Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs

See what our Experts say about this Convert-A-Ball Trailer Hitch Ball Mount

• How to Choose Correct Ball Mount Rise/Drop for a 2022 Nissan Rogue with etrailer Hitch Receiver
  Thanks for reaching out and your purchase of the etrailer Trailer Hitch Receiver # e93ZR for your 2022 Nissan Rogue! To choose the correct ball mount you'll need to figure out the difference between the height of your hitch receiver and your trailer coupler. To measure your hitch receiver height you'll measure from the ground to the top inside of your receiver. When we installed this on a 2021 Rogue we found this height to be 11-3/4". Then for your trailer coupler height you'll need to...
  view full answer...
• Recommended Tire Chains For 16.00R20 Michelin Tires
  Hey Mark, The Titan Chain Alloy Loader Double Duty Tire Chains # TC2627S-2 would be the correct size for your tires but are super heavy duty and more so designed for a tractor tire so they might be a bit too heavy for your application. I did speak with Titan Chain and they stated that they would just custom make you some for your tire size with thinner links to reduce the weight to something a bit more manageable for your intended use. To put this in perspective these chains weigh 189lbs...
  view full answer...
  
• Availability of Convert a Ball Ball Mount # AMSC10 and Hole Diameter for Ball Hole Platform
  Yes, we still offer the Convert-A-Ball Ball Mount # AMSC10 that you referenced. The ball hole diameter is 1 inch. For a 2 inch ball you'd want the part # 40038 or for a 2-5/16 inch ball you'd want part # C40007.
  view full answer...
• Best Fixed Ball Mount Option for Motorhome and Tow Dolly Compatibility with 10-11 Inch Drop
  The Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs # 80248 will bring your hitch height to 14 or 15 inches to match your tow dolly. The ball mount is rated for up to 5,000 lbs n the drop position so you simply need to use a hitch ball rated for 3,750 lbs or more. I recommend the 2 inch ball # 63845 or the 2-5/16 inch ball # 63847 depending on which matches your coupler. Both are rated for 7,500 lbs so they will work well. The Convert-A-Ball Ball Mount...
  view full answer...
  
• Towing Capacity of Fixed Ball Mounts
  The Convert-A-Ball Ball Mount for 2" hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs item # AMSC10 that was previously referenced is a superior hitch to the Brophy 10" drop item # BM10. It is a stronger reinforced hitch that has a higher weight capacity of 8,000 lbs over the Brophy which only has a 7,500 lbs limit. The use of the Convert-A-Ball fixed mount item # AMSC10 will not reduce your vehicle, hitch, or hitch balls towing capacity. For a fixed ball mount with a 5" rise I recommend the...
  view full answer...
• Adjustable Ball Mount with Long Shank for 2" Ball Mount with 8" Rise
  To answer your question first- Yes. You are able to use the Blue Ox Sway Pro Weight Distribution Shank # BXW4003 as a standard rise/drop ball mount. To make it a complete towing setup, you need to add the Ball Mount Adapter # BA-1 , which works with shanks that have 1-1/4" adjustment increments. Using this setup will give you around 14" of distance from the center of the hitch pin hole to the center of the hitch ball. The other option, which would be a more economical choice if you don't...
  view full answer...
  
• Recommended Ball Mount with Best Ground Clearance and 10 Inch Drop
  The Fastway Flash E Series HD Adjustable Ball Mount # FA42-00-2925 referenced in your question has a distance of 16 inches from the top of the shank to the bottom of the unused hitch ball when set at its lowest position. This will certainly provide some ground clearance issues on your Silverado when going down the driveway. If you are needing a 10 inch drop, a better option as it relates to ground clearance might be to go with a standard ball mount like the Convert-A-Ball # AMSC10. This...
  view full answer...
  
