bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. Leveling Jacks
  4. Stabilizer Jacks
  5. Fifth Wheel Camper
  6. Landing Gear
  7. Sidewind Jack
Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs
Bulldog

Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs

Part Number: BD500162
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$499.83
Retail:$625.00
You Save: $125.17
Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Screw travel is 18". Get an additional 18" of travel with the drop legs. Crank sold separately. 1-800-940-8924 to order Bulldog camper jacks part number BD500162 or order online at etrailer.com. Free expert support on all Bulldog products. Great prices and Fastest Shipping for Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (46)
  • Q & A (0)
  • Photos

Bulldog Camper Jacks - BD500162

  • Leveling Jacks
  • Stabilizer Jacks
  • Fifth Wheel Camper
  • Landing Gear
  • Sidewind Jack
  • 7001 - 8000 lbs
  • Bolt-On
  • 2 Jacks
  • 36 Inch Lift
  • Bulldog
  • Steel

Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Screw travel is 18". Get an additional 18" of travel with the drop legs. Crank sold separately.


Features:

  • Landing gear is designed for use with your 5th-wheel trailer or RV
  • Large, self-leveling footplates provide excellent stability
  • Connecting rod telescopes to desired length to fit your application
    • Position jacks as far apart as you need to and still be able to connect them for tandem operations
  • Sturdy steel construction
  • Black-finished outer tubes and zinc-plated inner tubes resist corrosion
  • Mounting brackets weld onto front of trailer frame
  • Jacks bolt to brackets with included hardware
  • 3/4" Socket or wrench (sold separately) is required


Specs:

  • Bracket height:
    • 32" Retracted
    • 50" Extended
  • Total lift: 36"
    • Screw travel: 18"
    • Drop leg travel: 18"
  • Combined weight capacity: 8,000 lbs
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Footplate dimensions: 8" long x 6" wide
  • 5-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



500162 Bulldog Fifth Wheel Landing Gear - 8,000 lbs




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs - BD500162

Average Customer Rating:  4.5 out of 5 stars   (46 Customer Reviews)

Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Screw travel is 18". Get an additional 18" of travel with the drop legs. Crank sold separately.

by:

Boxes were torn up. Inside the main shipping box. So it came from etrailer like this. No paperwork at all. Everything was torn apart and scratched. I expected better.

Jenny N. profile picture
Etrailer Expert

Jenny N.

6/4/2024

Oh my goodness! I am sorry that it came this way. We will be in contact with you about the damage it received.



by:

Etrailer was great and shipping was fast. However the shipping was abusive to the packaging resulting in bent shaft on leading jack, which made it impossible to install gearbox for proper operation.
Being mechanically inclined I could disassemble and straighten shaft hoping no stress fractures ending its life sooner than expected, or use shaft from previous jack. But why? I bought new parts for a reason.



by:

Delivery was on time, but the box it arrived in didn’t fair we’ll and parts were hanging out of the box! But everything was accounted for and the parts were well wrapped. Installation was very easy. The only issue was the locking pins mount plate is tack welded to the primary leg that the motor moves up and down. Those mounting plates had to be removed to install the lead and follow jacks. A grinder made short work of that. I didn’t put the mounting plates back on, instead I used my spring loaded pins that were on the old legs, they were still in good working condition. Also I didn’t use the adjustable cross over rod that came in the package . I opted to use the one that was on my old jacks, it was constructed of heaven gauge tubing and didn’t have a much (slop) movement in it. Also did not use the plastic housing gear box, I purchased a aluminum house gear box from e-trailer a few months back and used that one keeping the plastic for a spare. Very satisfied.



by:

The Bulldog Landing gear set seems to be very well made and installed very easily. It was a slightly configuration than the pieces I removed but the legs went in without any real difficulties. It helped to have a second pair of hands but that wasn't crucial.
As this set doesn't come with a motor I re-used mine and it bolted right up.
In hindsight I should have taken more photos of the unit and parts I removed as I had to think carefully about some steps of the reinstall before I got ahead of myself.
The ordering and subsequent follow-up by etrailer was very good. I felt like they truly care about my experience. I did have some questions about shipment and delivery and they answered my questions promptly.
If I had any criticisms to make it would be with shipment itself. The cardboard box arrived a bit beat up and had some tears in the sides. A couple of the bags inside were also torn and loose parts (bolts etc.) were rolling around inside the box. Thankfully nothing had fallen out, that I'm aware. This was more to do with the choice of carriers though, nothing to do with etrailer itself.
On the whole 2 thumbs up. I'd definitely re-order from etrailer again!

