bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
Optronics

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

Part Number: A46PB
In Stock
$4.94
Retail:$7.43
You Save: 34%
Accessories and Parts
Add to cart
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead Wiring A46PB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A46PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (652)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A46PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire
  • 6 Inch Long
  • Right Angle Pigtail

2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics side marker, clearance, and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Black wire for power
  • Wire length: 6"


diagram of pigtail

Pigtail is a direct replacement for:

  • Uni Bond # PT6020
  • Wesbar # 108662
  • Truck Lite # 94902
  • Grote # 67050
  • Peterson #142-49
  • Bargman # 40-00-002


A46PB Optronics PL-10 Right Angle 2-Wire Pigtail for Trailer Marker/Clearance and Utility Lights

Alternate part number: A-46PB




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

652 reviews
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.

by:

Good Price, fast shipping



by:

They work



by:

Looks Good



by:

great



by:

Direct replacement



by:

Very good service. QUICK!



by:

wire harnesshigh quality



by:

Products delivered as depicted at great price and prompt shipping.



by:

Just what i needed. Your Store is now on my favorites list.



by:

The connector was just what I needed and the shipping was fast and reasonable.



by:

Great product overview after asking online, ordered, quick order acknowledgement and shipping info; received in 2 days and fits exactly like it was supposed to. Will order again from this firm, if necessary, in the future.



by:

Products were as advertised and, as usual, with etrailer orders, delivery was prompt.



by:

As described, excellent customer serviceand all my parts arrived in 2 days. Etrailer.com will get all my future business.



by:

The wires are really straight and shiny. The connecter has that new connector feel and glossiness. The ring connector is solidly crimped. Truly an excellent piece of wiring.



by:

Replacing the wiring on my trailer so I am replacing the plugs to the marker lights and tail lights too so there is no problems. Well made, fast shipping so I will buy from E-trailer again.



by:

Perfect replacement for the wire that ended up on the side of the road! The broken fender and light made it and this wire was the exact replacement I needed to reuse the old light.



by:

I ordered a Optronics trailer tag light which I received promptly, but It didn't have the electrical plug. This was my fault for not reading the description. The plug is sold separately. I ordered the plug and got it in three days. It fits perfect. I have not used it yet, as I have not finished my trailer.



by:

Here is the light I bought from etrailer.buyers work lights and optronic marker lights. Very nice Very bright.



by:

Great Service and Selection for all things Winnebago.
Many thanks to David Straw for his professionalism and helping me find the correct part for my 20 year old motor home.

Doug profile picture

Doug

2/7/2025

Still Working perfectly

JonG profile picture
Etrailer Expert

Jon G.

2/8/2025

@Doug Great to hear!


by:

I've been extremely pleased with the Optronics branded products!

The right angle design allows the wiring to follow along the contours of the trailer without bending. The connector, wire and insulation are well make and very durable.

This item pairs well with the Optronics Trailer marker lights. They 'snap' into the lights to ensure a secure fit. The 6" leads provide enough length for my application.

I would buy again as they pair nicely with the Optronics lights!

Timothy profile picture

Timothy

5/27/2024

After a year on the boat, the connectors are still working flawlessly. Ive never had an issue with them coming loose and they show no signs of corrosionrust. Very pleased with these!



by:

The etrailer listing for lighting products should clearly show all the options and components required for a complete assembly. I bought the LED lights on a previous order and when received realized I need additional items to make it a complete assembly. The additional items were pricey considering that they are just short pieces of wire and a plastic base. Would suggest that the entire assembly be listed at a reduced price. I also lost out on free shipping with this additional order.
Your web parts listings are generally very good and informative but if I missed this maybe others have or will also.
Thanks,



by:

All products received were as advertised for quality and fitment.The service received was unexpected and appreciated. Speaking with people that actually know their product, offering solutions as needed and over-performing on deliveries has made me a loyal customer to eTrailer. It is refreshing to know a company takes the definition of “service” seriously. Thank you for helping us get our trailer back on the road sooner than expected!



by:

Worked great.



by:

Great product for my boat trailer marker light. Product shipped quickly, as usual, from etrailer. I have never been disappointed with any product or service from this company. Another 5 star review!!



by:

Made the job easy!