• Determining Trailer Hitch Ball Mount Rise Needed for Trailer Compatibility
  The Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs # AMSC10 you referenced measures the rise from the inside top of the receiver to the top of the hitch ball platform not the top of the hitch ball itself because the coupler fits over it. I've attached an article to assist. Use the article to help you with official measurements. Based on what you describe it sounds like you may need a 4 inch rise if I understand your measurements. I've linked the page to...
  view full answer...
• Gen-Y Shock Absorbing Ball Mount Orientation and Compatibility
  There is a correction for the Gen-Y Glyder Shock Absorbing Ball Mount # 325-GH-12005. It is only capable of being mounted in the drop position. To get the rise you are looking for in a shock absorbing style hitch I recommend the Convert-A-Ball Ball Mount # AMSC10. This allows for 8-3/4"" or rise and 10" drop.
  view full answer...
• Hitch and Ball Mount Solution for 2012 Audi A4 for 8-1/2 inch Rise
  The issue with Class I hitches like the Curt you have installed on your 2012 Audi A4 is that you can only use the recommended ball mount since it's a lower capacity hitch. Since you have a Curt hitch that's Class I you'd have to use the # C45521 which only has a rise of 2-5/8 inches. There's a 2 inch hitch that fits your 2012 Audi A4 with the EcoHitch part # 306-X7324 which would allow you to use a ball mount with a rise close to what you need like with the # AMSC10 which has an 8-3/4...
  view full answer...
• Distance from hitch Pin Hole Center to Ball Hole Center on Ball Mount # AMSC10
  I went out to the warehouse and pulled a Cushioned Ball Mount, # AMSC10, to measure. From the center of the hitch pin hole to the center of the ball hole measures 11-1/2 inches. I have included a link to our FAQ article on choosing the correct ball mount for you to view. The Draw-Tite Trailer Hitch, # 75579, is the most popular model for a 2008 Dodge Grand Caravan. I have included a link to the installation details and a link to a video showing a typical installation for you to view. For...
  view full answer...
  
• Distance from Trailer Hitch Pin Hole to Back of Ball Mount Drop on Cushioned Ball Mount AMSC10
  On the Convert-a-Ball cushioned ball mount # AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show this.
  view full answer...
  
• Availability of 2-Inch Ball Mount with 10-Inches of Drop
  For a 2-inch ball mount with 10-inches of drop you can refer to the linked page which displays fixed ball mounts like # AMSC10, which offers 10-inches of drop or 8-3/4-inches of rise. This ball mount measures 11-1/2-inches from the hitch pin hole to the ball hole. For a similar adjustable ball mount with 10-inches of maximum drop you might prefer Convert-a-Ball # TK5007 which provides 13-inches from the hitch pin hole to the ball hole. A second link to adjustable ball mounts is provided...
  view full answer...
• Hitch Ball Height of Stealth SH87FR Hitch Installed on 2019 Volvo XC90
  The receiver included with the Stealth # SH87FR hitch for the 2019 Volvo XC60 isn't meant for towing, it's meant for hitch mounted accessories like bike racks or cargo carriers. In order to tow, you'll need the # SH87FRT hitch kit which includes the ball mount that's meant for towing which provides a 2 inch rise which will place the top of the trailer ball around 18 inches which wouldn't be sufficient to tow your trailer so it's level. Unfortunately, this height isn't adjustable. I'd recommend...
  view full answer...
• Adjustable Ball Mount to Allow Motor Home to Pull Vehicle on a Tow Dolly
  It sounds like by "hitch" you mean a ball mount with 10-inches of height drop. The part you referenced, Roadmaster High-Low Hitch Adapter # RM-048-10, does provide this amount of drop but is intended only for applications that use tow bars to flat tow a vehicle. It is not suitable for use with a hitch-mount tow dolly like the Roadmaster # RM-2050-1, if that is what you have. We do offer a fixed ball mount from Convert-A-Ball Ball, their # AMSC10, that provides 10-inches of drop (or 8-3/4-inches...
  view full answer...
• Can Reese Sway-Control Bracket, # RP26003, be Used on a Ball Mount in the Rise Position
  You can use the Reese Sway-Control Bracket, # RP26003, with the Convert-A-Ball ball mount # AMSC10 in the rise position. The hitch ball holds the bracket in place.
  view full answer...
• How to Pick Out Correct Rise/Drop Ball Mount
  To pick out the correct rise/drop ball mount you need to take two measurements. Measure from the top of the hitch opening to the ground and then from bottom lip of trailer coupler to the ground and compute difference. The number you get is the amount of drop needed. Based on the dimension you listed I'd be inclined to thing you'd need a drop of around 10 inches or so like # AMSC10 since a lot of trailers sit around 16 inches from ground. I attached a help article on picking out ball mounts...
  view full answer...
• Recommendation For 10 Inch Drop Ball Mount For Towing Dolly And Bike Rack For RV
  The Convert-A-Ball Ball Mount With 10 inch Drop, Item # AMSC10, should work well for you. It has an overall shank length of 15-1/2 inches. A key measurement for your project will also be from center of hitch pin hole to nearest part of the drop which is approximately 4-1/4 inches (see picture). This amount can vary slightly depending on the welds. I called the manufacturer and the Swagman Traveler Rack, Item # S64664, might work with the Convert-A-Ball Mount but you must have at least...
  view full answer...
  