Greg H. profile picture

Greg H.

3/16/2016

Dwayne,We are replacing our landing gear too with the Bulldog 162 and have an electric motor from the old set. It was good news to hear that an electric motor can be installed on this set of manual Bulldog landing gear legs. So you had no trouble with the connections being the same size??????? Thanks for the info.

Dwayne S. profile picture

Dwayne S.

10/24/2016

The system is still working well to date although to be fair we have not used it much since the install. A move to a different city has limited our camping this past year. I hope to remedy that next year.



by:

Yes we received our Fifth Wheel landing on time, it was exactly what we wanted and the quality was over and above our expectations compared to prices they were selling in stores that sell trailer stuff, you were the best. We have been purchasing from etrailer whatever we need for our Fifth Wheel because you have the best prices and the best quality products always. We can only invite anyone looking for anything for your Fifth Wheel, Winnebago, etc, buy it from etrailer and then watch their movies ON YOU TUBE that will show you exactly how to replace your piece as that is what we have done and if it was easy for my non mechanical husband, anyone will understand the videos. ETRAILER YOU ARE THE BEST.

Mario profile picture

Mario

2/12/2019

GREAT, HAD NO PROBLEMS, WISHED THERE WAS AN ETRAILER IN CANADA, FIR THISE WHO DON’T KNOW YOU.



by:

I ordered this jack set to replace an existing unit that was an electric unit that would go up and down with a switch. This unit I found out after installation would not work with a motor. I ordered a suggested motor from etrailer as well and the unit still does not work. I don't know if it's the motor or that the motor grounds through the unit it attaches to. Other than that it works fine. I would like it to work as designed though so it's not so much work to get on and off of my truck. Thank you.

Jenny N. profile picture
Etrailer Expert

Jenny N.

5/25/2022

This landing gear is not confirmed to work with a motor. A similar set up that comes with a motor would be part # LG-3 which is a weld on set with a 34 inch lift and rated for 6500 pounds.



by:

The leg pin came out because of the design, it is not a strong locking mechanism to not pull it all the way out. (My wife pulled it all the way out) Afyer furthet inspection, in addition to poor locking mechanism, the size of the pin is not adequate for the specified weight of the jack.



by:

Received package Wed. evening. Package was in great shape and the contents were wrapped well. Everything was complete. Cant wait to install it . Tory who helped me with questions was awesome. Thanks for all your help. I love Etrailer.com Thanks again, Mark

Mark B. profile picture

Mark B.

12/20/2020

It works excellent and is a great product. Very pleased, Thanks



by:

I bought this product to replace a broken landing gear on my 2002 Forest River Sierra Sport 5th Wheel. Upon arrival I quickly discovered that the weld stops were on the wrong sides of the legs for my application, but with a cutting wheel and welder, I was able to remedy this problem fairly easily. The fit otherwise was spot on. I installed this landing gear by myself with no difficulty. After I got it securely mounted, I realized that the old motor from my broken landing gear was different. I have now ordered the high speed replacement motor LG-141893 to install on this landing gear. Overall, installation was easy and the quality of the product appears to be adequate for my application. Thanks to the etrailer.com staff for their help in assuring that this product would work for me.



by:

The product came earlier than advised...we figured that would happen. It was all packaged together with no real attempt at protecting the whole unit aside from some shrink wrap around the two seperate landing gears. With that said, there was some paint chipping on the cross bar that connects the lead gear to the following gear, big stinking deal I'm the only one in there.
The landing gear unit was installed about as easily as could be expected considering I was laying on top of my generator to get the drivers side (following) landing gear, in which coincidently, I had to trim a 1/8th inch off of the top cleat that is welded onto it. The distance between the top and bottom was off just that much that the unit would not fit into place if I did not do it. Knowing that I would measure the distance before feeding up into the brackets and climbing in and then over the generator to ind out it was a bit off. Of course the passenger side (lead) gear went in without a hitch and with full easy access.
I installed the bulldog 8000 lb. unit on our 2007 raptor 3712 ts toyhauler. Note: I never downloaded the instructions so...From jacking the unit up from 16" of front clearance to 32" clearance, two small cuts in the under belly to swing the unit in, to the above mentioned customization to completion was 4 hrs. all by myself. I would recommend this product and etrailer.com. I raised and lowered the unit a few times just to try it out and everything was just fine. I should mention I had a previously purchased a metal housed reduction gear and motor that I install instead of the plastic housed gear that it comes with. I have only one complaint and it is the fact of climbing into the generator hatch off of a ladder became a nuicance. But it has nothing to do with the product just the things we have to do if we want to do the work ourselves to save a lot of money.
Again, I would recommend this product and etrailer.com. I hope this review helps!



by:

Brittany thanks… she helped me with a timeline that wasn’t easy to deliver on time. Bulldog Landing gear Package received in perfect condition and installation needed some refinement to fit in my old 98 Nash 5th wheel but with a little work it’s done… works great!



by:

I am very satisfied with the landing gear. I had a huge problem with my old set seizing up at the campground. The new ones work great! Also u hige shout out to etrailer. I actually was trying to order another product from them but it couldn't get here in time so they called me in person on a Sunday to help me get some in time and suggested they had the bulldog one is stock and guaranteed thursday delivery, well it came Wednesday. So etrailer is very helpful and great customer service!



by:

Just installed this on my 2009 Seville 40' camper. Installation went well, it was tight getting it to fit in the existing landing jack hole due to the welded bracket for the easy pull pin. I thought there would be zerk fittings for grease but there is none. They seem beefy, time will tell how they hold up. all in all it seems like a good product.



by:

Bolted right up, easy to install,work great. Did not have any issues wIth the Bully Dog landing. Box was in bad shape from shipping and nuts and bolts scattered out in box but all there. The only I did not like there is no grease fitting on them, I will install a Zerk fitting on them for easy greasing. I would recommend the Bully Dod Landing yhey worked great for me. ALAL W.



by:

We haven't installed yet, but we are very impressed with everything about this purchase. We originally ordered another set, but it was out of stock. Finally, we decided to go ahead and get the Bulldog set. Ashley immediate took care of canceling the original order and getting the process started for the new set. She estimated we'd have it in a couple of weeks. I was amazed to get a notice that the new set was already on the way early thus week, and it arrived in 2 days! This is an exceptionally well made set, and I can't wait to get on the road again!

This has to be one of the best online purchase experiences I've ever had. It was my first experience with etrailer, but they will be my first choice from now on! Great people, great products,and great service! Who could ask for more? Thanks, etrailer!



by:

Nice well made like all Bulldog jacks. These have 18 inches of jack travel and a pinned drop foot.



by:

Wow. What a great jack setup for the price. And what a good company to buy from. It was fast delivery. I'd recommend etrailer to anyone.



by:

Fit perfect Ronald at etrailer was a great help



by:

Thank you. Received lift with one piece missing. Called and talked with Kaylyn R. She got the part on its way. Three days and was all installed today. Works great. Again thank you.



by:

Nicole Thank you , I did not expect it to arrive today WEDNSDAY that was very quick
Thank you
Now the fun begins , I found a local RV repair man here in SAN ANGELO TX , I can not do all the work
Because I have COPD I WILL prep as much I can to get this project completed
Again thank you for your help and service



by:

Great set of landing gear for the money. Similar gear was nearly double the price at other vendors.



by:

Easy install and better than the origin al.



by:

Works like it should.



by:

Everything turned out good.Took about 2/12 hrs to complete install.All works fine THANK YOU!!!!!



by:

Very easy insulation, now the motor is making a slipping noise.
Could you please recommend one for me.
Thank you
Bob


