a week to carry my bike on a Kuat rack I install on the hitch. It still looks great! Finish has not rusted and it looks great! Couldn’t be happier!

Etrailer Expert

Mike L.

11/12/2023

@Joe We're happy to hear that!!


by:
Subaru XV Crosstrek

Was easy to install. Was installed on wife's CrossTrek for use with bike rack. Works very well for this purpose.

James

6/3/2024

Still in use. No problems encountered.



by:
2024 Subaru Crosstrek

This Curt trailer hitch is top quality, just like every other one I’ve purchased in the past. Likewise, e-trailer is equally awesome… both in ease of ordering, price, instructional videos and fast delivery.

However, I have to say that this hitch installation was the most difficult one I’ve ever installed. The instructions said the installation time was 20 minutes for a pro and 40 minutes for a novice. I’m a novice at this, but I have installed several trailer hitches in the past 15 years.

There were a few reasons why this installation was so difficult.

1. I was installing it on a 5-year old Lexus NX-300.

2. I was working on the ground without the SUV up on a lift (which I’ve done in the past.

3. I was installing it by myself (which I’ve also done in the past).

When I first started, I dropped the rear of the exhaust system. This was more difficult than expected , mainly because of the decorative exhaust covers on each of the tailpipes.

But, the biggest issue I encountered had nothing to do with Curt or e-trailer, but the fact that all the weld nuts in the frame were so badly rusted that none of the bolts would even come close to starting. So, I had to re-install the exhaust system and go in search of a 12mm x 1.25 tap to repair the threads.

Starting over at lowering the rear of the exhaust system, I’m already a couple hours into the installation. Tapping the threads in the weld nuts was a very tedious and time consuming process because of such limited clearance… I couldn’t use a tap holder. Instead, I was forced to use a small ignition wrench to turn the tap in and out a quarter of a turn at a time.

After that, the install went about as smoothly as it could have… considering I was by myself working on the ground. Definitely not a 40-minute project for me, but I love it now that the installation ordeal is behind me.



by:

The trailer hitch i purchased is being used to hold a bike rack. I installed it myself. It took about two hours and at one time my wife helped me to hold it in place while I attached some bolts. I am very pleased with the hitch and have not had any problems.



by:

The product was great, and the instructional video was great and I followed it to the letter. The only issue is with UPS which absolutely destroyed the box the hitch came in. It was opened, taped and held together with tape. I am glad you secured all the parts with tape to the hitch, otherwise they would have be lost. There were holes everywhere in the box and there was more tape than cardboard. Thanks again.



by:

this is the third hitch from Etrailer that I have installed. I am not the most mechanically inclined person, but I get by pretty well. My first two hitches went great. Good online videos on how do to. Had major issues with the installing this one. When I tried to install the first time, noted that the back two bolts appeared too short and there was not enough of the bolt sticking out for me to screw the nut to - not an issue with the front two. Since I was trying to do this by myself, I thought that it was just me so I stopped the installation. I found out that you cannot aways un-thread the fishing wire from bolt and had to pull them off a thus making them a single use product. I had to order a new set of fishing wires to try the installation again. With the new set of fishing wires and a friend to help out, we tried install the hitch again. Same issue, back bolts too short to tread the bolt on. Double checked placement and noted that there is putty/sealant right where the back bolt is. Shaved off putty/sealant and repositioned hitch, was able to threat bolt but barely. as per the attached photos, you back bolts are pretty much flush with the nut where the front bolts stick out a good 1/4 inch. Since right now I am only using the hitch for my bike rack, I feel ok with the back bolt barely being threaded through the nut, but don't feel safe using trailer that I use from time to time. Will need to drop the hitch again and replace the back bolts with ones that about about 1/4 to 1/2 inch longer. Oh, will have to also buy a new set of fishing wires for the re-install. Moral of the story - this product should of came with two different lengths of bolts, one for the front and a longer one for the back

Etrailer Expert

David B.

10/3/2022

Ill have customer service reach out, I dont know if I have heard this happening to anyone else. The bolts should go at least 2 thread past the nut.



by:

E-Trailer was stellar. The produce was well described on their website; ordering was easy; and delivery was very timely. Thanks



by:

The hitch receiver is much beefier than I expected. It arrived promptly with no defects. Installation is straight forward and simple. Excellent product.

Ken J.

11/27/2023

Still works and looks great. Well made product I would recommend to anyone.



by:

We have a Subaru Crosstrek and we like this trailer hitch because the crossbar is behind the bumper and you only see the lower receiving part of the hitch. It looks great and functions as planned.

