bing tracking image
  1. Trailer Brakes
  2. etrailer
  3. Hydraulic Drum Brakes
  4. 3500 lbs Axle
  5. 10 x 2-1/4 Inch Drum
  6. 14 Inch Wheel
  7. 14-1/2 Inch Wheel
  8. 15 Inch Wheel
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
etrailer

Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs

Part Number: AKFBBRK-35-D
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$211.65
Trailer Brakes
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels. Great Prices for the best trailer brakes from etrailer. Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs part number AKFBBRK-35-D can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (477)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Brakes - AKFBBRK-35-D

  • Hydraulic Drum Brakes
  • 3500 lbs Axle
  • 10 x 2-1/4 Inch Drum
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Marine Grade
  • Free Backing
  • Manual Adjust
  • Single Servo
  • etrailer

Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.


Features:

  • Marine-grade hydraulic drum brake assemblies are great for boat trailers
    • Designed for use with surge-type trailer brake actuators
  • Free-backing design lets you back up without engaging the trailer brakes, even if the actuator is activated
    • Fall-away brake shoes only anchor on drums when brakes are engaged as trailer is moving forward
  • Automotive-grade friction material is molded to brake shoes
    • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
    • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
  • Periodic manual adjustment required
    • Fine-tooth brake adjustment gears allow for a more precise setting
  • Dacromet coating on backing plates offers superior corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
    • Durable enough for saltwater applications
  • Stainless steel springs are durable and rustproof
  • Aluminum hydraulic cylinders resist rust
  • Single plunger design
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, and mounting bolts included
    • Nuts and lock washers (BRKH10B) sold separately
  • QAI and CSA certified


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
  • Wheel size: 14" and 15"
  • Axle rating: 3,500 lbs
  • Limited 1-year warranty


Note: Because free-backing brakes are designed to eliminate nearly all friction between the brake shoes and the drum when you are driving in reverse, a trailer breakaway kit will not be effective should your trailer disconnect from your tow vehicle while you are backing up.


Free-Backing Brake Assembly

Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. These brakes are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.


Each of these free-backing hydraulic brake assemblies has a fall-away shoe, which provides full braking when your trailer is moving forward, but supplies only limited friction when the trailer is moving in reverse. During normal forward braking, the fall-away shoe expands to catch your brake drum. When driving in reverse, however, the fall-away shoe's extra spring will overcome the pressure from the brake cylinder. This keeps the leading edge from catching on the drum, so the shoe will not fully pivot into the drum. This exerts a smaller amount of friction, just enough to provide a minimal amount of braking when in reverse.


These trailer brake assemblies act as part of your trailer's hydraulic braking system. A hydraulic trailer brake actuator is required for these brakes to function.


Thoroughly Tested for Safety

These brake assemblies meet the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. These brake assemblies underwent extensive testing to measure stopping distances when braking. These brakes have also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Automotive-Grade Friction Material

Each shoe on these brake assemblies is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.


The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.



B10H-73 AxleTek 10" X 2-1/4" LH Hydraulic Brake Assembly - Free Backing - Drivers Side - 3.5K Axles - Dacromet Coat

B10H-74 AxleTek 10" X 2-1/4" RH Hydraulic Brake Assembly - Free Backing - Passengers Side - 3.5K Axles - Dacromet Coat





Customer Satisfaction Score:


Customer Reviews

Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs - AKFBBRK-35-D

Average Customer Rating:  4.7 out of 5 stars   (477 Customer Reviews)

Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.

by:

This is my second install of this brake kit (2 kits each time). The first set lasted a little over 4 years and then fell apart. The linings fell off the shoes, jammed against the drum, and locked the brakes up. It is less than 5 miles round trip to launch my boat. I don't need to launch or retrieve the boat very often so that is maybe 200 miles over 4 years.

Since all I needed were new brake shoes I was disappointed to find that my only choice was to replace the entire kit. While it is certainly easier to just unbolt the entire backing plate and everything on it, it is a very expensive way to replace brake shoes.

Bottom line: they are easy to install and work great (until they don't).



by:

I restored an old concrete buggy that I purchased surplus from a rental company. It was in pretty bad shape. I got it sand blasted. I painted it with Rustoleum. I installed new brake parts, master cylinder, and wheel bearing kits. Pretty big project but it came out great! Now I have a great little dual-axle dump trailer designed to carry a cubic yard of ready mix. Works great for short loads of concrete and for drain rock and landscape materials too.