25
652
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Replacement Lens Availability for Reflect-O-Lite SAE-P-P1-68
    Unfortunately we do not have any replacement lenses for your Reflect-O-Lite lights. There may be some out there somewhere but the only solution we have for you would be to replace all of your lights. If you end up wanting to do this I can help you with replacement lights but it may be worth seeing if somewhere else has replacement lenses.
    view full answer...
    Image 1 for
  • Replacement Grommet for Optronics
    Hey Jay! I am definitely going to need you to send me those pictures to the email address you receive this response from. Meanwhile I have listed some of the parts I think you described below along with that grommet you need: Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC item # A91GB Replacement Pigtail - 3-Wire - 90 Degree item # 40-00-004 Right Angle 2-Wire Pigtail for Optronics Trailer Lights item # A46PB What kind of trailer do you have?
    view full answer...
  • Is There LED Version of Optronics Trailer Clearance Light MC52RB
    There is absolutely an LED alternative with the same dimensions as the incandescent Round Trailer Clearance, Side Marker Light # MC52RB. What you need is the following: - LED Trailer Clearance and Side Marker Light # MCL52RB The # MCL52RB is the same 2-15/16" diameter with mounting holes that are 2-15/16" diameter apart on the flange. The only other thing you'll need with the light is 2-Wire Pigtail # A46PB.
    view full answer...
  • Availability Of White Replacement Fender For 2003 Shoreland'r Trailer W/ ST205/75R15 Tires
    I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" # PF11X35W which will work perfectly with the ST205/75R15 tires on your 2003 Shoreland'r Trailer and closely resembles your current fender. You will also need mounting brackets # PF1135-BKT-2 to mount the fender to your trailer. In regards to the clearance lights I will need to know the length...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Amber Clearance Light for Dutchman Kodiak
    The lenses on clearance lights are not generally removable as they are often "sonically sealed" such as the Optronics Trailer Clearance or Side Marker Light # MC57AB; this means they are submersible. Instead of buying a light and taking the lens off I strongly recommend an LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL59AB for your Dutchman trailer because an LED is a far better, much longer lasting option. You only need to make sure your existing lights have the...
    view full answer...
    Image 1 for
  • LED Clearance Light Recommendation for Sundowner Horse Trailer
    What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part # AL91RB and for amber part # AL91AB. You'll also need the grommet part # A91GB and the right angle pigtail part # A46PB and you'd be set.
    view full answer...
    Image 1 for
  • Replacement Taillights, Wiring and 7-Way Connector for Car Hauler
    To fit the round 4-1/2 inch holes on your trailer for the rear brake lights you could use the # STL42RB as this will fit in that hole. For a pigtail harness you would also need # A45PB. For the side clearance lights you would need to enlarge the holes to 3 inch in diameter, use the # A55GB as a grommet and then use # MCL59AB for the lights and # A46PB as a wiring harness. For a replacement 7-way with 8 feet of wire for running new wire everywhere you would want the part # H20046. You...
    view full answer...
    Image 1 for
  • Replacement Alternative for the Globrite Part 9500-88-BLU
    I do have options for you but we do not carry the Globrite part 9500-88-BLU. However, based on my research this light has a clear lens with an LED bulb and measures to be 2" in diameter x 1" deep. For a replacement, I recommend using the LED Trailer Clearance/Side Marker Light part # MCL55ACB for amber or part # MCL55RCB for red. This light has a clear lens with LED bulbs and dimension of 2" in diameter x 1" deep. In order to install this light you will need to use the pigtail part #...
    view full answer...
  • Replacement Clearance Taillight Solution for EZ Loader 250-032130
