Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(16 reviews)
Price: $207.48
In Stock
CURT
Add to cart
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Part Number: C11317
In Stock
$207.48
Retail:$367.95
You Save: $160.47
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (16)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11317
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11317 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2011 Subaru Impreza Sedan - excluding WRX STi
- 2013 - 2014 Subaru Impreza Sedan - WRX
- 2012 - 2012 Subaru Impreza Sedan - WRX and WRX STi
- 2013 - 2014 Subaru Impreza Sedan - WRX STi
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11317
Average Customer Rating: 4.9 out of 5 stars (16 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Bjorn06/27/2023
Great product my second Curt product, and I will buy again. I think that instead of drilling larger holes, the instructions should follow OEM installation methods. If not, maybe include directions to paint bare metal exposed from drilling prior to install.
by: Guthrie05/12/2024
Great hitch! I've pulled a lot of my buddies out of the ditch with it and it didn't rip off or break. Overall a solid product. Installation is easier the second time once you get the exhaust off it's easy enough. Took me and my buddy about a hour and a half start to finish. You have to round out the holes to get enough clearance to slide the rectangular shim through on Subarus. Easy enough with a drill. Could also be accomplished with a file.
I'm in the rust belt, getting the exhaust off can be difficult.
by: Wes09/28/2021
This hitch fits nicely under the bumper (GV Impreza WRX) and is not too noticeable.
by: Ryan S.12/18/2012
Solid product. Perfect fit (the authorized Curt installers said so). Reasonably priced. The best products are the ones that do their function perfectly, no more, no less. This hitch is one of those products. The email updates on shipping status were helpful, and shipping was fast! There was _no_ cutting of the rear bumper and no extra drilling even though the instructions said there may be some drilling necessary.
Charlie
8/25/2014
Ryan, did you install on a WRX?
by: Adam06/19/2020
2011 Subaru Impreza
I ordered a hitch for my Subaru Impreza to carry a Thule bike hitch rack. The hitch arrived on time. Unfortunately when we were installing the hitch, we realized that we were sent the incorrect screw/nut (3 of the 4 were correct, the 4th was the wrong size). I tried to contact etrailer, but was unable to talk to a person (long wait times the couple times I tried to call) and the company did not respond to my message sent through their website. This was disappointing as I had had no issues talking to someone prior to purchasing the hitch when I had questions. To sum, the hitch is great (5 stars) and the customer service mixed (3 stars).
by: Elliot B06/03/2014
2014 Subaru Impreza
Have not installed the trailer hitch yet but everything seems to be in order. Sales people were quick to respond to my inquiries and the product arrived on time.
by: Zac05/09/2018
2011 Subaru Impreza
I have a muffler delete on my car so the right hitch for my car just popped in place with no need to remove anything. Also the wires they give you to snake your bolts into the holes are ingenious and I need more of them in my life.
by: Michael06/06/2021
2013 Subaru WRX
Fits 2013 WRX sedan..paired with c45023 drawbar.
Install was simple..did it solo. Remove bumper, remove mufflers(I removed 1 heat shield..then found out you dont nees to so 1 stayed), and drill out holes and install. If one person helps hold into place as you bolt in makes it easier..i used my body to prop it up.
At most half a day job if you live in NE like me where bolts are all rusted out. Could do it in an hour or 2.
Solid built..came fast.
by: Chuck R05/16/2023
Installing was easy enough, and completed independently. Works great!
by: dylan w12/24/2015
Great hitch. Went on my 2013 sti sedan very easily fits and works perfectly. Excellent costomer service from etrailer
by: Steven 11/28/2019
2008 Subaru Impreza
The hitch went right on. Great directions in the package! Seems very sturdy built
Steven
12/1/2020
Still very nice
by: ScottyN01/14/2012
Solid fabrication and quality product. Fit perfectly on my car. Delivery was quick with a prompt follow up.
