bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
etrailer

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized

Part Number: AKIHUB-545-35-G-EZ-K
In Stock
$57.76
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized part number AKIHUB-545-35-G-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (302)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-G-EZ-K

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Easy Grease
  • EZ Lube
  • L44649
  • L68149
  • 1/2 Inch Stud
  • etrailer

Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.


Features:

  • Marine-grade trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Galvanized finish offers excellent corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-545-97 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube

Compare to Dexter 8-248-50UC1-EZ





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-35-G-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (302 Customer Reviews)

Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.

by:

The hub assemblies I bought worked fine for my trailer, thank you Martha O. I was a little disappointed that I didn't get American made products but overall the Chinese parts fit fine. The packing left a little to be desired, one dust cap was dented and I had to do some filing on it before I could hammer it in to place. One roller bearing casing was also dented a small amount but the bearing was still smooth so I went ahead with it. The parts did travel from Missouri to California and the box was pretty beat up. Maybe etrailer could double bag the parts? The box did get here in just a few days so they shipping was good. I would buy these parts again if I ever needed to.

Bill

7/6/2024

It’s been a year since I replaced my hubs and bearings and I’ve had no issues. I’ve probably used my boat over 30 times in the last year. I should think about re-greasing the bearings, it’s about time. Still happy with my purchase from etrailer.



by:

Perfect fit for my ‘99 tracker boat trailer once I did the tear down and confirmed the bearing/race and seal numbers. Manufacturer can’t even look it up by VIN if it’s 1999 or older models.



by:

I use these components on my boat trailer and they meet my expectations! The outer races are already pressed in and it takes minimal tools and time to complete the project! Highly recommend!



by:

I have purchased several items from Etrailer and have found everyone I talked with and the quality of product top notch. Your system and customer service is commendable. Keep up the good work!



by:

etrailer was very helpful. The hub that was sent turned out to be the wrong one for my trailer. A refund was promptly issued. The customer service was kind and helpful. I will definitely do business with etrailer again.



by:

I've ordered parts from etrailer before, and this order process was just as good!
The online catalogue is huge, yet easy to navigate and find what you need.
The order response and delivery is quick and fast!
Honestly, this is one of the best online shops that I've ever used.
Thanks



by:

The grease caps that came with the set does not fit the hub. It is bigger.

Etrailer Expert

Katrina D.

4/12/2024

I am sorry that these were not the right size. Let me get you over to customer service. They will be asking for your original grease seal numbers, please have those available when they reach out.



by:

I placed my order for hubs and bearing w Bay in customer service as I had a couple questions which she answered well. The package was shipped quickly. It arrived with one problem. I called Customer service and spoke with Kate who was very helpful and provided a solution and to replace a item. I was called later by Patrick the shipping lead who assured me the replacement was shipped and apologized for the error. Always excellent service at Etrailer. The only place i will shop for trailer parts.



by:

Couldn't be more satisfied! I change from 5 on 5 to 5 on 4.5. I've been rolling on these hubs about 2500 miles. Every time I jack up the trailer I spin the tire, smooth as ever. Thankx LSD

Lynes D.

9/20/2018

1 year - 35k miles Im still very happy with the set of idler and brake hubs, bearings are still rolling smooth. I only use 1 type of grease Lucas RedNTacky2, about every 1k miles pull the rubber plug, 1/2 pump of grease not too much or youll blow the seal! Most common problem people have! Ill be buying another set for the trailer Im building. Keep making people happy, Thankx LSD



by:

The team at etrailer helped me find the right parts for my trailer. They provided excellent customer service.



by:

I ordered on a Sunday to replace old 5x4.75 (uncommon size) hubs after discovering the new wheels and tires I ordered were 5x4.5 (common size) no I did not measure my old wheels. My old bearings were superseded by these bearings included in this kit. Assembly was a breeze. These were marked as shipped on SUNDAY! Thanks, you have my business.



by:

Perfect replacement 1377



by:

you put everything in the same box, Box was broke open from shipper package that contaned bearings ,races and seals beat to hell.
You could at least wrapped things to prevent damage.



by:

I've had the hubs on for one year of use and they have performed perfectly. The price was good and delivery was timely. I'm very satisfied.



by:

Parts fit well and assembled easy, price was very fair. This is the 3rd time I've bought products from etrailer and have been pleased every time.
Thanks

Donald

4/22/2021

Good



by:

Great price, quick shipping. Product perfect fit



by:

Ordered the hub and recipe it very quickly. They provided a video for reference on installation. It was very well made and easy to install. Very pleased with it, but the best part was the customer service. The old hub and bearings were so destroyed that I couldn’t get any numbers off of it. The lady from etrailer stayed on the phone and helped me research it until we found the right hub and bearings!!! In the end it was exactly what I needed and as happy as I am with the product, I’m more happy about the friendly and knowledgeable customer service they provided!!! Highly recommend the company and the products they sell!!!!



by:

Thank you for your assistance with my purchase of new hubs for my boat trailer. They are exactly as described and they fit perfectly on my trailer. I am attaching a few photo's of the hubs installed. I would recommend your company to everyone who needs hubs........EXCELLENT SERVICE.



by:

Perfect fit. Seems like great quality.



by:

Arrived as promised



by:

The , order window for this product did not show the bearing sizes, and they shipped me the hub with wrong bearings, so I had to return it. Looking over the item description a 2nd time, It was difficult to locate the bearing sizes. That feature should be very visible for customers to find, so that they don't order the wrong size bearings.



by:

Everything showed up perfectly



by:

Great product, arrived a day earlier than expected with the free shipping option. Will buy again from etrailer when it’s time to do it again.



by:

Delivery was pretty fast and they didn't mess up my order.



by:

I have always had good service with etrailer but this time it appeared my order was going to be two weeks out on delivery which would of hampered my vacation. I contacted Gwen at etrailer asking if she could look into the delayed shipment, she was very professional and extremely nice stating she would look into the product shipping early but there was no promises. I received my order two days later, hats off to Gwen for saving my vacation


