bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 8 on 6-1/2 Inch
  4. For 7000 lbs Axles
  5. Hub with Integrated Drum
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
  9. 17-1/2 Inch Wheel
Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
etrailer

Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased

Part Number: AKHD-865-7-1-EZ-K
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$172.93
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased part number AKHD-865-7-1-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (20)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-7-1-EZ-K

  • 8 on 6-1/2 Inch
  • For 7000 lbs Axles
  • Hub with Integrated Drum
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • EZ Lube
  • Pre-Greased
  • 14125A
  • 9/16 Inch Stud
  • 25580
  • etrailer

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


Specs:

  • Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 12" diameter x 2-3/8" long
    • Works with 12" brake assembly
  • Bolt pattern: 8 on 6-1/2
  • Wheel studs: 9/16" diameter x 1-5/8 long
  • Grease cap flange diameter: 2.72"
  • Weight capacity: 3,500 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KBD2-865-39 AxleTek 12" Hub and Drum Assembly for 7,000-lb Axle with Hardware - 8 on 6-1/2 - EZ Lube - Pre Greased





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased - AKHD-865-7-1-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (20 Customer Reviews)

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.

by:

One arrived damaged during shipping, but Kate F shipped the replacement bearing right away. So 5 stars for customer service. 4 stars because the bearings in these are all made in china. For something so critical for safety and reliability as a bearing is, I would like TIMKEN USA made bearings in a big trailer carrying expensive equipment. I guess I should have read the product description better



by:

JUST REMOVE FROM THE BOX AND INSTALL ETRAILER HAS MADE IT THAT SIMPLE



by:

The hub assembly was an EXACT replacement for the OEM hub on my 5th wheel trailer. It was easily installed to replace the hub that failed. I was surprised at how quickly etrailer shipped the part and how fast it arrived at my home.

Lee profile picture

Lee

3/26/2019

Never had a problem with the replacement hub assembly. I worked perfectly up until we traded for a new 5th wheel in Sept. 2018.



by:

Great except that you sent me lug nuts that are too small for the studs.



by:

I needed new hub and wheel parts for a 7k lb axle on a large triaxle toyhauler. Michael H was very helpful answering questions and George J had the right parts to me quickly and efficiently. etrailer.com and their staff are excellent to work with.



by:

Perfect. Pre-greased was the way to go



by:

Only one of the 4 where delivered. Had to call to find out other are still in transit.



by:



by:

Great prices on quality products.



by:

Awesome customer support



by:



by:



by:



by:

Fast friendly service and the products are great. Thanks



by:



by:

Boxes were in great shape this time. Super glad about that!



by:



by:



by:



by:


20
20

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Max Torque Rating for 1/2" Studs on 7K Axle Hub and Drum Assembly
    For hubs that have 1/2" studs, like the Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles # AKHD-865-7-2-EZ-K you're looking at, you don't want to exceed 120 ft-lbs as that's the most torque this stud size can handle. Since you have 17-1/2" wheels I do recommend going all the way to 120 ft-lbs. If your wheels have a 9/16" stud (like most 17-1/2" wheels that fit with coned lug nuts do) I recommend going with the Hub and Drum Assembly # AKHD-865-7-1-EZ-K instead. This has the...
    view full answer...
  • Trailer Hub Options For Timbren Axle-Less Trailer Suspension # TASR7KS02
    With the Timbren Axle-Less Trailer Suspension # TASR7KS02 rated for a 7,000lb capacity you will want to use either 2 of the Idler Hubs # AKIHUB-865-7-2-EZ-K or Hub/Drums # AKHD-865-7-1-EZ-K. We do have the Brake Kit # AKEBRK-7-SA if you go with the drum brakes. Either of these will pair well with the Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel # KE39JR or Kenda Karrier ST235/85R16 Radial Trailer Tire with 16" Black Mod Wheel # AM32743B depending on the size tire you...
    view full answer...
  • Will The Free Backing Brakes AKFBBRK-7 Be Compatible With My Current Hubs/Drums?
    Hey Tom thanks for your questions. To answer your first question, yes, you can use the # AKFBBRK-7 or the # 23-342-343 free backing hydraulic brake assemblies on your dump trailer. All of these use the same standard 12" x 2" brake shoes. If you are trying to decide between the Dexter brand or our etrailer brand, personally I recommend etrailer brand # AKFBBRK-7. In my experience they are pretty much identical to the dexter brand but for a fraction of the cost. Were it my trailer, I would...
    view full answer...
  • Changing From 1/2 Wheel Studs To 9/16 For 8 on 6-1/2 Wheel Hub 7K Axel
    To use the Westlake 215/75R17.5 radial tire and wheel, # LHAS701 is an 8 on 6-1/2 it may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. I have added a link to a video review for you to check out as well as a link to our selection of 9/16" diameter, drive-in wheel studs. Otherwise, you will need to select another wheel/tire combo that uses the 1/2" wheel studs your...
    view full answer...
  • Recommended Brake Assemblies And Drum Assemblies For 7,000 lb Dexter Axles
    For your Dexter 7,000 lbs axles, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. These brake assemblies are side specific and are labeled for you. They are self adjusting after the initial adjustment at installation. We don't carry the spindles for your 7,000 lb axles, but we do have the hub and drum assemblies that will fit a traditional style spindle or an E-Z lube spindle with the 9/16 lug bolts. For a...
    view full answer...
  • Recommended Hub and Drum Assemblies and Brakes for 7,000 Pound Triple Axle Trailer
    To determine exactly which hubs you need you'll need to find your bearing numbers. Most likely you have # 25580 and # 14125A but verify to be sure. If these are correct you'll next want to find the diameter of your wheel studs and if you have E-Z Lube axles. If the studs are 9/16 inch use # AKHD-865-7-1-EZ-K for E-Z Lube axles and # AKHD-865-7-1-K for standard axles. For 1/2 inch studs instead use # AKHD-865-7-2-EZ-K for E-Z Lube or # AKHD-865-7-2-K for standard axles. Then you need...
    view full answer...
  • Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Inch Studs for 7,000 Pound EZ Lube Axles
    Trailer Hub and Drum Assembly with a 12 inch diameter with 8 on 6-1/2 bolt pattern, 9/16 inch studs, for EZ lube axles is part # AKHD-865-7-1-EZ-K. This hub and drum assembly fits 7,000 pound axles and using inner bearing 25580 and outer bearing 14125A. I have linked a video review for your you.
    view full answer...
  • Replacement Brakes and Hub/Drums for 7K Trailer Axles on 2005 Forrest River Cardinal 33LX
    Yes, to replace the brakes and hub/drums on your 7K axles you need the following: - Self-Adjusting Trailer Brakes # TRU96FR - Hub and Drum Assembly # AKHD-865-7-2-EZ-K (1/2" studs) - Hub and Drum Assembly # AKHD-865-7-1-EZ-K (9/16" studs) The brakes fit either way, you just need to choose the correct hub drums that match your current studs so it fits with your current equipment just fine. I've attached some isntallation videos for you to check out.
    view full answer...
  • Replacement Electric Trailer Brake Assemblies and Hubs For a Lippert 7,000LB Axle V000338732
    You will need the Right Electric Brake Assembly # TRU56FR and Trailer Hub and Drum Assembly # AKHD-865-7-1-EZ-K for your Lippert axle. The brake assembly is self adjusting like your factory brakes and the hub/drum assembly comes pre loaded with all the correct bearings and grease seal. We do have the Left Electric Brake Assembly # TRU29FR if you want to replace it at the same time to ensure they wear evenly.
    view full answer...
    Image 1 for
  • Correct Replacement for AL-KO 568182 or Hayes 09089324
    The correct replacement we offer for an AL-KO 568182 or Hayes 09089324 is the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K which will work with the EZ-Lube Spindles (Dexter) and UltraLube (AL-KO). I can confirm the above will fit an AL-KO H60 Axle. I unfortunately don't have any reference to the Titan part number you listed.
    view full answer...
  • Replacement Hub and Drum Assembly For Axletek BD-865-37 Trailer Hub
    The Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-1-EZ-K matches the specs for your Axletek BD-865-37 hub. This hub has an 8 on 6-1/2" bolt pattern with 9/16" lug nuts and studs. It uses the Inner Bearing # 25580 and Outer Bearing # 14125A with a 2.25" inner diameter Grease Seal # GS-2250DL. If you are also needing brake assemblies, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465. These are self adjusting brakes that will ensure you have a more consistent...
    view full answer...
  • Wheel Stud Spline Diameter For The etrailer Easy Grease Trailer Hub and Drum Assembly