Rick

8/18/2023

We have been using the Curt trailer hitch on a Subaru Crosstrek for over a year. We have used it with a bicycle rack, and towing a U-haul trailer. No problems and it still looks great.



by:

You guys did a great job package the hitch, arrived in perfect condition.
I bought a Curt 12184. It fits perfectly on a 2021 Subaru Crosstrek Sport. All 4 bolt holes has to enlarged. I put 2 coats of Rustoelium paint on the exposed metal. Before installation.
Installation is fairly easy but took a couple of hours for the whole procedure

Here is a few pix of the final install.

Feel free to use them.

Jon

11/29/2021

Been using the hitch for a year now. No problems and no rust! It’s a keeper



by:

Fabulous !! Sturdy solid construction. And fit PERFECTLY as stated without having to drop exhaust. It’s best to have helping hands at installation, my son & I completed installation in under 45 minutes



by:

It’s a great trailer hitch.

Darwin

8/27/2023

Great hitch. I use it for my mountain bike rack.



by:

Good instructions, although it was not necessary to lower the exhaust. I used an extention with step-bit to enlarge the frame holes (1 hole per side) and C clamps to hold the hitch to a floor jack for raising the hitch into position and hold it there. About an hour install.



by:
2019 Subaru Crosstrek

Really happy with this product!! I had a Curt Class 2 hitch on my last car for my bike rack, so needed to purchase another hitch as I recently bought a new car. It's sturdy, well made, and I really like that most of the hitch is hidden from view behind the bumper.

The install was straightforward, and I found the installation video posted with the Curt Class 3 hitch on etrailer's website very helpful!! Although the printed instructions that come with the hitch say to use a die grinder (which I don't have) to do the hole enlargement , the video mentions using a "rotary tool" (aka Dremel tool - which I do have, yay!). For a rotary tool to be effective though, the correct bit needs to be used. I purchased a Dremel tungsten carbide cutter bit (#9901) from my local hardware store and it did the trick! It's also very important to wear eye protection and gloves when doing this step as metal filings will be generated from the grinding. Once the holes are enlarged, and you've got the bolts in place, get someone to help lift the hitch in position and fasten the nuts and you're all set! :)



by:

Exactly what I was looking for. Fit my Subaru Crosstrek perfectly and installation was painless following the video. Arrived quick and was a perfect addition for my bike rack.



by:
2024 Subaru Crosstrek

As with past orders, hitch fit perfect, delivered on time, and great customer service. Arrived today and already installed.



by:
Subaru XV Crosstrek

I expected a relatively easy installation that would take less than an hour. I don't have a good place where I can get under my car (a 2021 Subaru Crosstrek) to install the hitch so I went to a local mechanic who I have used a lot. I was stunned when my mechanic charged almost $300 to bolt the hitch in place in place. When I balked he shrugged and said it took much longer than an hour to install.



by:

This is the third hitch I purchased from etrailer. It, like the others was delivered quickly and in good condition. I put the hitch in myself and it took me less than an hour. I didn’t need to drop the exhaust although if you have a pair exhaust hanger pliers you may be able to shave 10 minutes off the install. Of the 4 holes in the frame 2 are larger so I ground them a little and left the smaller holes alone. With the spacers the hitch is 90% hidden except for a bit at the corners. This is a 1 ¼ inch hitch I use for a bike rack and is perfect.



by:
2023 Subaru XV Crosstrek

Good fit on 2023 Crosstrek, definitely follow the install video.



by:

Easy install just like the video. These are excellent receivers curt brand

Tim

3/12/2023

Excellent fit great product easy ion install



by:

I have yet to attach the hitch to my car, but the main issue or concern I had was regarding the shipping process. When I received the box, it was broken and torn in three spots with the hitch poking through. I am hoping no damage occurred, but that will be determined once I try to attach it to the car. I would definitely recommend an alternate box/padding/shipping method to ensure the product remains well protected.



by:
Subaru XV Crosstrek

Hitch looks great on the back of the CrossTrek. Install instructions were very helpful. This is perfect support for our bike rack.



by:
2023 Subaru XV Crosstrek

I can't rate the trailer hitch and lighting kit yet, because the factory won't
deliver my new 2023 Subaru Crosstrek Limited for another six weeks. I ordered
the hitch early so it would be on hand when I receive the car. I can say that
I received everything in two days, in perfect condition, and with free delivery.
Over the years I've ordered at least 3 base plates for my toads, and 5 trailer
hitches for my towing vehicles, and the quality of all these products matched
my best expectations. That doesn't mean every installation was easy, but the
difficult installs were because of the vehicle design, not the etrailer product.
The hitches and base plates always fit, and none ever had a problem when put
into service.



