Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Tighten up your connection. This hitch receiver immobilizer keeps your tow bar, drop receiver, bike rack and other hitch-mounted accessories from rattling and shifting while you're on the road.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey guys, Randy here at etrailer.com. Today we're going to be taking a look at the Blue Ox line of hitch immobilizers. Now, these work out great in a lot of situations. Any time you're using an accessory in a receiver tube opening and it doesn't have an anti-rattle device on it, basically you get a lot of movement. Especially with cargo carriers, we get a lot of side to side movement, that weight transferring back and forth.Now before we get to the installation process, let's take a look at some of the test course footage before and after. Essentially, before we get this installed, you're going to see this cargo carrier move side to side quite a bit.
We've got it loaded down with about 120 pounds. That's when we're doing the slalom. As we go over the bumps, you'll see this back end tip up quite a bit. Now, the cargo carrier's going to have a little bit of that anyway, but we're eliminating all of that from the shank, so it keeps everything much more stable.Now you'll see in the after-footage, all that side to side movement is completely eliminated. Once we get into the bumps, you can see there's still a little bit there from the actual cargo carrier tolerance, but we've got nothing coming from the hitch.Now regardless of whether you're using a 2" hitch or 2-1/2" hitch, or what we've got installed here going from a 2-1/2" hitch with an adapter to a 2" accessory, they're all going to work the same way.
This part with the key stock comes in on the backside. Then this U-bolt you can see, as we tighten that down, it pulls down on the accessory. This U-bolt pulls over. That's going to lock it right into the side of our receiver tube opening. Especially when we're using adapters like this, there's so much slop in that system, everything moves side to side.
You can see it's nice, heavy duty steel construction with a black powder coat finish. Blue Ox always makes good products. Then we've got the zinc-coated U-bolts. They use locking Whiz nuts here. As we get everything tightened down, we really don't have to worry about it coming back apart.
Just does a great job in getting that set. The 2" by 2" version looks identical. This is the 2-1/2 by 2-1/2. Basically, it just takes all that discomfort and all that play and that movement out of the equation so you don't have to deal with it anymore.Now another option's the Roadmaster Quiet Hitch. This one, where the Blue Ox doesn't have an 1-1/4" fit, does have an 1-1/4" fit. Has a 2" and a 2-1/2" fit. Basically, this one, this loop goes down around the hitch. This bar is going to come down and press down on the item. Now I like this one quite a bit. On really heavy loads, on your really heavy trailers, or in really heavy flat tow setups, maybe you're hauling a 1500 4x4 Ram, it gets pretty heavy. This one only eliminates the up and down. It eliminates most of the side to side, but as items get really heavy, there is still a little bit of transfer or a little bit of motion side to side. I really like the Quiet Hitch. I think it does a great job. But for total containment, I think the Blue Ox is just a little bit better.Now for all of immobilizers, the installation process is going to be the same. This is the one that fits the 2-1/2" hitch down to a 2" product or 2" accessory. You've got the small lips here. It's going to sit in behind the lip of our hitch. We want to bring it right out to the edge of it. We've got a U-bolt that's going to go in this way. Place our nuts on there. Then we've got our U-bolt that's going to come in from the top. Same thing, throw our nuts on there. Now we want to grab a 9/16" socket and we're going to start tightening these down.It's going to help to pull over on the shank and also pull down on the shank just to help us ensure that we got a great hold on them. Now we're going to grab our torque wrench, want to get all four of those torqued down.As you guys can see, this takes care of a very common problem that we have. I really like this one. I like that it has the total containment on both sides. Really helps to eliminate that movement we experience. I think if you're having that issue or if you've got heavier items that you're loading up and you can feel that transfer, I think it's a great idea to pick one up.
Average Customer Rating: 4.4 out of 5 stars (38 Customer Reviews)
Tighten up your connection. This hitch receiver immobilizer keeps your tow bar, drop receiver, bike rack and other hitch-mounted accessories from rattling and shifting while you're on the road.Put this on my 2018 Jeep Wrangler which has a two inch hitch receiver plus a hitch extender. The outside dimension of the hitch extender is 2 1/2" so that's why I went with this product instead of the 2" one. This one fits perfectly and the hitch extender is now very snug, no movement at all.
It doesn't fit the ram 2500 factory rec eiver
Easy to mount, secure and enjoy a rattle free ride. Works as advertised on the hitch receiver of my 9000 lbs trailer. Looks great
Fotios
8/23/2021
It is working great. A year later and it still looks like new and functions as advertised. Never have to worry about rattles in the hitch area any more.
Item works great! We actually use it inverted to hold the hitch up on our weight distribution hitch for our 9,000lb travel trailer. We used it on 3,000+ mile trip that went through the Rocky Mountains and it did not show even a hint of working loose. I would definitely recommend it!
needed extra, heavy duty support on a four foot extension. carry an ebike carrier. this double sided support worked for me. no wobble. little pricey, but like the confidence knowing carrier rides ok.
So far so good it seems. I just put it on today. But the design looks like its about the best on the market. With the only exception being it recommended I use the "Loctite Red" on all screws. I don't have any on hand, and it would be cool if you could include it in the package. I'm planning on stopping by the autoparts store and seeing if they have a small container I could use. Other than that, it looks to be well designed. I expect it to work great.