Thanks!
by: Keegan08/05/2021
Great product, well built
by: Tyler 07/01/2021
2013 Subaru Impreza
As advertised works good on 13 wrx
by: Aravind08/17/2021
2014 Subaru Impreza
by: Stephen 09/11/2022
16
16
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch That Fits 2013 Subaru Impreza SedanWhile there is a trailer hitch that fits a 2013 Subaru Impreza sedan the # DT24959 you referenced only fits an Impreza 5-door wagon with a single exhaust. Instead you will need Curt Trailer Hitch # C11408 UNLESS your '13 Impreza sedan is a WRX or WRX STi model; if that is the case you will need Curt Trailer Hitch # C11317. Both of these are Class I hitches with a 1-1/4" receiver and complete bolt-on installations so you will not have to drill into your Subaru's frame.
view full answer... - Lightweight Bike Rack Recommendation for 2011 Subaru ImprezaThe lightest weight bike rack out there that is also very easy to use is the Kuat Beta # B202-114 which weighs in at 12.6 lbs. This is also a very high quality rack too which means it will be very reliable. Now you'll need a hitch installed on your vehicle so for that you'd want the Curt # C11315 for if you have a 5 door wagon with single exhaust # C11120 if you have a wagon with quad exhaust or # C11317 if you have a sedan. If you plan on carrying any womens or alternative framed bikes...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2011 Subaru Impreza WRX WagonThe 2011 Subaru Impreza WRX has different configurations and depending on which one you have will determine which hitch, if one is available, fits. If it has single exhaust, there is no hitch option available. But, if it has quad exhaust, you can use Curt hitch # C11120. I have included a link to the installation details for you. Curt hitch # 11317, fits a 2008 to 2012 Subaru Impreza Sedan, but not the STi models. It does not fit the 5 door model (wagon). Curt hitch # C11120 fits a 2011...
view full answer... - Does Curt Trailer Hitch for 2013 Subaru Impreza WRX STi Require Fascia TrimmingThe Curt Trailer Hitch part # C11317 is a confirmed fit for your son's 2013 Subaru Impreza WRX STI and would not require any modification of the lower fascia. As long as the exhaust on his vehicle is the stock dual exhaust this would fit and work well.
view full answer...
- Parts Included with the Draw-Tite Trailer Hitch # 24886 for a 2008 Subaru ImprezaThe Draw-Tite Class I Trailer Hitch, # DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball, # 19256, or a 2 inch hitch ball, # 19258. Please note, this hitch will fit your 2008 Subaru Impreza as long as it is the hatchback model with single exhaust. This hitch will not fit the WRX STi models. If your Impreza is a sedan, not STi...
view full answer... - Hitch And Bike Rack For A 2013 Subaru Impreza WRX SedanThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item # C11317 is going to be the easiest to install out of the two hitches available for your 2013 Subaru Impreza WRX Sedan. The second hith is the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - 2" Item # 306-X7279 which requires the rear fascia to be removed to install. The Curt has a maximum tongue weight of 200 lbs while the EcoHitch has a 300lb maximum tongue weight. Both have a 2000lb gross towing capacity. You...
view full answer... - Trailer Hitch Recommendation for a 2013 Subaru ImprezaYou will need to get a new hitch for your 2013 Subaru Impreza, the Curt Hitch # C11315 that you referenced is only designed to work on Imprezas from 2008-2011 so it would not work for your 2013 even though they look similar. I would recommend the Curt Hitch # C11286 if you have a hatchback with single exhaust, Curt Hitch # C11120 if you have a hatchback WRX with quad tip exhaust, or Curt Hitch # C11317 if you have a Sedan WRX.
view full answer... - Trailer Hitch and Wiring Recommendation for a 2010 Subaru Impreza SedanWe have just what you need for your 2010 Subaru Impreza sedan. For a hitch you would want the Curt part # C11317 which has been confirmed as a fit and would work well. For trailer wiring you then would want the part # 118464 which is a confirmed fit as well. For a ball mount you would want the part # 3594 and then for a 2 inch hitch ball part # 19258 or # 19256 for a 1-7/8 inch hitch ball.
view full answer... - Recommended Trailer Hitch Receiver for 2009 Subaru Impreza WRX Sedan with Dual ExhaustFor your 2009 Subaru Impreza WRX sedan with dual exhaust, I recommend the Curt # C11317 which is a confirmed fit for your vehicle. You will also need the security strap # 18050 when using this hitch for cargo carriers or bike racks, but not for towing. If you will be doing light towing with this hitch receiver, I recommend the ball mount # 3594 and hitch ball # 19256 or # 19258 for a 2-inch diameter ball. For wiring, I recommend the T-One # 118464 which is an easy installation...
view full answer...
