BulletProof Hitches Weight Distribution Shank for 2" Hitches - 8" Long - 7 Hole Adjustment

Video Transcript for Ultimate Overview of the BulletProof Hitches Weight Distribution Shank for 2" Hitches

Hello, neighbor, Steven here with etrailer.com. Today we're looking at a bulletproof hitch weight distribution shank for two inch hitches. So folks, this shank will slide into your hitch receiver. That's a two by two inch receiver tube size. And it's gonna provide a nice attachment point for your weight distribution systems head assembly. Now this has been designed to work with most weight distribution systems out there.

You have seven adjustment holes letting you level your trailer with the tow vehicle. And with those seven holes, two pins per option, you have five riser drop options available. And you could also flip the shank over if you need it to, to get the rise of the drop. It's got a nice sturdy powder coat steel construction, and it has kinda like a texture powder coat on it, which is really nice. You get the hitch pin and clip included.

Now this has a max weight capacity of 22,000 pounds and a max tongue weight of 3,000 pounds. Now I'm using a 13 inch ruler. Overall I get 12 inches. As far as an overall height, I get right at 10 inches. And if I was measuring center hole to center hole, it's 1 1/4 center to center between them.

And if I want to go from the center of the hitch pin hole here to the center of the adjustment holes, I got about eight inches on center. Now if I go from the center of this pinhole to the front edge, I get nine inches. And if I go from the back of the weight distribution center, I get three inches from the center to the back. So a nice weight distribution shank for the bulletproof hitches. I'm Steven, thanks for watching.

.