I had to use JB Weld to get a good seal on the new plastic master cylinder cylinder-to-brake-hose connection, which was a pain because it leaked and required multiple attempts to fix. Plastic threads on the plastic master cylinder didn't seal with teflon tape. They are easy to over torque/strip! Maybe I did that initially, but JB Weld fixed the problem.

etrailer brake assemblies were easy to install and of very good quality. Fast shipping. Thanks!



by:

This review is for the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs - AKFBBRK-35-D. This worked perfectly on my 2008 Bear pontoon trailer with Axis branded 3,500 lb tandem axles and hydraulic surge brakes on one axle. It all went together smoothly without issue and after repacking the bearings and bleeding the system, the brakes now work again. A special thanks to Jameson for your time and recommendation on this kit, it was spot on!



by:

Here is some pictures of the before and after pictures of my boat trailer brake restoration. I contacted your customer service and told them what I wanted to do and they sent me all the parts that I needed. Everything went very smooth and all parts fit perfect. Thank you so much for your help and expert advice. Thanks again



by:

Fantastic way to repair brakes on trailer. Actually less cost than buying individual parts to complete the job. Both sides completed in under 2 hours. Will be sure to tell everyone i know that has trailers to used this site for all of their needs. This is the 2nd trailer we have done brakes on,

Extremely happy i found this site.



by:

Installation was as easy as it gets and these brakes have worked flawlessly.



by:

Excellent product that replaced 25 year old brakes on a boat trailer at a fraction of the price that local dealers wanted for them. I found all of the parts I needed by searching the site and everything installed very easily.



by:

The loaded marine grade backing plates made my job super easy. The fit was perfect and went smooth. I would like to see new nuts supplied with the studded backing plate. My order was processed fast and I received it quickly. Packaging was great.



by:

The quality of the unit seems fine, however they manufacturer is so cheap that they do not include the 8 nuts to hold the brakes to the axle. They expect you to to use the old nuts, in a perfect world that would be fine. Assuming your old bolt bolts and nuts are the same thread! Spent another $12 on nuts which is it a big deal but the hardware store was closed so I had to wait till the next morning. Wont order again.

Jenny N. profile picture

Jenny N.

7/7/2023

None of brands of brakes that we carry will come with the nuts or lock washers. We mention this on the product pages for the brakes. Some want to re-use what is on the trailer and some want to replace it. We do carry a replacement set as part # BRKH10B.



by:

This kit was a perfect fit and easy to install. Delivery was fast and easy. 100% recommendation.



by:

Nice. Perfect replacemen. For the price ace sends to just replace the whole loaded assembly vs pieces parts.



by:

The brakes work great. The new assembly had studs for mounting to the trailer and the nuts and washers were not included, so I had to get my own. Your information for ordering should make that clear.

Jenny N. profile picture
Etrailer Expert

Jenny N.

6/7/2023

The brake assemblies that we carry do not have hardware included and we mention it on the product pages. In case you want a complete new set of hardware, we offer part # BRKH10B as a quick way to get it.



by:

My new brakes look and fit great. This made the replacement on my Heritage boat trailer very easy. The quality looks great and should last me a long time.
Thanks etrailer for your help!



by:

Very, very prompt shipping!
Customer
svc rep very knowledgeable about hydraulic trailer brakes.
Packaging ensured product arrived without damage.
TWO NOTES: The brake line threads were not "well cut" on the right side wheel cylinder. To solved needed to "re-tap" the threads-- additional time required--
To make kit 'complete'--add 8 lock nuts to the package--will add about $0.80 to the kit and solve customers frustration of trying to find lock nuts with 5/8" across the flats. 11/16" across the flats will not work as too close to the welded axle on the mounting flange

Rachael H. profile picture
Etrailer Expert

Rachael H.

9/14/2017

Thanks for the follow up and reply. I did want to let you know that part BRKH10B is available and is linked as a related item. This item included 8 nuts and lockwashers.



by:

Perfect fit..... works great ....thank u

Jeremy profile picture

Jeremy

7/5/2021

Still working great



by:

etrailer has great products with fast and reliable service. I buy all my trailer supplies from them. I bought 2 hubs and drums for my boat trailer. I was going to give 4 stars because they did not include the 4 nut and bolts that hold the hub to axle with the product. (the old ones were so rusted they broke off), at the least they could offer for you to purchase them with hub. but I gave 3 stars because I went back to the reviews and others complained about the same thing. problem should have been fixed back then!!

Mike L. profile picture
Etrailer Expert

Mike L.

7/24/2019

The mounting hardware, part # BRKH10B is sold separately as mentioned in the product description.



by:

The boxes containing the brake kit was badly damaged due to transit. One of the springs popped off and the brake shoes were no longer aligned properly. Packaging was extremely poor. Hopefully there is no damage that I couldn’t see.