Does not fit a Chevy 2500
Katrina D.
4/12/2024
I see that this is supposed to fit a 2.5 inch hitch receiver. Can you please confirm what size hitch receiver you are using this on?
Made the thule lectric bikes (ea 65 Lbs.)on our thule bike rack much more steady less bouncing on bumps helped keeping them both more stable@
I have a mixed feeling about the product as it does not fit the application I purchased it for. My Dodge RAM 3500 Diesel 4x4 bumper does not provide the clearance for me to install this product and I specifically purchased the product that is supposed to fit. I have not returned it as I may do some trimming to either my bumper or the receiver hitch [plastic guard].
As to the product itself, it is technically very sound and I can see that the method by which Blue Ox has chosen to eliminate rattling of the receiver hitch is very well thought out. The product itself would rate a five star review, but the fact that it doesn't fit the application for which it was ordered, part number appropriate, impacts my overall rating.
So, application rates a two star, doesn't fit as intended.
Product construct rates a five.
Service support, price and delivery rates a five as well.
Therefore overall rates a sound four considering all the above.
I hope you fully understand why and my rationale for this lower than usual rating for product I've purchased from you all.
My very best regards, and sincerely your service support and delivery always rates a five star!
Arrived quicker than I thought and was an easy install. Took all the play out of the hitch. Have yet to tow with it tho and I'll re-review when back from our next trip.
Got this to stop the movement in my rock tamers . Certainly did what I was looking for. No more annoying rattle driving down the road . I showed my son in-law and now he wants the same set up . Not sure I will use the loctite or not as i like taking then off when we're not pulling the 5th wheel , i was thinking of changing the nuts to locking nuts . E trailer knew just what i was looking for and got it to me a day earl .
The product looks well made but it will not fit on a 2022 ram 2500 pickup. Unfortunately I will need to return. Not enough clearance between the hitch and safety chain hookups. Would need to cut out the existing safety chain hookups and re-weld new steel plates. But the gen y iron grip hitch pin do work ok
As shown and working as advertised. Stopped trailer sway and annoying clink clank clunk of the hitch. Time will tell how long it lasts. I was hoping for 1/2"- 20 threads. It is 3/8"-16. Maybe it will be strong enough for a 2 1/2" class V hitch. One thing for sure, I am going to TEST it. ;*)
I used to have a little forward and back movement in my hitch receiver. I could feel a clunk when leaving from a stop and then again while coming to a stop. I added this hitch immobilized and it all went away. I’ve had it on for close to a year now and wouldn’t tow with out it.
The Blue Ox Hitch Receiver Immobilizer II, 2.5" arrived on time and without package damage. Unpacked and installed in less than 5 minutes. Zero knocking, noise, and movement of the hitch after Immobilized installed. Very Strongly Recommended.
Rock solid immobilizer using the Curt 34 inch hitch extension. Truck is a 2020 GMC AT4, 3500HD with a 2021 Cirrus 820 camper.
Great product, Worked very well on my long neck Torsion bare Hitch. E trailer's sales consultant Bridget was very helpfull, very knowledgeable. E trailer was very fast about getting me the part i needed. I am very pleased not only with the product but very pleased with E trailer. I have been recommending E trailer to my friends. Thanks.
The stabilizer used with the double 2" hitch receiver took all wobble & wiggle out of the bike rack. Excellent product!
The product was easy to install; didn't take more than 5 minutes. I haven't had the chance to test it with my utility trailer hooked up yet but will soon, that will be the real test as to how satisfied I am with the product.
I will say this for etrailer.com, they are awesome. I originally passed up ordering the item from etrailer.com just to save a few bucks and ordered it from another site. I had to end up cancelling the order from the other site. I ordered it last Thursday, from etrailer.com, and they bumped up my shipping at no extra cost to me so I could get the part by Monday. They didn't have to do that but they did.
All my future towing purchases will be with etrailer.com not just because they are located in my home state of Missouri but because they provide great service. I have already recommended them to friends and co-workers.
used it to take the sway/bounce out of the my 48" hitch extension. Worked!
Easy to install and works like a champ. Added bonus, when you have an expensive hitch attached, is more security.
300 miles of hwy and 100 miles of washboard roads towing 8500 lbs... Welded lips ripped off the plate. Not worth its weight in scrap price. Pictures are on an older phone, if i can edit the review later I will try.
I've used the 2.5" X 2" before and now needed the 2.5" x 2.5" anti-rattle. Great product and easy to use
Very happy with this product, was looking for something to tighten up the hitch area and this Immobilizer has done the job.
Received on time and packaged well. Installed in less than 10 minutes onto my 2.5 inch hitch. No more movement.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
10/21/2024
Awe man, I am sorry you are having trouble getting this anti-rattle to work on your factory hitch. The Ram factory hitches do have thicker side walls and collar compared to after-market hitches. I just wanted to make sure you are trying to use the u-bolts around the shank of the ball mount or accessory you are using? Is the L bracket able to sit flush with the collar of the hitch? If you want to send me photos I can help. Otherwise, a return is possible too if you want to return it.