by:
Subaru XV Crosstrek

Very happy with this hitch receiver for my Subaru Crosstrek. I have no plans for pulling a trailer, it's for my bike rack, but it seems stout enough for any use I might put it to.
The installation was simple and straightforward and the instructions clear and easy to understand. I don't have a die-grinder but figured I'd be able to make do with a dremel tool. In the end I just used a small chain saw file to enlarge the access hole at one place in order to be able to get the head of bolt and back up plate through. It took five minutes of effort with the file to do it.
The only thing I'd add to the instructions is the idea of taping the spacers in place (either on the frame of the car or on the receiver) to hold them while you maneuver the hitch receiver into position. With one person it's difficult to get the receiver up in position and get the spacers placed and the bolts through the holes and then the nuts started on the bolts. The most worrisome part of the whole install was the fear I'd push the bolts back up into the frame while trying to get the nuts on them - particularly the first two because you only have one hand to do that as the other is holding the receiver up in position.
If you have someone to help position and hold the receiver up and get the nuts started on the bolts it might save you some frustration but I was able to do it all myself in less than an hour.
From order to installation the whole process was as good as one could hope
Thanks

Milton

5/12/2021

No complaints! Works as it should. And it is unobtrusive when not in use - pretty invisible and not out where you might hit it with knee or shin when accessing the back of the car. It’s five stars.



by:
2018 Subaru XV Crosstrek

I installed this on my 2018 Subaru Crosstrek. It fits perfectly. Only the square hitch is visible below the bumper from the rear. It installs easily without having to drop the muffler as some models have you do. When putting it in place just start inserting it a little to the vehicles left side. Once in and over the exhaust you can shift it back right and into position. I accomplished widening the feed through holes in the car frame with just a round file. I was nervous about losing a bolt into the frame while getting the hitch into final position so I supported it on 2 additional jack stands plus aluminum shim plates until the last second. I fed the fish wires through the holes in the hitch before moving it into position onto the bolts. This was also a one man operation for me.

Daniel M.

4/13/2019

Perfect for my bike rack. The hitch does not reduce the ground clearance of the vehicle.