Jenny N. profile picture
Etrailer Expert

Jenny N.

5/10/2023

I am sorry to hear about the boxes and the spring that had to be reinstalled. If there is any more damage then we are happy to take care of it for you. I will have our Customer Service team reach out.



by:

I’m very pleased with the status provided and the delivery speed on my order. These should have my trailer back in operation today.



by:

The brake kits fit perfectly.



by:

just installed brakes,install ok.just hoping to get more milage and time out of these brake .because in the past i have not,i have had cylinders lock up on me on both sides, mechanical issues sitting on the side of the road stinks.but i have also learned that these brakes are not install and go .they need to be adjusted thru out the year for better wear



by:

Very poorly packaged, since the brake assembly and the grease seals were packaged together with just an envelope to protect the seals they naturally were smashed but also the brake pads were misaligned and the brake shoes had several chips on the pad surface
the brake pads don't concern me that much but I need you to send replacement seals

Sierra K. profile picture
Etrailer Expert

Sierra K.

8/23/2021

I apologize for the poor box and damage. Customer Service will be reaching out to you.



by:

Liked being able to ask questions before the purchase and being updated on the shipment of my purchase.



by:

Good product, fit very well and easy to adjust when installed ( lubricated the adjuster anyway) After a year of in and out of the salt water once a week for the season they look very good, a little rust, but not bad. Will see next year how they stand up.

Bruce S. profile picture

Bruce S.

8/26/2022

Update: brake pad came off and locked up trailer wheel yesterday. Told only 1 year warrantee on workmanship issue. 2 years and now I need new brakes because they failed.



by:

Backing plates arrived on schedule. Installed just fine.



by:

THANKS YOU EVERYTHING WORKED OUT WELL.