25
302
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • How to Determine the Correct Replacement Hubs for a 1994 Bayliner Capri
    Really it's going to boil down to which spindle type your Bayliner Capri has. The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K will work with 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles and wheels that are 13" to 15" - while the Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-G-EZ-2K will work with 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles and wheels that are...
    view full answer...
    Image 1 for
  • Correct Replacement for TDE 46210 Trailer Hub
    There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500 lb axle so you can use the Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for galvanized or part # AKIHUB-545-35-K for standard.
    view full answer...
  • Replacement Idler Hub for Hub Stamped With TMW 46210 1209
    It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub # AKIHUB-545-35-G-K for standard spindles or the Easy Grease Hub # AKIHUB-545-35-G-EZ-K if your spindle has a grease zerk on the end of the spindle. The 1209 may be a date code or batch type number the manufacturer used to identify and changes in materials or processing.
    view full answer...
  • Option For 2,000 lb or 2,200 lb Axle-Less System For Boat Trailer
    While we have an option for 2,000 lb or 2,200 lb suspension, like you mentioned there is not a straight axle with the measurements you have. What you can do though is use an the Timbren Axle-Less Suspension System, which are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements. There are 2,000 lb and 2,200 lb systems: - 2,000 lbs: Timbren Axle-Less Trailer Suspension System # ASR2000S02 - 2,200 lbs: Timbren Axle-Less Trailer Suspension...
    view full answer...
  • What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?
    Thanks so much for providing those details! Based on your bearing numbers, you definitely have a 3.5k axle with a 5 on 4-1/2 lug pattern. For replacement hubs, I recommend the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have E-Z Lube or Easy Grease spindles) or the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K (if you have standard spindles). Both...
    view full answer...
  • What Bearing Buddy Fits The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K?
    The Bearing Buddy Bearing Protectors # BB1980A-SS are the correct replacement for the Cap # DC200L-DCRP included with our Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K.
    view full answer...
  • Replacement DeeMaxx Disc Brake Kit for a Boat Trailer with 3,500 lb Axle
    According to my research the DeeMaxx Disc Brake Kit # DE62FR will fit your axle just fine. You'll need to use an idler hub like the 3.5K # AKIHUB-545-35-G-EZ-K and swipe out the grease seal with one that has an appropriate inner and outer diameter # 168255TB (1.687" and 2.561" respectively). You'll want to double check this with what you currently have to make sure the bearings and seal dimensions match.
    view full answer...
  • Finding Correct Hubs For A Dual Axle Enclosed 8x16 Trailer With 3,500 lb Axles
    Hello again Patrick thanks for the pictures. Everything I can see indicates we are on the right track with the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized Item # AKIHUB-545-35-G-EZ-K being the correct hub. From the first picture we know it is indeed a 3,500 lb axle and it was made in 2010 (which is also a good sign). We also know that the grease cap flange diameter on the current hub is the same as that of the # AKIHUB-545-35-G-EZ-K hub at 1.99". Since...
    view full answer...
  • Replacing Hubs And Brakes On A Dual Axle Enclosed 8x16 Trailer
    Hey Patrick thanks for your question. If you want to do away with the brakes on your 8x16 dual axle trailer, you can simply remove the current hub/drums and the brake assemblies, and you can install idler hubs. There is nothing needed beyond that to fill any void. It will just be a process of swapping out the braking hubs for idler hubs. The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K that you were looking at is made for a 3,500 lb axle and uses the standard # L68149...
    view full answer...
  • Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
    Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub # AKIHUB-545-35-G-EZ-K with the Grease Seal # 168255TB used instead of the seal included with the hub. We currently do not carry a hub which includes this seal as it was only commonly used on older boat trailers.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommend Replacement Boat Trailer Hubs With Bearings L68149 And L44649
    We have something like the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized, part # AKIHUB-545-35-G-EZ-K. It is a marine grade 5 on 4-1/2 idler hub that comes with a grease cap. It comes with replacement bearings and seals. This is my recommendation for salt water use. The galvanization will protect the hubs from the salt water. The CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased, part # CE13511, you attached...
    view full answer...
  • Will 3,500 lb Kodiak Disc Brake Kit Fit 2012 EZ Loader Boat Trailer
    Hi Dave; the old Dexter DB-35 brakes are designed for 3,500 lb axles. I believe that was a hub/rotor disc brake kit so the Kodiak Disc # K2R35D will work for your trailer as long as you add a hub like # AKIHUB-545-35-G-EZ-K with a 5 on 4-1/2 bolt pattern and have wheels that are 14" or larger. You could also replace it using the # K2HR35D which has the full hub/rotor.
