Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily mount your winch to your hitch receiver with this mounting plate. The steel plate has mounting holes for your winch and fairlead. Handles make it easy to move the winch from the front to the rear of the vehicle.
Features:
Note: Capacity is based on capacity of vehicle receiver. Does not fit large-body truck winches - they are considered too heavy to be portable and too strong for receiver capacity.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number BDW20011. This is the Bulldog 2-inch by 2-inch hitch mounted winch mounting plate with the handles. This part will provide a portable and flexible mounting solution for your winch. It has the fully welded heavy duty frame and even the handles. If you'll notice right here between the winch mount and the receiver tube, it is double gusseted on top and on the bottom to give you extra strength. It is designed to fit any standard 2-inch by 2-inch hitch receiver.
This can be used for truck winches up to 12,000 pound with the standard 10 by 4-1/2-inch mounting bolt pattern and it will also fit smaller 6-1/2, 4-1/2-inch bolt pattern winches. I just want to try to show you the holes you see in the bottom of the plate there. When you say the mounting patterns, you're talking about these mounting holes. The outer holes, the distance between them center-to-center is 4-1/2 inches and on the outer ones you can see it would be 10 inches and then on the inner ones would get you your 6-1/2. It will use either 10 by 4-1/2-inch mounting bolt pattern or the 6-1/2 by 4-1/2-inch mounting bolt pattern. Now on the very front .. let me turn this around ...
I'm going to show you the holes on the front. You'll notice the holes here. These are at a 10-inch pattern center-to-center so this will accept any of the fairleads that have a 10-inch mount pattern. It does come with this adapter plate and the included hardware to install it. If by chance you're going to use a fairlead that has an 8-inch mount pattern, if you look at these inner holes there it would be 8 inches.
All you have to do is attach this right to that and then attach your fairlead to there and you can use the smaller 8-inch mount pattern if you prefer. Now one last thing I do want to let you know is the capacity of this mounting plate will be based on the capacity of the vehicle hitch receiver. That should do it for the review of part number BDW20011. This is the Bulldog 2-inch by 2-inch hitch mounted winch mounting plate with the handles. .
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Quickly and easily mount your winch to your hitch receiver with this mounting plate. The steel plate has mounting holes for your winch and fairlead. Handles make it easy to move the winch from the front to the rear of the vehicle.Great design to move from trailer to trailer...............well built piece of equipment.
I'll admit, the price was a big factor.....you get what you pay for. Two of the four holes to mount the winch were off by more than an inch, so i had to drill new ones. The wiring harness was no better. The quick disconnect had intermittent electrical connectivity....had to modify it. Manufacturer was little help, they offered to drill the holes but that required shipping the mount 3500 miles at my expense. They made no offer to compensate me. They did mail a new quick disconnect. The mount works well but i had to work for it as well as pay for it!
This worked out good as I used it for the Truck and can move it to my Bob Cat / Car Trailer , I fabled up receivers and move it from one to the other in just a few minutes very handy Then I just store it in the garage, we mounted everything on brackets and made a plate to mount onto it as well so all in one .
The bracket looks nice and well built the only unfortunate thing is the box arrived torn up and some hardware missing looked as if it were a return that had been sent back and uninspected and left in disarray hard time feeling warm and fuzzy about it since it was supposed to be new
This makes the winch more useful for me as I can switch the vehicle it’s mounted on.
WHY DO COMPANIES SHIP HEAVY ITEMS IN ORIGINAL BOXES THAT WEIGH 25PLUS POUNDS ? THEY SHIP TO YOU ON A PALLET . DO YOU PEOPLE EVER SHIP ONE OF YOUR HEAVY ITEMS TO YOUR SELVES TO SEE HOW THEY ARRIVE ?????
Well made, strong, I really like that it's a one piece unit and that's why I spent the extra money..
There were other models much cheaper that are bolt together which I don't recommend...
Great
works well.
Box was split full length on three corn ers
Very heavy duty, well built!!!
A very good piece of equipment, but for $xxx it should be.
I am very pleased with the service and the quality of the product.
great
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
1/11/2023
I am sorry to hear you didnt get that happy feeling like you shouldve! I will send your information to our customer service team, and we can at least get you the missing pieces.