To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.
Features:
Specs:
Heavy loads can cause the back of your vehicle to sag and add unnecessary stress to your suspension. This stress not only affects your brakes in a bad way, but your tires, headlight aim and handling suffer as well. To improve your vehicle's ability to endure heavy loads, you need to add support to your existing coil springs.
Air Lift's AirLift 1000 adjustable air springs have 1,000 pounds of load-leveling capacity and are made specifically to fit inside your rear coil spring suspension for additional load assistance. You can inflate and deflate these tough, molded polyurethane helper springs as needed, ensuring the perfect amount of support for every load, every time. Easily level your vehicle front to rear, and if you run dual air lines to the air springs at installation, then you can inflate the springs independently of one another for side-to-side leveling. AirLift 1000 is a breeze to install with standard tools and comes with an easy-to-follow instruction manual.
AirLift 1000 comes with manual inflation valves that are typically mounted on the bumper but can be installed anywhere on your vehicle for easy access. For even more convenience and control, you can add a compressor and gauge system (sold separately), which will let you monitor and automatically inflate your air springs.
Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.
Air Lift is positive that you will benefit from their air spring suspension system - so much so that they offer a 60-day satisfaction guarantee. Install and use AirLift 1000 springs for 60 days, and if you are not satisfied at the end of this time, you can remove them from your vehicle and return them for a full product refund.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Connor: Hey guys, how's it going Connor, today, here at etrailer.com. We're going to be taking a look at the Air Lift 1000 Air Helper Springs. In order to give you a better idea of the benefits that our airbags are going to offer here for our vehicle, what we're going to do is, we're going to take some measurements. We're going to measure the stock suspension unloaded from the ground to the center of the wheel well here. Then we're going to hook up a trailer.We have a medium to small boat trailer here, which would be perfect for this Grand Cherokee that we have in particular. We're going to couple the trailer and we're going to see how much the stock suspension sags.
What we're going to do is, we're going to take that measurement and then we're going to fill the air bags that we have installed to see how much that's going to raise back to our factory suspension and our stock ride height.What we're going to go ahead and do here is measure from the ground. Keep in mind your results may vary depending on what tow vehicle you have. We're just using this as reference, a guide to show you. While our vehicle is unloaded and we're detached from the trailer, we're going to measure from the ground to the top center inside of our wheel well, 34 and a half inches. We're going to go to the front, take the same measurement.In the front, we're about right at 33 inches, so we have about an inch and a half difference.
Now we're going to go ahead and couple the trailer and retake these same measurements. From the ground to the top center of the wheel well is going to be about 33 and a half inches. Therefore, we dropped about an inch in the rear. From the ground to the top center of the wheel well again in the front, is going to be about 33 and a half inches. Overall, we went down an inch in the rear and we came up about a half an inch in the front.Offhand, these measurements may not seem like a lot to you, but you'd be surprised at what sort of effects this could have on your vehicle while you're out driving around.
Number one, our suspension in the front is obviously raised a little bit, this is going to mean a couple of different things. Number one, we're not going to have nearly as much stopping power, because we don't have as much weight on the front axle.Now in modern vehicles, say, about 60% of our stopping power is going to be on the front axle. When we take weight off that front axle, we're going to decrease our stopping power. In addition to the reduced stopping power, the raised front end is going to do a couple other things. It's going to point our headlights more towards the sky, which is going to reduce our visibility of the road and finally, last but not least, we're going to have some tire wear issues because the camber of our front tires is not correct with the weight lifted off of them.Therefore, we're going to have to replace our tires sooner because they're going to wear unevenly.
