Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (46 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
I used these to replace odd-ball 5 on 5.5 hubs. I hate that bolt pattern. So hard to find good rims because hardly anyone uses them. In fact, I did this swap shortly after buying the trailer (read, tires and wheels were still in new condition). The dealer I bought them from was reluctant to give me much money for them. He told me that even he would have a hard time selling them because they were such an odd-ball bolt pattern. As he said this, I'm looking around at his lot of trailers, ALL with hubs with this same bolt patter. Ugh!
I wanted to upgrade the rims on my trailer, and upgrade the tires. So, went with this pattern (on two trailers). Quality product. Would def. buy again.
Could not have asked for anything better bearing being pressed in just a simple of installation as you could ask for I will always go back to etrailer.com for all my trailer needs
A good product delivered within 3 days. Will be able to have the trailer ready for the weekend fun!
Perfect replacement for the 16 yr old original hubs. Had both replaced in 15 minutes.
There's not much to say. It's a trailer hub. There are plenty of things to say about the customer service, which was great when I called in to make my order and make sure I was ordering to right part. The time of arrival at my doorstep was very quick. I thought I was going to have to order and forget about it until it arrived but not with e trailer; the order arrived within a few days. It was well packaged too.
Excellent idler hub assembly for an attractive price.
eTrailer support is amazing!
So on the last trailer I converted to hydraulic disc, I used the Titan kit with actuator. This trailer is a cargo trailer for work 14'X8' and not that heavy. I went with Kodiak discs and the Hydrastar actuator. I mounted it inside the trailer to protect it and keep it out of sight. It's so quiet but works flawlessly! Even with the door open, it's tough to hear, so for bleeding, I set up a remote switch to activate the system. It doesn't leak, has plenty of power, and is very smooth coupled with my factory Ford brake controller.. It's been a year, so long time reliability is a wait and see, but so far, I'm very happy.
Purchased several items from you, very happy with service and pricing! Wouldn’t have been able to build our off road camper with your help!
I was needing bearing, but wanted to change hubs to better style (from Mercedes style to regular stud style). It was only a little extra to do the whole hub. The pre-greased already put together hubs took about 10 mins per hub to change. Most of that was cleaning spindles for install. I really like this option. Super easy, quick fix.
Everything I ordered was correct. They kept me updated on the back order items suggested an alternative when the hubs gots delayed a second time. Went together great. Hoping this is the last axle and hubs I put on the trailer.
Excellent! Used these to convert from worn 4 bolt hubs with 15 inch tires to larger, higher weight capcity 16 inch commercial Transit van tires. Just towed a scrap auto to the recycler. Its like having a new trailer. Highly reccomended!+++
PRODUCT IS EXCELLENT QUALITY, EXACTLY WHAT I ORDERED AND NEEDED. SERVICE WAS FAST AND ALLOWED ME TO GET MY TRAILER BACK ON THE ROAD.
I WILL HIGHLY RECOMMEND ETRAILER.COM
They were a perfect fit to my timberland Axle-less system. A simple stud change and I was able to bolt up stock Toyota wheels to my new trailer.
It was the wrong ones. Other than having to buy spindles to fit and waiting STILL for machine shop to weld it, perfect, just perfect. Over a year and still can't use it.
Tiffany determined which hub that I needed with minimal information from me and she was right on the money. I’m very grateful.
Loved the personal service and the help. I tried a few other sources before going online to order from etrailer. One place I tried was an online tool dealer, and their online site was a mess without help and so was a retail location. etrailer, was quick to find me exactly what I needed and got me fixed up in just a few minutes. From now on all my trailer needs will be fulfilled from etrailer!!!
Great customer service. Fast shipping, detailed tracking, and the product was exactly as described.
Items were shipped promptly and arrived on time in good condition. Well packaged. Good quality products that will be a new utility trailer axle for me within the next week.
Look good so far haven't installed them yet but will update when they are done. Shipping has always been great, normally delivered this and my previous orders on time. Will be purchasing my future trailer needs again from your company.
Great product and qualified service customers and delivery. Thank you
As always, etrailer had the parts I needed, got them to me ahead of time expected, and the order was correct. Great job!
They came pre packed with grease and fit perfectly! Wow one of the easiest replacements I've used
Exactly what i needed. And ordered was shipped, packed, and delivered in great shape.
Perfect! Instant install, pregreased and good quality for a great price!
Excellent timing and customer service
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David C.
2/25/2018
These hubs work great. I got them because I wanted my trailer bolt pattern to match my Toyota Tacoma. It has worked out great so far.