25
46
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

  • Recommended Landing Gear Replacement for my Lippert Components Setup
    Yes the Bulldog Tandem Landing Gear Set part # BD500162 would be a great like for like replacement for your current Lippert Components landing gear. If you do not already have one the Replacement Manual Override Crank for Bulldog Powered-Drive Trailer Jacks part # BD500203 is a good fit.
    view full answer...
  • Availability of Motor Kit for Bulldog Landing Gear BD500162
    For a 13K 5th wheel the Bulldog Tandem Landing Gear Set # BD500162, which is rated for 8000-lbs, will be more than adequate. According to my contact at Bulldog they do not offer a motor kit for this particular jack. For powered landing gear you might instead consider # LG-1 from Stromberg Carlson. This landing gear is rated for 5500-lbs, still enough for your trailer. For a higher-rated powered jack kit use part # RP500708. This is a dual-motor set-up rated for 8,000 pounds.
    view full answer...
  • Adding a Motor to an Older Fulton Landing Gear Set
    We do not have any Fulton branded motors but my contact at Fulton said that if your Fulton landing gear set looks like the Bulldog Tandem Landing Gear Set # BD500162 then you can use a motor and switch kit from Stromberg Carlson, like part # LG-217884, because they are all pretty much made the same way. If your Fulton landing gear set does not look like the previously mentioned Bulldog set then you will need to replace the landing gear as the older Fulton version is not compatible with...
    view full answer...
    Image 1 for
  • Could Bulldog Landing Gear # BD500162 Fit 2006 Raptor Camper
    The Bulldog landing gear set part # BD500162 that you mentioned is designed to fit the standard landing gear dimensions so it should work well. I attached a picture that shows the dimensions that this landing gear set would fit with. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of lower...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2004 Carriage 5th Wheel Trailer
    It definitely sounds like the internal gears on your existing landing gear system are shot so a complete replacement is your best option. I'm not able to track down what specific model system would have been installed at the factory on your 2004 Carriage 5th Wheel Trailer but I can absolutely help you find a compatible replacement. The Bulldog Tandem Landing Gear Set # BD500162 for manual operation that you were looking at will likely work great. It features standard weld stop/bracket...
    view full answer...
    Image 1 for
  • What Can Damage The Internal Gears Of My 5th Wheel Jack?
    Though I could not find anything about the T46059 repair kit you referenced, but odds are the jack isn't rated high enough for the weight of your trailer. Or there is more than just the gears that need to be replaced. What you will probably want to do is replace either the leg, or what may be a better idea, the whole system. For the leg, it will depend on if it is the lead or follow leg, but as the Lippert Venture Lead Leg Repair Kit # LC146059 is for the lead leg, you will need the Replacement...
    view full answer...
    Image 1 for Image 2 for
  • How to Pick Out Landing Gear Replacement for Fifth Wheel Camper
    In order to pick out a direct replacement for the landing gear on your 2007 Desert Fox 38U we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2011 Jayco Eagle 5th Wheel Trailer
    You do have landing gear with an odd measurement, but all of the replacement landing gear will be the 29.5 inches or 33.5 inches long. The # LC241846 is 29.5 inches long on that outer tube. Even with the difference in height, the mount locations for the brackets will be 17.5 inches so you can get a replacement landing gear set that is compatible. I've attached a photo to help. For that same 8,000 lb capacity, I recommend # RVLG-8000 to give you matching legs that are compatible with...
    view full answer...
    Image 1 for
  • How to Know What Trailers Bulldog Landing Gear Will Fit
    The Bulldog # BD500162 landing gear bolts to its brackets, but the brackets would weld to the trailer frame. You should be able to reuse your existing brackets as long as they're not damaged or excessively corroded. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for a Keystone Laredo 5th Wheel Trailer
    Bulldog Tandem Landing Gear Set # BD500162 is a great option for a manual set to replace the landing gear on your Keystone Laredo. I have linked a video review for you. The handle is not included so use # BD500203 to add the crank handle. For an electric set you could use # RVLG-8HDL and add motor # LC142178 and, if you don't already have one, a switch # LC145236.
    view full answer...
  • Motor Availability for the Bulldog Landing Gear Jacks BD500162