    Hey Neil, I pulled a wheel stud from the Easy Grease Trailer Hub and Drum Assembly for 7K Axles # AKHD-865-7-1-EZ-K and found that the spline diameter was 0.5675". It looks like we don't currently offer a replacement wheel stud with these same dimensions.
    view full answer...
  • Replacement EZ-Lube Grease Cap and Rubber Plug
    It sounds like you need an EZ-Lube type grease cap and rubber plug for your trailer hub. We have these EZ-Lube grease caps in several sizes to fit a range of hubs. All are shown on the linked page. All you need to do is measure your hub's inside bore diameter to choose the correct matching grease cap. Part # RG04-040 fits a hub bore of 1.99-inches. Part # RG04-080 fits a hub bore of 2.44-inches. Part # RG04-120 fits a hub bore of 2.72-inches. This is the size that fits the hub you...
    view full answer...
  • Is Pre-Greased Easy Grease Trailer Hub Compatible with LMX Red Grease
    Yes, the grease that is in the Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-1-EZ-K is compatible with LMX Red grease like the part # L11390 as it is Lithium Complex grease which is the same as the LMX Red grease.
    view full answer...
  • How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
    The only difference between the Dexter 7K hubs and hub and drum assemblies that have either 1/2 inch studs or 9/16 inch studs are the studs themselves. Otherwise they are exactly the same. You can use calipers such as # PTW80157 to measure the diameter of the studs you have. Or you can check the hubs you have for any numbers stamped into them. If you see a 219-04 or 219-09 then it has 1/2 inch studs. If you see a 219-13 or 219-18 they are 1/2 inch. It is also possible that this information...
    view full answer...
  • Best Way to Grease Trailer Hub that Has EZ Lube Spindles
    Here's the process on pumping grease into a hub that has EZ lube spindles. But please be careful not to overfill the hub as it's easy to do and will blow out the grease seal. First, grease your bearings and spindle by hand or with a bearing packer like part # L70025. If you are going to do it by hand, start with a gob of grease in your palm and then press the bearing into the grease with some force. Next, insert your bearings and grease seal in the hub and mount your hub on your spindle....
    view full answer...
  • What Wheel Studs Does 7k Trailer Hub # AKHD-865-7-1-EZ-K Use
    We do not have a version of the trailer hub # AKHD-865-7-1-EZ-K with longer wheel studs but the replacements are # 7-257 which you can check out to see what specs you'd need to get longer ones. The spline diameter is .689 and .31 of an inch long.
    view full answer...
  • How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
    In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll need the Trailer Hub and Drum Assembly part # AKHD-865-7-1-K for standard or part # AKHD-865-7-1-EZ-K for EZ-Lube. Then, you can use a 17.5" diameter trailer wheel like the Aluminum Lynx Trailer Wheel part # 274-000006. I have attached a full list of wheel options...
    view full answer...
  • How To Upgrade from 6-Lug to 8-Lug Hubs On a 7K Axle
    In order to swap from 6-lug hubs to 8-lug hubs on a 7K axle you simply need new hubs, the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K. The Electric Trailer Brake Kit part # AKEBRK-6 can then be used to add brakes to the un-braked axle. It is not very common to have 6-lug hubs on a 7K axle so this will be a great option for better parts compatibility.
    view full answer...
  • Replacement Hub And Drum Assembly For An 8 Lug Hub With 9/16" Studs
    I am happy to help point you in the right direction. With the information you provided we can certainly narrow it down. I will say that I could not find any references for the part number 030120 that you provided. So we will need to look at a few things in order to determine fitment. All of the 8 lug hub/drums with 9/16" studs that we carry are rated for either 7,000 or 8,000 lb axles. So confirming the axle capacity would help to narrow down which hub you will need. Generally we also...
    view full answer...
  • Option to Replace 7,000 lb Axle & Hubs With 8 on 6-1/2" Bolt Pattern
    We do not have an axle with those capacities, the best we can offer is the 7,000 lb Timbren Axle-Less Trailer Suspension # TASR7KS01. You could then use the Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-1-EZ-K.
    view full answer...
  • How To Find Correct Replacement Hub/Drum for Jayco Eagle
    In order to find the correct replacement hub/drum assembly for a trailer you'll need to know the axle capacity which can be found on the axle tag in the center of the axle. The two most common are 3,500 lb and 5,200 lb. The correct replacement for a 3,500 lb is the Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K and the correct replacement for a 5,200 lb - 6,000 lb is the Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K. We also offer the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K...
    view full answer...
  • Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound Axles
    The size socket used isn't necessarily going to be the same as the nut or stud thread size. It is usually larger since the outer width of a hex head is larger than the threaded diameter. Hub and drum assembly # 8-219-13UC3 for 5,200 to 7,000 pound axles does indeed have a stud diameter of 9/16 and would take 9/16 inch lug nuts. We also have the similar etrailer model, # AKHD-865-7-1-EZ-K, that also has 9/16 inch studs. Both it and the above assembly are for EZ Lube axles. If your axles...
    view full answer...
  • Recommended EZ Lube Hubs For 7000 lb Capacity Axle 8 Bolts With 5/8 Inch Wheel Studs
    For a 5/8 inch stud option without the EZ Lube, I recommend the Dexter Axle Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 8-219-18UC3. This will have the grease cap and not the EZ Lube. However, you can add the EZ lube grease caps with plug that will fit, they are # RG04-120. If you want a complete kit, we don't have the 5/8 inch stud size, but for the 1/2 inch stud option, I recommend the Trailer Hub and Drum Assembly - 7,000-lb E-Z Lube Axles - 12" Diameter - 8 on 6-1/2...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924