- What Trailer Hitch Will Fit a 2011 Subaru Impreza WRX with Dual ExhaustI checked with CURT and the Trailer Hitch # 11317, will fit a 2011 Subaru Impreza WRX with dual exhaust. I have included a link to the installation instructions for you to view. If you plan on doing some towing, the hitch comes with a ball mount, pin and clip. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use T-One Vehicle Wiring Harness, # 118464. I have included a link to the installation details for the wiring as well.
view full answer... - Availability of Trailer Hitch for 2014 Subaru Impreza SedanWe have several hitches available for the 2014 Subaru Impreza sedan, depending on the model. If you have the WRX or WRX STi models you will want Curt hitch # C11317. If you plan on doing some towing, you will want ball mount # C45521, 2" hitch ball # A-82, 1-7/8" hitch ball # A-80, and wiring harness # 118581. Pin and clip are included. If you plan to do some light towing you will want ball mount # C45521, 2" hitch ball # A-82, 1-7/8" hitch ball # A-80, and wiring harness # 118581. Pin...
view full answer... - Hitch Receiver for a 2009 Subaru WRX SedanI would be happy to help you. I looked through our fitguide and found a hitch that will fit your 2009 Subaru WRX Sedan that is not an STi. The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11317 is a confirmed fit for your WRX. This custom fit hitch receiver bolts directly to your frame with included hardware. This is a class I hitch with a 1-1/4" receiver they do not make a 2" receiver for your WRX. For a compatible bike rack you can't go wrong with the Thule T2 Classic...
view full answer... - Hitch Recommendation for 2011 Subaru Impreza 2.5iThe Draw-Tite Max Frame Class II Hitch # 76209 is not confirmed to fit on the 2011 Subaru Impreza but we do have hitches that will fit your vehicle. Whether or not you have the Sedan or Wagon is going to be the first determining factor. I've created a quick list of hitches that are going to work with each trim package/car body below. If you have the 2011 Subaru Impreza Wagon: w/ Single Exhaust - # DT24959 Draw-Tite Sport Frame Class I Hitch w/ Quad Exhaust - # C11120 Curt Class I Trailer...
view full answer... - Weight of Trailer Hitches for 2013 Subaru Impreza WRX STiWe carry two trailer hitches that fit your 2013 Subaru Impreza WRX STi; The EcoHitch # 306-X7279 and the Curt # C11317. The EcoHitch is a more difficult install but has a much better look that the Curt. A reputable shop shouldn't have an issue doing either one though. They likely handle much more complicated repairs than any trailer hitch. The Curt is the heavier of the two, it weighs 36 pounds when packed up to ship. The EcoHitch is less at about 27 pounds for shipping.
view full answer... - Recommended Trailer Hitch, Wiring, And Ball Mount For 2009 Subaru ImprezzaFor your 2009 Subaru Impreza, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 for a hatchback or theCurt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item # C11317 for a sedan (excluding the WRX STiModel). Both hitches are rated for 2000 lbs towing and 200 lbs tongue weight max. For your ball mount, I recommend the Draw-Tite Drawbar for 1-1/4" Hitch # 3593. For a hitch ball I recommend # 19256 for a 1-7/8 inch ball or #...
view full answer... - Availability of 2 inch Trailer Hitch Receiver for a 2009 Subaru ImprezaFor your 2009 Subaru Impreza you will need to use a 1-1/4 inch hitch receiver as there have been no 2 inch options manufactured. For a 2 inch hitch receiver you would have to get it custom made. From the options that we have to choose from, your hitch receiver will depend on your model. Part # DT24959 will fit a 5-door wagon with single exhaust, part # C11317 will fit a sedan. Neither option is a confirmed fit for a WRX STi though. You can use a hitch expander, like the Brophy # HTAD,...
view full answer... - Hitch Installation Instructions for 2012 Impreza HatchbackFor the 2012 Impreza Hatchback, the correct hitch would be the Curt # C11286. For WRX or WRX STi Hatchback models, the correct hitch would be # C11120. The # 11317 you mention is a fit for the WRX Sedan model only. Of all the hitch manufacturers we deal with, I believe Curt does the best job on their installation instructions. I have linked you to the instructions for both hitches mentioned above. If you click the provided link, you can see a video showing the hitch being installed on...
view full answer...