    I looked up your EZ Loader part number and it appears to be the same design as the part # AL91AB which for the matching grommet you'd then need the part # A91GB. You'll also need the wiring harness # A46PB.
    view full answer...
  • Determining If GloLight LED Trailer Light MCL157AB Will Fit PJ Utility Trailer
    It is possible that the GloLight LED Trailer Clearance or Side Marker Light - Submersible - 9 Diodes - Round - Amber Lens # MCL157AB you were looking at will work on your PJ Utility Trailer, but to be sure you would need to have a 2-1/2" grommet like the # A55GB in the frame of your trailer. If you do not have one you can add the # A55GB but you will need to drill a 3" hole for it to fit in. The # MCL157AB does not include the 2 wire harness, so you would also need the # A46PB. I included...
    view full answer...
  • Replacement Clear Marker Light For a Glo-Brite 9500c-88
    While we do not carry the Glo-Brite 9500c-88 you currently have, we do have a light that will work as a replacement for you. From the information I could find on your Glo-Brite 9500c-88, it measures 2" in diameter. For the clear light, you would want the Optronics Miro-Flex LED Utility Light # UCL50CB. This light measures 2" in diameter and should fit in your current grommet. You would also need the 2-Wire Pigtail for Optronics Trailer Lights # A46PB. If you want to replace the grommet...
    view full answer...
  • Trailer Wiring and Lighting Replacement for Trailer with 4.5 inch Red and 2.5 inch Amber Light
    For a 4-1/2 inch diameter trailer taillight that can do stop/tail/turn functions we have the part # STL43RB which would work well. For a rubber grommet then we'd need the part # A45GB. Then for a pigtail harness you'd need the part # A47PB. For the 2-1/2 inch amber lights you'd want the part # MCL59AB and for a grommet for this you'd need part # A55GB. For a pigtail for this you'd want part # A46PB. Then for 4-way wiring sold by the foot you'd want the part # 16-4B-1.
    view full answer...
    Image 1 for
  • Recommended Amber Clearance Light To Replace Glo-Brite 9500-88
    I would be happy to help! While we do not carry the Glo-Brite 9500-88 you have in your trailer, we do have a light that will work as a replacement for you. Based on the information I could find on your light it measures 2" in diameter, and based on the picture you provided it mounts in a grommet. We have the Miro-Flex LED Clearance or Side Marker Light w/ Reflector - Submersible - 9 Diodes - Amber Lens # MCL50AB which is 2" diameter and will fit perfectly in your grommet. You will need...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Clearance Light Recommendation to Fit 2-3/4 inch Diameter Hole
    For a grommet that fits the diameter hole of 2-3/4 inches we have the part # A57GB which fits lights that are 2-1/2 inches in diameter like the Miro-Flex LED Trailer Clearance or Side Marker Light # MCL51RB. You'd need these two things plus a wiring pigtail part # A46PB and you'd be set.
    view full answer...
  • Does The Optronics LED Side Marker Light # AL91AB have 2 Male Connector Posts
    Yes, The Thinline LED Clearance and Side Marker Light # AL91AB has 2 male connector posts on it. This waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. It is 2-1/2 inches long by 1-3/16 inches wide by 7/8 inches deep. The Right Angle 2-wire pigtail # A46PB and The Mounting Bracket # A91BOB are sold separately. I attached a review video link below.
    view full answer...
  • Recommended Red Clearance Light to Match Amber Clearance Light
    I believe you are looking for the Sealed, Miro-Flex, 2" Round, LED Trailer Side Marker, Clearance or ID Light, 9 Diode - Red # MCL50RB to go along with the Sealed, Miro-Flex, 2" Round, LED Trailer Side Marker, Clearance or ID Light, 9 Diode - Amber # MCL50AB for your trailer. You will also want the Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead # A46PB and the 2" Round Grommet - Flush Mount - Open Back # A54GB for this installation. Let me know...
    view full answer...
  • Recommendations For Adding LED Marker Lights To A 20 Foot Cargo Mate Trailer