• What is the Rise of Convert-A-Ball Ball Mount # AMSC10
  Because there isn't an 8-3/4 inch rise category for ball mounts the Convert-A-Ball mount # AMSC10 is lumped into the 9 inch rise category. The actual rise is 8-3/4 inches. In the grand scheme of things that 1/4 inch difference isn't going to cause you any problems and the trailer will be more level than most other setups I have seen. If exactly 9 inches is required your best option is adjustable ball mount # FA42-00-2800 which has a maximum rise of 9 inches. I have linked a video review...
  view full answer...
• What Size Hitch Ball Does the Cushioned Ball Mount for 2 Inch Hitches # AMSC10 Use
  The Cushioned Ball Mount for 2 inch Hitches with 8-3/4 Inch Rise or 10 Inch Drop, # AMSC10, uses a hitch ball with a shank diameter of 1 inch. For a 2 inch hitch ball you will need part # 63845 and for a 1-7/8 inch hitch ball you will need # 19260. Since the Cushioned Ball Mount, # AMSC10, has a ball hole diameter of 1 inch, a hitch ball with a 1-1/4 inch shank will not work.
  view full answer...
• Recommended Trailer Hitch Ball Mount for 9 Inch Drop To Level Coupler Height
  It sounds like you want a fixed style ball mount. For that, I recommend the Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs # AMSC10. This will give you the drop needed plus a little to allow the trailer to sit slightly forward instead of slightly raised which allows for better tracking and sway control than the latter. This also has a built in cushion for comfort. You will also need the 2-5/16" Hitch Ball # C40007 or # 40038. If you want the level towing...
  view full answer...
• Will a Cushioned Ball Mount Work with Surge Trailer Brakes
  The cushion inside of the Convert-A-Ball cushioned ball mount # AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it gets. It would take more force to compress that cushion than to actuate the surge coupler. Cushioned ball mount # AMSC4 has a 2-3/4 inch rise or 4 inch drop but there are other options if you need a different rise or drop to tow the trailer level: #...
  view full answer...
• Ball Mount for EcoHitch of 2016 Subaru Crosstrek Towing Rental Trailer
  For a ball mount to use with your EcoHitch # 306-X7203 installed on our 2016 Subaru Crosstrek that would have it's hitch height at roughly 16-1/2 inches from the ground you'd need a rise of 8-1/2 inches roughly if the 25 inch dimension U-Haul gave you would give you a level trailer ride height. That does seem like a high figure but if that's what they gave you I'd assume it's best number to go off. So based on that you'd want a ball mount like the part # AMSC10. Then for a 2 inch ball...
  view full answer...
• Can Roadmaster High-Low Hitch Adapter # RM-048-10 be Used When Towing Car Dolly
  If you are looking to lower the hitch height of your tow vehicle by 10" in order to tow your 2015 Hyundai Elantra with a tow dolly, I recommend taking a look at the Cushioned Ball Mount for 2" Hitches, # AMSC10. This ball mount was designed with towing in mind and offers a tongue weight capacity of 2,000 lbs and a towing capacity of 10,000 lbs. The Roadmaster High-Low Hitch Adapter, # RM-048-10, was designed for use with tow bars and is not for use with any style of trailer or car dolly. The...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?