    I spoke with my contact at Bulldog and he said that he has heard of people using the landing gear motor part # 75391 with the Bulldog jacks part # BD500162 that you referenced. But since they have not fully tested this they can't guarantee it will work just fine. However, we had a customer come back and leave a review saying they used this motor with this jack set and it worked well. My contact at Bulldog said that this jack set was originally designed for a trailer manufacturer that was...
    view full answer...
  • How to Pick Out Landing Gear Jacks for Trailer
    In order to pick out a direct replacement for the landing gear on your trailer we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the #...
    view full answer...
    Image 1 for
  • How to Pick Out Landing Gear for 1996 Jayco Eagle 225 BH
    In order to pick out a direct replacement for the landing gear on your Jayco we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the # BD500162. I...
    view full answer...
    Image 1 for
  • Fitment of Lippert Landing Gear Motor on Bulldog Gear Box on a 2008 KZ Durango 355RL
    Without knowing what exact Lippert motor you have on your 2008 KZ Dorango 355rl, I cannot be for sure it will work for your Bulldog 8,000lb landing gear # BD500162. If your motor is Lippert # LC142178 which has a lift capacity of 6000 lbs, then yes, it will fit. My contact at Bulldog said most landing gear motors have standard attachments that can be used on the Bulldog Tandem Landing Gear Set. I have linked the above mentioned products to this page for your convenience.
    view full answer...
  • How to Pick Out Replacement Landing Gear for a 2000 Alpine Lite 29rk
    In order to pick out a direct replacement for the landing gear on your 2000 Alpine Lite 29rk we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...
    Image 1 for
  • How to Pick Out Landing Gear Replacement for a Cougar 291RLS-2SL
    In order to pick out a direct replacement for the landing gear on your Cougar 291RLS-2SL we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...
    Image 1 for
  • Fit of Bulldog # BD500162 Replacement 5th Wheel Landing Gear on 2004 Keystone Montana Big Sky
    The Bulldog # BD500162 landing gear bolts to its brackets, but the brackets would weld to the trailer frame. You should be able to reuse your existing brackets as long as they're not damaged or excessively corroded. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in...
    view full answer...
    Image 1 for
  • Landing Gear Jack Replacement Recommendation for 2009 Bighorn 3055RL
    In order to pick out a direct replacement for the landing gear on your 2009 Bighorn 3055RL we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...
    Image 1 for
  • Solution for Broken Fulton Landing Gear Box
    Strangely enough Fulton does not offer replacement landing gear boxes for the landing gear sets. You'd need to look into getting a new set like the Bulldog part # BD500162 which would fit and work well.
    view full answer...
  • How to Pick Out Replacement Landing Gear for a 2002 Carriage by Cameo F34CK3
    In order to pick out a direct replacement for the landing gear on your 2002 Carriage by Cameo F34CK3 we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install...
    view full answer...
  • Replacement Landing Gear that Could Fit Motor of 2004 Forest River Cedar Creek
    If the landing gear set you have on your Forest River is a Bulldog setup the motor of it would fit on the Bulldog # BD500162 but if instead you have the more standard brands of Venture, Stromberg, LCI, or Lippert you'd want the # LC333966.
    view full answer...
  • How to Pick Out 2014 Rockwood Ultralite 5th Wheel
    In order to pick out a direct replacement for the landing gear on your 2007 Desert Fox 38U we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...
    Image 1 for
  • Replacement Bulldog Landing Gear Recommendation for Prowler 5th Wheel
    For a manual crank set of landing gear by Bulldog you would want the part # BD500162 that has an 8k lifting capacity. For a powered set you would want the part # RP500708 made by the same manufacturer. I attached a picture that shows the dimensions of the legs of the jacks for you to compare to what you have on your trailer. The Bulldog stuff works great and typically fits as a replacement for most landing gear sets on trailers. The dimension picture shows the powered jacks, but the important...
    view full answer...
    Image 1 for
  • How to Pick Out Landing Gear for Trailer Based on Mounting Bracket Dimension
    The easiest way to pick out replacement landing gear sets is to go by the distance between the brackets either on the trailer or on the legs themselves so that you can pick out a set that will match up to the trailer without needing modifications. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you,...
    view full answer...
    Image 1 for


< Previous
123. . .5



Do you have a question about this Camper Jack?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Jenny M
Updated by:
Jenny M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.