By putting more of a strain on the rear of our vehicle, our existing suspension components are going to wear out faster. We could experience a harsher ride and overall the tow vehicle won't feel as stable than it would unloaded. Now we're going to go ahead and put some air in our air springs, retake our measurements so we can show you the difference. Now we have our airbags filled, we have our trailer re-coupled, let's go ahead and take our same measurements that we took earlier.From the ground to the top inside edge of the wheel well, it looks we're about 34 and a quarter, not quite to 34 and a half inches, so we're about a quarter inch away from our factory ride height here at the rear. Let's go up to the front of the vehicle. If you remember, our factory ride height here with the trailer attached and our stock suspension was at 33 inches at the front, and we are back at 33 inches. We've actually came back to the factory ride height here at the front of the vehicle.Since we're back at the factory ride height or very close to it now, we're not going to have to worry about some of the issues we mentioned earlier about the headlight aim, the tire wear issues, or the decreased suspension longevity. Now that we've given you a visual of some of the measurements in the factory ride height, we went ahead and decreased all the air in the airbags again to the minimum five PSI pressure, and now we're going to take the vehicle on our two test courses we have at etrailer, the slalom course and the speed bump course.We're going to try to show you a representation of the ride quality when we have a load present with the airbags inflated and a load present without the airbags inflated. What we're going to do is, we have a couple of coolers in our hatch area here, not a terrible amount of weight, but enough to know it's back there. We're just taking our vehicle out on our test course now. As we can tell, without the airbags inflated, we are a little bouncy going over these speed bumps, as you would expect though.Yeah, it does feel like the vehicle is shifting around just a tiny bit side to side. Our steering isn't quite as responsive as it normally is. Now we're going to do some invasive maneuvers on our slalom course. Keep in mind it is wet here, so we are going to keep our speeds rather low. Again, we have a couple coolers in the hatch area here with our airbags deflated. Again, we can notice just a slight to slide rocking, more of a body roll if you will, while we're making these sharp turns here. I'm going to turn around, go the other way.Again, nothing real, real drastic, but we do sort of notice it a little bit, or at least I can anyhow. Yeah, a little bit of body roll, side to side. Now we go ahead, we went ahead and inflated our air springs. We put around 20 to 30 PSI in there and now we're going to leave the gear and the coolers in the back hatch here. We're going to go ahead and take our vehicle through our test course again, starting with our speed bump course.The suspension definitely feels a little bit firmer, but I don't feel as much body roll as we had the first time around. There's not as much jolting side to side. The steering is a little bit more responsive. Again, not a drastic, huge difference, but a minimal difference that we can still notice. Now let's go ahead and head on over to the slalom course and see the improvements over there. Now we're at the slalom course here. We're going to make some invasive maneuvers at speed, try to remain consistent with the speed of our initial run.I am noticing the steering's being a little bit more responsive. The weight is also not shifting around as much side to side, therefore we don't have as much body roll. These results are going to be the same whether we have heavy cargo in the rear of our hatch here or we're towing a trailer. The biggest difference I would have to say is just the weight transfer from side to side isn't severe with our airbags installed and inflated, therefore we don't have as much body roll.I would say that is probably the biggest takeaway of these Air Lift Air Springs here. Now they're going to help us do two things. They're going to help us, one, if we're towing a heavy load, number two, they're going to help us if we're hauling a heavy load. However, the stock suspension isn't necessarily designed to max out the payload or to max out our trailer weight ratings every time it's on the road, so that's where our suspension enhancements come into place.Again, they're going to do an excellent job helping to stabilize the heavy load, so we don't have that uneven, that harsh ride quality we would if we we're maxing out the factory suspension. Although there aren't any other options for this vehicle, I actually prefer airbags because the main reason is they're adjustable. What this means is, we can adjust the pressure inside the airbags, so we get the perfect level of support and comfort for any given load we may have at a time.The Air Lift Air Helper Springs can be installed in one of two ways, we can install them as a single pass system, which essentially means that we're going to have one inflation port, which is going to inflate both airbags. Now this is going to be the most common setup and what I recommend using. However, there is another option as well, called a Dual Path System Install. Essentially this means we're going to have two inflation ports, one to each of the air bags, so we can adjust the air bags.We can adjust the PSI in each airbag's different, so we have different amount of PSI and that's essentially going to be good for trailers if they're heavier on one side or we have more cargo in one side of the vehicle than the other. Our Air Lift Air Helper Springs here are going to have a 1000 pound weight capacity. However, keep in mind this isn't going to increase either the payload or the towing capacity of our Jeep.In regards to the fill rating of our airbags, this can be anywhere from five PSI, which is the minimum to 30 PSI, which is a maximum. However, again, the major feature, the major draw of airbags is that you can adjust the pressure for any given load you may have. Just make sure it never falls below five PSI or above 30 PSI. We need to keep in mind that with our air lift airbags, we are going to require access to an external air compressor in order to inflate the airbags.Now, if you're only going to be using the airbags every so often, then we can probably just suffice with finding an external air compressor, like at a gas station. However, if you find yourself to be towing or hauling heavy loads frequently, it's definitely going to benefit you to consider an onboard air compressor, like this Air Lift Wireless Bluetooth Air Compressor that we have here. This is actually going to be an excellent option for this vehicle because we don't have to run any airlines or wires into the cab, and the compressor is sized appropriately for our air springs. Now that we've showed you some of the benefits and features of our air springs here, that's going to do it today for the look at our Air Lift 1000 Air Helper Springs.
Average Customer Rating: 4.7 out of 5 stars (1184 Customer Reviews)
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.After my AIR LIFT 1000came in and laid everything out to inspect . wow this goes in the coil springs! after reading instructions it was a little tricky folding the bladder into hotdog bun and sliding into coil spring. the second coil spring was better. that being said, got it aired up to 35 psi and hooked up my tear drop trailer and was totally satisfied with the way my Murano handle the towing . ( 2020 Nissan Murano awd ) pulled teardrop with no swaying and car rode level. after trip I lowered the PSI to 5 -7 lbs. Air Lift 1000 perfect
These seem to work really well so far, can't speak to longevity yet, but they appear to be a well made air bladder.. Installation wasn't too bad, once I figured out the easiest way to get them between the coils. They definitely have improved load carrying capacity especially when pulling my motorcycle trailer.
