Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. 2-Wire design.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 700 raw lumen capacity and produces 490 effective lumens.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (118 Customer Reviews)
7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. 2-Wire design.Although labeled as a utility light, I mounted it on the rear quarter panel of our cube truck on both left and right sides to illuminate the side or rear tire area that the two back up lights could not reach. The design was exactly what we were looking for as it was a surface mounted light with only a small 1 inch hole that needed to be drilled dead center for wire placement. We used some three-quarter inch by number eight panhead stainless screws and soldered connections with heat shrink tubing to complete the installation. Ordering was easy and shipping was lightning quick. Thank you very much!
I attached two of these clear utility lights to each aft side of my boat trailer. They are wired to the backup lights on the truck. This gives me excellent lighting when backing down my curving driveway. Clear utility lights are much brighter than regular backup lights and allow me to see the driveway even on the darkest nights.
Excellent!
After a long while of trying to find a comparable replacement on that A site, I found etrailer.com. They had an exact match to the light that was originally on my trailer. The installation was simple and now I have two matching lights again and one neither is flooded with water.
Aaronm
8/24/2018
Unfortunately, the new light has leaked and now has water in it. Otherwise it seems to be doing well.
These illuminate adequately for what I purchased them for. Brighter would be better but they help take some of the guesswork out of backing up in the dark. I’d say they light up as well as my truck’s reverse lights. These are mounted on our 20’ boat trailer.
Charlie
7/4/2019
I am still happy with this purchase and would recommend it to future buyers.
was looking for small back up lights- water tight for boat trailer- these should fit the bill. excellent ordering and email status and delivery- I'll be ordering again if I need anything else. thanks
These I think are going to work awesome. Haven't tested it in the water yet, but as far as brightness these will light up the darkest boat ramp. Installed on the back of boat trailer for night time launch/load, and wired into my reverse lights. Highly recommend if your looking for a great backup light.
I mounted the lights on the rear bumper of my travel trailer. I ran the wire into a storage compartment that had 12VDC. I connected to the power and added a rocker switch. The lights are very bright and the price was good. Can't wait to go camping and put these lights to work. I added a voice activated remote control: when backing up, I yell out the window "Hey Honey, go turn on the backup lights". Hasn't worked yet.
This was so easy, and the prices beat all! thank you so much. oh and delivery was next day.
Mike
10/29/2024
Still working great, This has to be the best place i have found for light replacements. Fast and great pricing.
I just installed them on my Freightliner MDT as backup lights. Installed 4 of these. They work just as they should. The hole pattern was exactly the same as with the old lights.
Product was as expected, no issues so f ar!
These are very good lights. I just mounted a pair of these below my brake/turn lights on my enclosed trailer, and they work very well. Now I'll be able see when parking the trailer at night, and people will actually know I'm trying to back up now.
Easy to mount LED Bight using as backup on horse trailer.
World class lights. Waterproof and bright!! Will buy again for sure. 4 screws and one hole for wires. My application is back up lights for a trailer.
Good unit for the money and purpose served (reverse light on ATV). Lighting was good as well - as bright as I wanted.
Great reverse light.... really bright and easy to mount and wire for the do it yourselfers.
These are great lights. I bought two of them to use as reverse lights on my boat trailer. They light up bright and allow me to see behind the trailer. I liked them so much I bought three more use as a side marker light and two for cabin lights on the boat. Shipping was nice and fast as well. Thanks etrailer.
Rob M.
9/14/2013
Adrian,I too just installed a set of these as reverse lights on my 5x8 utility trailer, based on your input. Thanks, they work great.I ordered these with grommets no need with the flange and the brackets to mount them to. I had to do some minor drilling to have the holes mate but that was no problem.I fished my wiring through the manufacturers existing routes and tapped into my reverse lights, attaching them with a Hopkins 4 Flat extension that I cut in half.Im in business!
I'll give it 5 stars if it wasn't for the long time before shipping...very happy with product, installed four in my horse trailer and make a huge difference. Also installed 6-1/2" Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear - BUL78CB in back of trailer for safe night horse loading/unloading. see before and after pics
Wanted this light as a 12 volt light in our ice fishing shanty. Works very well, gives off a lot of light and because it is LED it uses very little power. Have had it on for 6 hours at a time and it continues to work very well. It does produce a somewhat straight lite beam so I mounted it on the top corner of the wall/ceiling pointing across the shack and it lights the room well, would work well as it was designed for a vehicle. It is our only light in a 8x12 room.
I mounted these on the rear and sides of my 42' 5th wheel so I can see when backing up. These lights are very bright and light up the area behind the camper very well. Great price too!
Good and bright. Makes backing up a trailer at night much easier.
Greg P.
11/27/2022
1 year later and no complaints.
Product is of good quality, and the lights are quite bright. I like that the housing is plastic, we are in the Northeast, and these lights will see a considerable amount of salt. We will see if the wiring holds up to the road salt!
Tom R.
5/8/2016
They made it through an Upstate New York winter mounted on the bottom of a fire truck, no problems at all!
I got these for my trailer for when I am backing down the ramp in the dark and for putting the boat away at home where I don’t have any lights in the carport. Man are these bright and do the job. It lights up the area behind me and I never have to worry about hitting anything while backing down or putting the boat to bed. If you’re tired of not having enough light on your boat trailer look no further.
As for usage, I have had these on for a year now without any issues whatsoever. Also, I take the boat out at least twice a week during the winter and several times a week spring through fall so they get lots of use.
Installed on my 2014 Polaris Ranger as Cab and Backup Lights.
Ernie G.
1/26/2018
They work great as back up lights for My Polaris Crew
Works good, and is decently bright for a back up light. Like the two wire design and flange mounting. Put it on a boat trailer for back up lights. Did add extra sealant around the flange to clear lens, just to help the factory plastic welded connection. Have had no issues so far.
Bright lights. Added these to my Utility trailer to help with backing into my driveway at night, and to have reverse lights on the trailer. Easy to install. Had to change out the 4 pin plug and wiring on the trailer to the 5 pin and 6 wire. The hardest part was pulling the new 6 wire cord through the frame, much thicker than the 4 wire cord. Take your time and it pulls through just fine.
Do you have a question about this Work Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron P.
2/1/2015
Lights work great! They have made backing up a long dark driveway much easier. Now I have plenty of light on each side of my boat trailer. Slim profile and water proof just right for a boat trailer.