- Will the Class I Hitch # C11317 Fit on a 2011 Subaru ImprezaYes, I checked with the manufacturer, Curt, and the # C11317 Class I hitch has been confirmed to fit your 2011 Subaru Impreza Sedan. Some items you may need to go along with your hitch purchase are listed below. Wiring # 118464 Drawbar # 3594 Hitch Ball # 19258 or # 19256 Hitch Lock # e98879
view full answer... - Trailer Hitch for 2012 Subaru WRX With Receiver That Fits Through Cutout in Bumper FasciaWhen installed, the Curt # C11317 receiver tube would sit right under the bottom edge of the rear bumper fascia. It would not use the cutout in the bumper cover. We do offer a hitch that would install in that manner, though. The EcoHitch # 306-X7279 would indeed install so that the receiver would fit through the cutout you describe. The hitch also includes a magnetic cover that would conceal the receiver opening when the hitch isn't being used. For a trailer wiring harness, you'll want...
view full answer... - Trailer Hitch for a 2014 Subaru Impreza WRX SedanFor the 2014 Subaru Impreza WRX sedan the correct trailer hitch is # C11317 that you have referenced. The recommended ball mount is # C45521 and the pin and clip is # F-4. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. Trailer wiring will need to be obtained from a Subaru dealer.
view full answer... - Compatibility of 2 Inch Trailer Hitch Receiver with 2008 Subaru Impreza 2.5i 4 Door SedanAt this time there is not a 2 inch hitch option available for your 2008 Subaru Impreza sedan from any of our manufacturers. The EcoHitch # 306-X7261 is a fit for the WRX models, but is not compatible with your Sedan. I reached out to the manufacturer and although they haven't tested it for a fit, they think the frame would line up but the trim would be an issue. There is not a 2 inch option available for your vehicle as it has a very limited capacity, so only Class I hitches like #...
view full answer... - Available Trailer Hitches for 2012 Subaru Impreza WRX Sedan for Use with Hitch Bike RackFor the 2012 Subaru Impreza WRX sedan we offer a 1-1/4-inch Class I hitch from Curt, their part # C11317. This light-duty hitch has the capacity to transport up to 2 bikes on a compatible Class I hitch bike rack. No 2-inch hitch receivers are offered for any versions of the 2012 Impreza. While it is possible to use a hitch adapter like # HTAD to allow installation of a 2-inch hitch bike rack in a 1-1/4-inch hitch, this practice is not recommended. Use of ANY adapter has the unavoidable...
view full answer... - Are There No-Drill Application Hitches Available for a 2008 Subaru ImprezaThe Curt trailer hitch, # C11317, that you have referenced, could require drilling to enlarge an access hole, but you could also use a file or rotary tool and not need to drill. I have included links to the installation instructions and video showing a typical installation.
view full answer... - How Visible Will CURT Trailer Hitch # 11317 Be On 2011 Subaru Impreza WRXThe item you selected, CURT Trailer Hitch, part # 11317, will fit your 2011 Subaru Impreza WRX. The hitch will be visible from the rear and you will be able to see the cross tubing of the hitch. The hitch is designed to be tucked up out of the way, but cannot be completely hidden, as you would not be able access the receiver. With any hitch, it will be somewhat visible but the hitch manufacturer does try to design the hitch to be mounted as close to the vehicle or out of sight as much...
view full answer...
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Product Experts Available Now!
Call 1-800-940-8924
Bjorn
6/28/2024
After a year and at least 6,000 miles of using this hitch with my cargo carrier around the U.S. I have no complaints.