David
12/17/2021
Very happy with these air springs, set the pressure and ride height when I first installed them, and a year later no change in the ride height an zero pressure loss. I haul a trailer at with it at least once a week and they work perfectly.
Easy install. Gives my Murano a firmer ride. Less bouncing when towing.
These air springs are one of the best investments you can make if you have a 4XE Wrangler. The battery pack is so heavy, I am finding after a couple of years the factory springs are getting too spongy and the body lean is more noticeable on the road especially cornering. Plus when you go over larger bumps the body sway is much more noticeable. I looked into an air spring set up but did not really want to spend several thousand dollars and I was surprised when I came across this set for under $[XX]. I was sceptical but thought, why not. They arrived in a small box and I was even more doubtful but when I opened it and took out the kit, I was impressed with the quality of the materials. I followed the instructions (with a few exceptions) and found them to be very easy to install. If you take your time with routing the air lines over the factory heat shields and carefully bring them to the rear drivers side, you can install them using the t connector. You can drill a hole through the thin part of the bumper right beside the license plate. There is just enough air line included to do this. The Schrader valve seats perfectly and makes it very convenient to add or bleed air from the system with only one adjustment. I set the springs at 12 psi and coupled with my after market adjustable shocks, I can make my Wrangler so smooth it feels more like a European SUV than a Jeep. Excellent product.
I added this kit to my 2005 Chevy Tahoe Z71 last year (2023). This kit was exactly what I needed to compliment my already installed, upgraded Bilstein shocks to help me tow a Camaro on a car hauler trailer from Colorado to Florida. I kept the bags inflated to 30-35psi the entire trip. I experienced no bag leakage, sag, sway, or bounce while towing. After the haul to Florida, I have kept the bags/kit in place with the bags regularly kept at 5-10psi. This has stiffened up the rear end nicely (not too much) as a daily driver hauling kids, sports equipment, tools, etc. without any issues. Intial install took about 2 hours as the most difficult part was feeding each bag through/inside the rear coil springs and making sure of no pinch points on the bags. I would recommend this kit as the materials, instructions and support from etrailer with videos, pics, and reviews (if needed), are top notch! Thank you etrailer!
They work great. I’ve used them to align my boat, a utility trailer and the wheelchair carrier for my wife. Has improved the ride and gas mileage by making the combinations more aero Dynamic. I would purchase again and recommend them to others
Very nice product so far. Installed on a 2011 Toyota Sienna van that has been converted to a rear entry wheelchair van. The airbags allowed for that extra stiffness needed to compensate for the added weight of the wheelchair. Ride quality did not suffer at all, and in fact, felt better with less sway. Hopefully it will last for a long time, but so far, we are very happy with it.
Product arrived promptly. Very simple idea, but absolutely difficult as H&¿¿to install. Trying to squeeze the folded air bag between the coil Springs was an absolute nightmare. Maybe some springs on some vehicles have a larger spacing between the coil,but a 2019 Kia Sorento does not. It took almost 6hrs to install both sides. One trick that did help was to use a little silicone spray on the air bag where it was jammed into the coil spring. This helped make the bag slippery so it passed between the coil spring. Just don't get it all over the air bag or it will be too slippery to hold onto as you push it into place. The hose clamps are really a poor design, awkward to squeeze with pliers as you position them into place. So far bags appear to be holding air pressure. Time will tell has to how durable and dependable they will be.I installed them to assist with towing my camper and help reduce the squatting when towing.
Air lift 1000 installed in my 2016 Toyota sequoia. Installation went smooth and was easy to install. I have the bags set to 15psi now for daily driving. Will monitor it for a a couple weeks and see if there is any leaks.
Installation was a breeze - of course after putting the truck on a frame lift and taking off the tires and wheel wells. Long enough line to run it to the bumper and really easy to fill. Impressive!
Very helpful and very Happy with this air lift kit ,I did put 100 miles and fit my set-up for a rav4 2009 and pop-up c for 1,700 pounds camper .Thanks
2017 Toyota Sienna van, very helpful for heavy loads and load balancing when pulling 13’ fiberglass and 19’ popup campers. Have used these for years on several different vehicles and have never been disappointed.