    You are correct. Red lights should always be as close to the rear of the trailer as possible. With that also said, if you wanted to use something like the Optronics Thinline LED Trailer Fender Light w/ Bracket # MCL67ARB on the fender, you will want the red light pointed towards the rear of the trailer and the amber light pointed towards the front of the trailer. If you do not already have the lights picked out, the Optronics Thinline LED Clearance and Side Marker Light # AL91RB (Red)...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Trailer Clearance Light for PM150
    The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part # AL91RB. For a replacement harness that would plug into this you'd need the part # A46PB and then for a grmmet part # A91GB for a flush mount or part # A91BOB for a bracket for surface mount.
    view full answer...
    Image 1 for
  • Incandescent and LED Lights to Replace Wesbar Amber Marker Light # 203367
    The original part number you referenced, 203367, is the stock number for a light made by Wesbar, a producer of OEM and aftermarket trailer lighting. Their waterproof LED equivalent version, part # 47-203667, is indeed an exact drop-in replacement for the incandescent version. This light assembly uses a pigtail wire harness for connection, part # A46PB, and a rubber mounting grommet # 221588.
    view full answer...
  • Can Optronics LED Mini License Plate Light # LPL31CB Mount Upside Down Without Water Leakage
    The light you referenced, Optronics LED Mini License Plate Light # LPL31CB, is intended to mount so that its chrome-finish cover is on top. Although it does have a weathertight seal against the elements, this is intended to provide protection from water damage in the usual mounting position. I recommend one of the lights shown on the linked page since these products are all submersible. None of these happens to be an LED-type however. Optronics # LP91CB can be used along with their bracket...
    view full answer...
  • What Size Hole Needs to be Drilled to Install 2-1/2 inch Optronics Clearance Light MC57RB
    The Sealed, 2-1/2" Round Trailer Clearance, Side Marker Light with Reflector # MC57RB requires the use of a the Grommet part # A55GB to install. This grommet will require a 3 inch hole to be drilled. For a pigtail harness you would need the part # A46PB as well.
    view full answer...
  • 2 and 4 Inch Diameter Trailer Lights, Grommets, and Harnesses
    I will be happy to help and give you some options. For 2 inch diameter red lights we have several options: # MC53RB (use grommet # A54GB and harness # A46PB) # MCL50RB (use grommet # A54GB and harness # A46PB) # MCL55RB (use grommet # A54GB and harness # A46PB) # MCL55R1224B (use grommet # A54GB and harness # A46PB) All in one option # MCL-50CRK # MCL155RB (use grommet # A54GB and harness # A46PB) For 2 inch diameter amber lights we also have several options: # MC53AB (use grommet #...
    view full answer...
  • Procedure to Re-Install Trailer Side Marker Lights
    Installation methods will vary depending on the nature of the particular light you are using. We offer a wide range of clearance/marker lights (all can be seen on the link provided) and these include flange-, flush- and surface-mount types. You can use the filters in the left-hand margin to narrow the product results shown to just those light that meet your requirements. You can sort by lens color, bulb type, mounting type, brand and dimensions. For example, in 2-1/2- x 1-1/2-inch size...
    view full answer...
  • Recommended Wiring and Bracket for an Optronics AL91AB
    We definitely have the wiring and brackets needed to get you up and running. With that being said, you will need the Right Angle 2-Wire Pigtail # A46PB and the Mounting Bracket for Optronics AL91 # A91BOB. The # AL91AB lights will snap into the # A91BOB and then the # A46PB will plug directly into the back.
    view full answer...


< Previous
123. . .6




Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew L
Video by:
Andrew L
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Shane T
Installed by:
Shane T
Employee Brent H
Installed by:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<