25
465
Show More Reviews

See what our Experts say about this etrailer Trailer Brakes

  • What Does "No Lockout" Mean?
    "No Lockout" means that this particular actuator # T47457007K does not have a built-in reverse lockout. Meaning that driving the trailer in reverse will actuate the brakes. You can add a reverse lockout to the actuator by adding a Reverse Lockout Solenoid # T4748800. Alternatively, you could also use free backing brakes such as part # AKFBBRK-35-D. The free backing design allows for backing up without engaging the trailer brakes.
    view full answer...
  • Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
    Instead of using the Hydraulic Brake Kit # AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right # T4423400 and Left # T4423500. These will fit with your ST175/80R13 trailer wheels and tires.
    view full answer...
  • Replacement Hydraulic Drum Brakes, Hub/Drum, and A-60 Actuator for 3,500 lb Axles on Boat Trailer
    We have exactly what you're needing! For replacing your hub/drum assemblies you need the kit # AKHD-545-35-EZ-K (2 per axle) and then for the brakes you need the kit # AKFBBRK-35-D (1 per axle). The actuator is a little different simply because there are multiple styles for installing the actuator on your trailer coupler so you'll want to look through these options to see which A-60 best matches your current A-60 actuator: - Top Mount 3-Bolt # 099-175-00 - Top Mount 3-Bolt # DX33FR ...
    view full answer...
  • Difference Between E-Coat and Dacromet on Trailer Brake Kit
    The e-coat on the # AKFBBRK-35 is basically a paint that uses an electrical current to apply it to the surface. The Dacromet coating on the # AKFBBRK-35-D is a water-based adhesive coating made of zinc and aluminum flakes. The part is dipped in the coating and then heated for a uniform application on the surface. The Dacromet is a much better choice for applications where corrosion resistance is important. That is why we list it as ideal for boat and snowmobile trailers.
    view full answer...
  • Replacement For Atwood 83000, 83010 Drum Brake Actuator & 10 Inch Free Backing Drum Brakes
    So the Atwood 83000, 83005, 83010 brake actuators are obsolete, and Atwood is no longer in business so there isn't a replacement master cylinder. You'll need to replace the whole actuator, and for one like the Atwood with the same 8,000 lb capacity that connects to a 2 inch hitch ball and mounts to a 3 inch trailer tongue, use the following from Demco: - Demco Hydraulic Brake Actuator # DM8609101 I do recommend sticking with drum brakes as there isn't a set of disc brakes for your spindle,...
    view full answer...
  • Timbren 3,500LB Axle-Less System With 4 of Lift, Hydraulic Trailer Brakes and Wheels/Tires
    We have the Timbren Axle-Less Trailer Suspension System # ASR3500S06 which has a 4" lift spindle with brake flange and will allow you to have a 5 on 4-1/2" bolt pattern. For the brakes we have either the Disc Kit # KOD59FR if you are wanting hydraulic disc brakes. Or you will need the Drum Brakes # AKFBBRK-35-D with 2 of the Hub/Drum Assemblies # AKHD-545-35-G-EZ-K per axle. To get the weight rating you need for the tires you will want to step up to the Provider ST205/75R14 Radial Trailer...
    view full answer...
  • Replacement Hubs and Brakes for UFP HD-1877-10
    I reached out to Dexter and found that the UFP-HD-1877-10 fits a standard 3,500 lb axle. For a hub and drum replacement you can use the # AKHD-545-35-EZ-K or for a galvanized option # AKHD-545-35-G-EZ-K. Then for hydraulic drum brakes you can use the # AKUBRK-35 or # AKFBBRK-35-D with a Dacromet coating. I have attached some installation videos below for your reference.
    view full answer...
    Image 1 for
  • Is It Worth It To Convert Surge Brakes On 1999 Jayco Eagle To Electric, Or Get New Surge Brakes?
    It's definitely way less work to keep what you have, surge brakes, than it is to convert everything to electric. Personally I'd just stick with surge brakes, as the only benefit you really get to electric brakes is the adjustability of the brake controller, and I don't think you'll see a big enough benefit to justify the cost. You'll need to know what size brakes your hubs take by either getting a part number from the hub, or measuring the inside dimensions shown below. The most common...
    view full answer...
  • Recommended Brake Line Kit for a Boat Trailer
    When it comes to picking out the correct brakes for your boat trailer you're going to want to gear toward anything that has a dacromet coating. This is going to give your brake superior corrosion resistance which is ideal since you'll be dealing with water often. As far as using rubber lines versus using steel lines, I'd recommend going with rubber lines. Reason being, rubber lines are going to be much easier to deal with than steel and will not deteriorate nearly as fast as steel would,...
    view full answer...
  • Recommended Hydraulic Brake System for an Escort Boat Trailer
    I will be happy to help you set up a new brake system for your Escort Trailer. I'll start from the back and work my way forward. I recommend the etrailer Hydraulic Brake Kit Left/Right Hand item # AKFBBRK-35-D. This is a 3,500 lbs set of brakes that are Marine-grade and designed for surge actuators. If you have a single axle trailer you will want the Kodiak Hydraulic Brake Line Kit item # 18SI-BLKIT. For tandem axle trailers you will need the Kodiak Hydraulic Brake Line Kit item # 18TA-BLKIT....
    view full answer...
  • My Surge Brakes Are Activating When I Back Up My Trailer - What Can I Do?
    Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a reverse lockout. For example, the Dexter DX7.5L A-60 Brake Actuator # DX56FR has an electric lockout. The solenoid is wired to the reverse light circuit on the tow vehicle. This way when the vehicle is put in reverse, the actuator will be locked...
    view full answer...
  • Recommended Replacement Braking Assembly and Bearing Kit for AxleTek Brakes