    view full answer...
  • Comparing etrailer and CE Smith Idler Hubs for a 3,500 lb Axle
    The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K and the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 fit the same spindle, have the same bolt pattern, and are galvanized so yes, essentially the only things that separate the 2 assemblies is that the CE Smith comes pre-greased and in a carrying case. If you choose to go with the etrailer option then you'll also need grease like part # L11380 to pack the bearings with. Attached are some videos for...
    view full answer...
  • Correct Hub and Bearing Buddy Replacement for UFP H-1377B
    The UFP H-1377B hubs you have are 3,500 lb axle hubs so for a replacement you could use the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part # AKIHUB-545-35-G-EZ-K which is a direct replacement. The correct Bearing Buddy would then be the part # BB1980A.
    view full answer...
  • Recommended Galvanized Trailer Idler Hub for Trailer with 3,500 Lb Axle
    Yes, we do have exactly what you're looking for in the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-G-K for standard or part # AKIHUB-545-35-G-EZ-K for easy grease which both have a galvanized finish. Furthermore, the kit comes with new wheel nuts as well so you'll have pretty much a new setup.
    view full answer...
  • What Bearing Kit and Idler Hub Fit a 2005 EZ Loader Boat Trailer With UFP H-1377 Idler Hubs?
    The UFP H-1377 is for a #84 spindle. This will use the Bearing Kit # BK2-100 or the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K if you wish to have a all new hub. I recommend using the Grease # L11390 with the bearings or hub. This grease works great in both hot and cold temps and is water insoluble so it will not absorb water.
    view full answer...
  • Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
    We do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and Trailer Idler Hub Assembly # AKIHUB-545-35-G-K available in a galvanized finish. Currently the Dexter 8-248 Idler Hub # 84545BX we only carry in the black finish. We also have the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 that is also galvanized or the Kodiak Trailer Hub # KH84545S made from stainless steel. The stainless will give you the best corrosion resistance of all the hubs. You...
    view full answer...
  • Replacement Hub for OnSpec Boat Trailer with 3,500 lb Axle
    Since your OnSpec Boat Trailer has a 3,500 lb axle the correct idler hub would be the part # AKIHUB-545-35-G-EZ-K that you referenced. Which comes with a dust cap that has a removable center plug for zerk fitting access, new bearings, lug nuts, and a seal. For a cotter pin you'd then need the part # 165649.
    view full answer...
  • How To Find Correct Replacement Hubs for Skeeter SX2250 Trailer
    I have a few options for you to help with identifying the correct hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the correct hubs. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for example is for 3,500 lb axles and uses L68149 and L44649 bearings. The other option would be to take the hubs off the trailer and either read...
    view full answer...
    Image 1 for Image 2 for
  • Availability of Trailer Hub for 3,500 lb Axle that has 5 on 4-1/2 inch Bolt Pattern
    The hub you referenced is not galvanized and we do not have any similar ones that are since that bolt pattern is a little unique.
    view full answer...
  • How to Pick Out Hub/Drums for 2015 22 foot Coachman APEX 215 RBK-1SL
    In order to pick out the correct hub/drum assembly for a trailer like your 2015 Coachman APEX 215 you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner...
    view full answer...
    Image 1 for
  • Replacement Idler Hub for 3,500 lb Square Axle with 5 on 4-1/2 Bolt Pattern
    The bearings on your trailer match a 3,500 lb axle and the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K, but your grease seal is significantly smaller as this hub uses a grease seal with a 1.719" inner diameter. If you can verify that your grease seal inner diameter needs to be 1.6275" then you're looking for a specialty-type hub replacement and you'll need to reach out to your local RV dealer or trailer shop to help you with that, otherwise the idler hub I mentioned...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Hubs for Timbren Axle-Less Suspension for Use in Salt Water Environment
    Timbren's axle-less trailer suspension systems like # ASR3500S05 are all made with a heavy powder coat finish but it is possible to select matching galvanized idler hubs like # AKIHUB-545-35-G-EZ-K or galvanized hub/drums like # 8-247-50UC3-EZ. Both fit the spindles on this Timbren kit and both have the 5-on-4-1/2 wheel bolt pattern. If you don't mind spending more we also have a stainless steel idler hub from Kodiak, part # KH84545S. All hubs that fit the Timbren kit appear on the linked...
    view full answer...
  • Replacement Hub Options For Trailer Hub Using L67048 Inner/Outer Bearings w/5 on 4-1/2 Bolt Pattern
    While we do have the Bearing # LM67048 and Race # LM67010 your hub uses, we do not have a hub for your axle. You can have the more common #84 Spindle # TRU74FR welded in place of your current spindle. This will allow you to use the more common Idler Hub # AKIHUB-545-35-G-EZ-K used on 3,500lbs axles. It will also accept Brakes # AKEBRK-35-SA and a Hub/Drum # AKHD-545-35-EZ-K if you will need brakes on your trailer.
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Video Edited:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.