Reviewing the Air Lift 1000 kit 60860 for Kia/Hyundai SUV
Installed in a 2017 KIA Sorento LX. Like many other reviews claim, this was not easy to install although the factory video makes it look so, so simple. I followed the instructions for the first bag, it took me 2 and ½ hours to get it inside the spring coil. I used an exacto knife for cutting the hole, which worked very well. Not having a spoon type tire iron, I eventually settled on the handle of a large crescent wrench. After inserting the bag ½ way in, using the wrench to push on the part already in the spring brought the rest of the bag further in. Eventually I finally got the first bag inserted although it was twisted. Inflating the bag straightened it out. Starting on the second bag, I noticed it was much more pliable. It had been sitting in the Florida sun for the past 2 ½ hours. I folded it down as instructed, then folded it in ½ lengthwise and used zip ties to secure it. After sitting in the hot sun for another hour while I hydrated, it only took me 10 minutes to get the 2nd bag inserted and needed no other tools to assist. Carefully snipped the zip ties off and it popped into place. Running the air lines was simple enough. The hose clamps are very fragile, be patient, be careful or they will break.
Overall I am quite pleased with the performance of the bags. They make a big difference in how the KIA rides when towing. They hold pressure and are easy to inflate & deflate. I use a bicycle tire pump as I have no need to modify the pressure in route and didn’t see the need to spend the money on a remote control inflation system.
These are difficult to install and failed to deflate after one use. What we found is that he air hoses above the air bags are just narrow enough to pass through protective rubber hole liners that are provided with the kit. The hose catches and kinks which then prevented the air bags from deflating. I had to have my mechanic dissemble the entire set up and customize the hole for the hose and add a custom liner for the hole to prevent the problem. The installation, plus modification cost me more than the cost of the airlift product. My mechanic had installed these types of air bags on several other vehicles. In fact, it was the mechanic who recommended a suspension airbag system for my Dodge Grand Caravan minivan after I attached a trailer hitch with cargo carrier. It's a great idea, but this product version is not designed for trouble-free use.
After a year it's been great. One thing I do remember is definitely have some extra hose clamps on hand. Only provided enough for each hose end and 2 of them were already brittle and snapped when first opened. Other than that no issues. I keep it on 5psi without added tongue weight, 25-30 with the bike or cargo hitch racks. Without it I'd sag a good 4-6 inches and only have about 2 to 3 inches of wheel clearance on my 2023 Pathfinder Rock Creek. With it aired up it only sags maybe an inch.
Installed this kit on our 08' sienna awd the day before a road trip. Install went fairly smooth. It did take a couple of attempts to get the air bags stuffed into the coil springs. Routed both airlines individually and mounted on lower bumper black trim just above the hitch. Held air at 35psi overnight, deflated to 25psi with cargo and hit the road. All seems well and the van handles better loaded.
Have to echo other positive reviews of this product. Makes the sienna even more versatile, and it is both affordable and a moderate diy project for shadetrees like me
Great bang for the buck and I had no problems installing myself along with new rear shocks. I had my doubts, but we just completed a 2 week trip fully loaded and towing our popup camper, and they still held 22 psi after all that (started with just under 30 psi so no real leaks!). Definitely improved the ride height and overall handing in all conditions.
Very easy to install , the best choice I could have made for towing 16ft 6000lb + trailer . Haven’t had to make additional adjustment since installed over a year ago
The system seems to work as expected. I carry a 250 lb scooter on a hitch carrier and it only squats the rear less than a half inch now. The bags are soooo hard to get in place. I ended up getting tire spoons and putting way more force on them than I expected. I am not crazy about the cheap plastic tee since all other fittings are brass. I suppose it will be easy enough to fix if it fails but just seems a bit cheap to me.
I did not like them. The Exploded on me while on the road. customer service was good and sent a replacement .
Package arrived damaged,no parts missing or damaged, can't comment on product not installed at this time.
Jim
Getting the tubing completely over the plastic barbed tee fittings is difficult at best without damaging the fittings. The bags will not hold pressure for more than a day. The metal barded fittings are much easier to use & get the tube seated properly. Recommend NOT using the plastic tee fittings.
Getting the bags inside the springs is a test of patience, flexibility, hand & arm strength within a confined area. This is not a quick installation AND make sure you're in the shade because you'll be sweating enough without the help of the sun.
Once everything was installed & inflated, the ride without the trailer was noticeably better & with the trailer, the bag end sag was completely eliminated. FYI, the ride of the KIA without the air bags & trailer is already very nice.
its been a year of using the lift kit on the Jeep Wrangler Rubi (4door). no issues. did replace the clips with tighter fitting clips.
not much else to say. works as advertised.
They didn’t make much of a difference or any on my Toyota RAV4 Hybrid. I followed the instruction and put them on properly, they are just undersized or I got the wrong part number
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
8/24/2024
Hey Yall. After 5 more camping trips and the lift 1000 is still doing what I installed for. still working great