    Hey Dan, the only difference between the Hydraulic Trailer Brake Kit # AKUBRK-35-D and the Hydraulic Brake Kit # AKFBBRK-35-D is that # AKFBBRK-35-D is free backing which lets you reverse your trailer without the brakes being actuated by the actuator and # AKUBRK-35-D is not. Other than that, these two braking assemblies are the same with the same, and will work fine to replace your Hydraulic Trailer Brake # AKFBBRK. For your Dexter Trailer Hub and Drum Assembly # 8-247-50UC3-EZ you're...
    view full answer...
  • Replacement Hub/Drum and Hydraulic Brake Assembly for Boat Trailer With 3,500 lb Axle and 13" Wheels
    The # 8-247-50UC3-EZ and # AKHD-545-35-G-EZ-K will both fit and work with your 13" wheels. These are also compatible with the # 40716-15 from your previous question. For the most part it comes down to cost between the two hub/drum assemblies. However, since this will be going in the water on your boat trailer I would stick with the Dexter which has the 500-hour salt spray rating. The Hydraulic Brake Kit # AKFBBRK-35-D will work with your 13" wheels but I would stick with the Demco. The...
    view full answer...
  • Will the Kodiak Brake Line Kit Work with the eTrailer Hydraulic Brake Kits
    Yes, the 3/8"-24 fittings on the end of your Kodiak Hydraulic Brake Line Kit part # 18SI-BLKIT will work with the Hydraulic Brake Kit part # AKFBBRK-35-D. This is a very standard brake line fitting size so is works with pretty much all assemblies we offer.
    view full answer...
  • 10" Hydraulic Surge Brake Assemblies Needed For A Boat Trailer
    Hey Rob, The Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies # AKUBRK-35 you were looking at would be a single pair (left/right). These are also available with a free-backing feature and Dacromet finish with part # AKFBBRK-35-D for superior corrosion resistance.
    view full answer...
  • Does the Hydraulic Brake Kit Come With One or Two Brake Assemblies
    The Hydraulic Brake Kit # AKFBBRK-35-D comes with both the left hand and right hand assemblies so you just need to purchase one kit per axle. If you are needing to replace one specific brake then the left hand is part # AKFBBRK-35L-D and the right hand is part # AKFBBRK-35R-D.
    view full answer...
  • Replacement Hydraulic Trailer Brakes, Hubs, and Bearings For a Trailrite Boat Trailer
    I recommend the etrailer Hydraulic Brake Kit # AKFBBRK-35-D as it has a Dacromet coating on the backing plate, stainless steel springs and an aluminum hydraulic cylinder that will all reduce corrosion on the inside of the brake system. The etrailer Trailer Hub and Drum Assembly # AKHD-545-35-G-K is galvanized coated, making it ideal to be used with your boat trailer. It has a 5 on 4-1/2" lug pattern and includes new lug nuts, races, bearings and a grease seal for installation. It looks...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for Image 5 for Image 6 for
  • Size Fittings for Brake Lines on the Hydraulic Brake Assembly Kit # AKFBBRK-35-D
    The thread size that the brake line fittings of the Hydraulic Brake Kit # AKFBBRK-35-D that you referenced is 3/8"-24. This is the standard size that brake lines and fittings are made for.
    view full answer...
  • Nut and Washer Kit for Studs of Hydraulic Brake Assemblies AKFBBRK-35-D
    We have a kit that includes the correct nuts and washers for the brake assembly set part # AKFBBRK-35-D that you referenced with part number # BRKH10B. A lot of people end up reusing the hardware they have but I apologize it wasn't clearer this didn't come with what you needed. The nut size is 7/16 by 20.
    view full answer...
  • Difference Between Demco 10 inch Drum Hydraulic Brakes and etrailer.com Brand Brakes
    The big differences is basically pricing and brands. The part # AKFBBRK-35-D is a pair of Dacromet coated drum, hydraulic brakes that are free-backing. The part # 40716-15 is essentially the same thing buy made by Demco. The etrailer brand is going to cost less since it's our brand and there's not as much markup so it's the better deal. Now the part # 40716-15 is basically just the part # 40716 and # 40715. What doesn't make much sense though is the pricing difference. It would seem to...
    view full answer...
  • Drum Brake Replacement Assemblies for Use with Titan Actuator
    Thanks for the photo and tape measure. That makes it fairly easy to help you get what you need. You need 3500 lb single servo brake assemblies. My recommendation is the Hydraulic Brake Kit - Dacromet - 10" - Left/Right Hand # AKFBBRK-35-D. The Dacromet is for increased corrosion resistance. You could alternatively use the Hydraulic Trailer Brake Kit # AKFBBRK-35 for a standard protection against corrosion or even upgrade to the Demco Galvanized set # 18788-87 for superior rust prevention. If...
    view full answer...
    Image 1 for
  • Recommended Replacement Drum Brakes for Boat Trailer with 3500-lbs Axles
    I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D, which will work with your current setup and are perfect because the Dacromet plating is designed to withstand exposure to water; so they're ideal for boat trailers. These brakes are free backing, so they'll allow your trailer to backup regardless of whether or not you've got a lockout feature on your actuator, and they'll work with a breakaway kit. If you've...
    view full answer...
  • Bolt Pattern of Mounting Flange of Hydraulic Brake Kit # AKFBBRK-35-D
    The distance between the 4 mounting studs of the Hydraulic Brake Kit # AKFBBRK-35-D that you referenced is 2-7/8 inches vertically and horizontally. This is the standard 4 bolt pattern for trailer brake assemblies.
    view full answer...
    Image 1 for
  • Can Hydraulic Brake Kit AKFBBRK-35-D Mount With Hydraulic Connector on Side
    Since the bolt hole pattern is square with the bolt holes equidistant, the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D can be mounted so that the hydraulic connector is on the side if you like as the flange won't interfere. In regards to the distance from hub face to flange with the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized # 8-247-50UC3 and Brake Kit # AKFBBRK-35-D, without having...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Brake?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.