25
127
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Correct Curt 1-1/4" Trailer Hitch Fit for a 2024 Subaru Crosstrek
    Yes, the Curt Trailer Hitch Receiver part # C12184 is a confirmed fit for your 2024 Subaru Crosstrek. It features a simply bolt-on install with hidden design for a sleek look. It will then work great with all your favorite accessories like bike racks and cargo carriers.
    view full answer...
  • What Curt Trailer Hitches Fit a 2019 Subaru Crosstrek
    Both the Curt trailer hitches # C12184 and # C13382 are confirmed to fit your 2019 Subaru Crosstrek. I recommend going with the latter part # C13382 as it is a Class III trailer hitch with a 2" receiver. This will allow you to use a wider variety of accessories. I have attached an installation video of this hitch on a 2018 Crosstrek for you to reference. If you let me know what you plan on using the trailer hitch for I can make additional recommendations if necessary.
    view full answer...
  • Parts Needed to Install Trailer Hitch and Brake Controller 2024 Subaru Crosstrek
    First thing you'll need is a hitch like the Curt part # C12184 that is a confirmed fit. This is a 2 inch hitch with plenty of capacity that has a mostly hidden design. Then for trailer wiring you would need to start with the part # C56040 which is the easiest install. To convert to a 7-way so that you can install a brake controller you would also need the kit part # ETBC7 with a brake controller like the Tow Pro Liberty # RED24FR.
    view full answer...
  • Recommended 2 Inch Trailer Hitch Option For Bike Rack on 2020 Subaru Crosstrek
    If you're wanting a 2 inch hitch for your Crosstrek so you can use your existing bike rack, we have 2 options that I would recommend for you. If you don't mind The crossbar of the hitch being visible, the Draw-Tite Class III hitch, part # 76209 would be great for you. We also have the etrailer brand hitch, part # e98912 that has the hitch crossbar hidden behind the bumper, so all that would be visible is the square receiver tube and the safety chain loops. If I had to choose one, I'd...
    view full answer...
  • Recommended Trailer Hitch Options for 2020 Subaru Crosstrek
    The trailer hitches are finished with a durable powder coating. The Curt and Draw-Tite hitches are welded together from tube stock and flat steel that are very similar. In my opinion, Curt does a tiny bit better job with their powder coat application. When given the choice, I always recommend using a Class Ill hitch because there's a much greater selection of hitch mounted accessories available for the more common 2 inch Class III receiver. Although the Curt # C13382 and Draw-Tite # 76209...
    view full answer...
  • Availability of Custom Wiring Harness for 2024 Subaru Impreza RS
    There is no specific plug under your bumper but we do have a plug and play wiring option for your 2024 Subaru Impreza RS. It looks like the RS is a hatchback so the correct wiring harness is the # 118744. If it was a sedan model you would need the # 118629 instead. Both of these plug into the connection points behind the rear taillights so no splicing is required. Tekonsha recently confirmed these fit the 2024 model so until we update our site you can ignore the warning that says "Not confirmed...
    view full answer...
  • What Curt Trailer Hitches Fit A 2020 Subaru Crosstrek
    You have a couple of options from Curt for your 2020 Subaru Crosstrek. Both provide a slim profile that hides the receiver tube and has an attractive gloss finish. The Curt Trailer Hitch Receiver Class III # C13382 would be my recommendation between the two. It has a 2" receiver which provides more flexibility as far as accessories availabe as it's the most common receiver size. It also is rated for 525 lbs of tongue weight and while that does not increase your vehicle's maximum tongue...
    view full answer...
  • Trailer Hitches that Fit 2020 Subaru Crosstrek Hybrid
    We have a 1-1/4 inch hitch that fits the hybrid models of the 2020 Subaru Crosstrek like with the Draw Tite part # 36644 or the totally hidden EcoHitch part # 306-X7365 but the Curt you mentioned does not fit your vehicle.
    view full answer...
  • Curt Hitch For 2020 Subaru Crosstrek
    There are 2 hitches available from Curt that are confirmed to fit your 2020 Subaru Crosstrek. A Class II hitch # C12184, it has a 1 1/4" receiver tube opening and is rated 350 lbs TW, and 3500 lbs GTW. A class III hitch # C13382, it has a 2" receiver tube opening and is rated 525 lbs TW, and 3500 lbs GTW. Both hitches have a hidden cross tube, which not only provides better ground clearance, but it also looks really nice on the back of the Crosstrek. If I were looking for a hitch for...
    view full answer...
    Image 1 for
  • Is Draw-Tite Hitch Hidden Like Curt Hitch for 2020 Subaru Crosstrek
    The hidden design of the Curt hitch # C12184 is very appealing and since Draw-Tite actually doesn't have a hidden crosstube design for your 2020 Subaru Crosstrek I definitely recommend going with it over the Draw-Tite # 36644. Curt has a great reputation when it comes to trailer hitches and we have actually found that their hitches tend to have better welds and a thicker powder coat which combined means they hold up better than the Draw-Tite versions. I would like to point out that the...
    view full answer...
    Image 1 for
  • Is There a 1 1/4" Trailer Hitch for My 2018 Subaru Crosstek to Carry a 1 1/4" Bike Rack
    We do have trailer hitch for your 2018 Subaru Crosstek that has a 1 1/4" receiver. With the 1 1/4" receiver you can carry your bike rack without the use of an adapter. The hitch is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12184. The aspect I like most about the # C12184 is that it has a hidden design, meaning all you really see of the hitch is the receiver.
    view full answer...
  • 1-1/4 inch Hitch Options for 2019 Subaru Crosstrek for Carrying Bike Rack
