Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball.
Features:
Specs:
Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (4037 Customer Reviews)
Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 10,000 lbs with the 2-5/16" ball.My hitch arrived on time and packaged up perfectly I was notified along the way so I knew when it would be arriving. Great quality American made product. Looks almost too nice to be a trailer hitch you can tell the company put some time into the design and manufacturing of this hitch. Simple and easy to stow I probably won’t need to buy another hitch for a long long time but if I did it would be another BW hands down
Can a trailer hitch be gorgeous?!! Ordered this online and received it 2 days later. Husband installed in less than 10 minutes - very heavy and high quality - he loves it. Thanks for the awesome service!
Love the hitch and fast delivery.
Great product. Very nice finish. Looks great on my truck
Grat price on a sharp looking drop hitch for my big black jacked up truck
I have one of these on one truck and they are great so getting another. Have ordered many items from e trailer and the are great to work with and there customer service is fantastic.
Great service Adam was very helpful and nice. Got my order in just 3 days.i tried to order the same item some were else and waited 3 months finally had to cancel the order.e trailer did me a solid.
My only disappointment is that I spent money on other mounts when this one was all I needed! After you purchase this product you will ask yourself how did I survive before! Great product!!!!
Has worked flawlessly. Adjusts easily and stows when you want to save your shins.
Great quality, beautiful finish
Just as advertised, fits perfect and looks great.
Works perfect looks great
GREAT SERVICE
This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open.
The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.
This is a serious hitch!! Well designed and built. Easy to install and change out. You only need a locking hitch pin on the receiver as the ball and carrier are machined into the hitch. Super fast delivery from etrailer. Great company and I buy from them for all my trailer and truck needs.
I purchased this hitch for my 2024 GMC Sierra 3500 which has the multiple tailgate. The hitch was in the stow position but still damaged my tailgate when I had the tailgate fully down and used the step feature. it bent the metal and scratched the paint. So please be aware this hitch is not recommended for the 2024 GMC sierra 3500 with multiple tailgate.
Well built product! Excellent construction, durable, functional, will last a long time for sure! Best hitch I have ever owned. Moreover, etrailer sent this to me faster than I could have expected, took only 3 days. Outstaning service, great associates throughout at etrailer! Highly recommend buying this hitch through them if you want it fast and at a superb price!
Convenient. One thing bothers me about this hitch, and that’s the noise. It’s very noisy and rattles. I bought anti rattle clamp and the rubber silencers but still makes noise. Also it always looks pointing inward toward the truck, it always catches my attention when I do a walk around.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
8/2/2024
Works awesome super nice having the 2inch or tje 2 516 not having to hope you have one in the truck still have a awesome finish not flaking off or chipping would buy again but this thing seems it will last