    You need a hitch with a 1-1/4 inch opening based on the dimensions of the shank of your bike rack. Unlike lumber which uses arbitrary measurements for wood hitches measurements are basically exact. So for a hitch in the correct size for your bike rack for your 2019 Subaru Crosstrek we have the Curt part # C12184 which will work well. Or if you prefer a hitch that can be totally out of view when not in use we have the EcoHitch part # 306-X7601 which can have the lower hitch opening totally...
    view full answer...
    Image 1 for
  • Will Curt Trailer Hitch Receiver # C12184 Fit With Thule Helium Bike Rack On 2023 Subaru Crosstrek?
    The distance from the center of the hitch pin hole to center of receiver is more than the 1-1/2" you need on the Curt Trailer Hitch Receiver # C12184. When we installed this receiver on a 2021 Crosstrek in our shop we found the hitch pin center hole to be 2" from the from the rear edge of the bumper. With your 2023 being the same body style you should have 3" of clearance with the Thule Helium Bike Rack # TH44VR having 5" of distance when folded up. I recommend installing the T-One Vehicle...
    view full answer...
  • Will Thule T2 Classic Bike Rack Clear Rear 2019 Subaru Crosstrek Bumper with Curt Hitch Installed
    With the Curt Trailer Hitch Receiver # C12184 installed you will have about 1-1/4" from the closest part of the Thule T2 Classic Bike Rack # TH9045 to your 2019 Subaru Crosstrek. From what I can tell that is one of the wheel trays but if any other part of the rack is closer to the vehicle then that's where the 3-1/2" of clearance we're talking about comes into play - so you definitely have enough clearance! Attached is an installation video of the trailer hitch as well as a review video...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for 2019 Subaru Crosstrek
    For your 2019 Subaru Crosstrek, I recommend using the Class III trailer hitch because it is a stronger and more durable hitch offering more options for ball mounts and other accessories due to the more standard 2 inch receiver. My recommendation is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13382. If you really want a 1-1/4 inch receiver, I recommend going with the class II hitch receiver # C12184. There is not a class I hitch receiver for your vehicle but the only...
    view full answer...
  • What Does Curt Trailer Hitch part # C12184 Weigh
    The Curt trailer hitch part # C12184 that you referenced weighs 29 lbs.
    view full answer...
  • Comparing Curt and Draw Tite Class II Hitch That Fits 2024 Subaru Crosstrek
    The Curt hitch part # C12184 that you mentioned is the better option for your 2024 Subaru Crosstrek and what I would recommend. The big difference is that the hitch opening is attached to the bottom of the hitch crosstube which allows it the be a lot more hidden once installed. This means that only the hitch opening hangs below the bumper instead of the Draw Tite part # 36644 which has the entire crosstube hanging below the bumper as well. The Curt also has a shorter install time listed...
    view full answer...
  • Concealed and Visible Trailer Hitch Options for 2018 Subaru Crosstrek
    For your 2018 Subaru Crosstrek we offer several hitch options, all shown on the linked page, that include both 1-1/4-inch Class II and 2-inch Class III types. We generally always recommend the 2-inch option when it is available since these hitches typically offer a higher weight capacity for towing and much broader compatibility with the range of available accessory items like bike racks and cargo baskets. We also have hitches # C13382 (2-inch) and # C12184 (1-1/4-inch) from Curt that...
    view full answer...
  • Will the Hitches for a 2024 Subaru Crosstrek Fit a 2024 Subaru Impreza Sport?
    No, they won't but congrats on the new car! The two hitches that fit a 2024 Subaru Crosstrek, item # e98912 and item # C13382 are not compatible with a 2024 Impreza Sport. There is a major redesign from the 2023 model year and it may be awhile, end of the year, before we have a hitch available for your car. (08/15/23) I just checked with all of our vendors: Curt, Draw-Tite, EcoHitch, and Stealth-Hitch and no one has one listed yet. What needs to happen is these manufacturer's have to get...
    view full answer...
  • Will the Curt Hitch C12184 Fit a 2024 Subaru Crosstrek Wilderness?
    Yes, it will! The Curt Hitch item # C12184 has been confirmed to fit all models of the 2024 Subaru Crosstrek except for the hybrids. You will have no compatibility issues installing this on a Wilderness model. If you are planning on towing you will also need a wiring harness item # C56040 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. I have linked a couple of installation videos below so you can see...
    view full answer...
  • Availability Of A Trailer Hitch For A 2022 Subaru CrossTrek
    Good news, we do have a few options for your 2022 Subaru CrossTrek. The first one is the etrailer Trailer Hitch Receiver # e98912 which is a class III hitch capable of towing a maximum of 3,500 pounds, and a maximum tongue weight of 350 pounds. The next option we have for your CrossTrek is the Curt Trailer Hitch # C13382 which is also a class III hitch and features the same weight ratings as # e98912. The last hitch we have for you, is the Curt Trailer Hitch # C12184. This is a class...
    view full answer...
  • Are Pull Wires Included With the Curt C12184?
    The Curt Class II Hitch # C12184 does indeed include the pull wires to get the carriage bolts through the frame of your 2019 Subaru Crosstrek. I included a video of an install we did on a 2019 Crosstrek for you to check out as well.
    view full answer...
  • Will Thule T2 for 1-1/4 inch Hitch Fold Up on 2019 Subaru Crosstrek with Curt Hitch Installed
    When the Thule T2 Classic TH9045 is folded up there will be 3-1/2 inches from the center of its hitch pin hole to the nearest rail. The Curt hitch part # C12184 that you referenced would allow the rack to still fold up as it's not really recessed under the rear of the vehicle and we have pictures of a Kuat bike rack folded up with similar clearances and there wasn't an issue at all.
    view full answer...
    Image 1 for

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Rick G
Video by:
Rick G
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Ronnie R
Written by:
Ronnie R
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.