Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Stop the invasion of unwanted insects, pests, and debris into your Suburban RV water heater, Atwood furnace, and battery vents. Stainless-steel screen prevents wasps, mud daubers, and birds from building nests that may block your vent's airflow.
Features:
Specs:
Note: Be sure to inspect screen monthly and clean when necessary to maintain proper airflow.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going be taking a look at the Valterra bug screen for RV's. This bug screen is going to be great for RV furnaces, water heaters and battery vents. It's very easy to install. It's made from a heavy duty stainless steel construction. It's going to do a great job at keeping our unwanted pests like nesting insects, birds, and rodents. It offers minimal air flow restriction.
It's going to include one screen, one installation tool, and two spring fasteners. Taking a look at the dimensions real quick. Going edge to edge this direction is 4 1/2 inches, other direction is also 4 1/2 inches. Then the depth, it's going to measure about 1 and 5/16ths of an inch deep. Now it's always a good idea to inspect your screens monthly and clean them when necessary to help maintain proper air flow. When you're ready to install your screen, you want to position your screen over the vent louvers and determine the best locations to install the springs. Now on the spring itself you're going to notice that one end is open.
The other end has a cross bar that runs across it. The cross bar end connects to the vent, the open end connects to the screen. Now the best place to hook this spring connector is below the louvers on the flat part of the panel, and that's of the vent. The other end of the spring is going to connect to the screen. Then you can simply use the included tool. This is going to help stretch this spring and easily hook this spring onto the vent louvers. That's going to do it for today's look at the Valterra bug screen for RV's..
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Stop the invasion of unwanted insects, pests, and debris into your Suburban RV water heater, Atwood furnace, and battery vents. Stainless-steel screen prevents wasps, mud daubers, and birds from building nests that may block your vent's airflow.Looks like it's built to last.Have not installed yet but very confident in heavy gauge material. Definitely going to order more parts from you
Easy to install. Just make sure when using the tool when you insert go through the center of the spring. Then hook up easy.
Works great on a 2021 Jayco Jay Feather 24BH
The screen is great. Nice and sturdy. Easy to install. I used this on the left side of the heater door. Part number A10-1323VP for the right side.
The retaining clips, not so much. On paper, this was probably a good idea, but I could not get the clip to stay connected. I ended up using a role of small medium gauge wire to hold this in place and now the screen is locked in place.
Your site is easy to use and your prices are competitive also.
Installation was relatively easy, instructions were straight forward and easy to follow.
Excellent product. A bit fiddly to install the spring retainers, but once you figure it out it goes smoothly enough.
And they do keep nest-building bugs out.
Excellent quality component. I havent determined the best way to mount it on our heater yet.
Screen came in good condition. Easy to install. Dometic 6 gal. water heater.
Awesome service quick shipping
Fantastic !
I cannot rate because the size is ok, but cannot install in my Jayco Redhawk RV because has other components that makes difficult to install and will be returning them.
Juan
3/25/2022
Putting the bug screens with the Springs is dificult, Springs stay loose, but I figure out that if I remove the base of the vents and put thin wires from the inside out of the heater and furnace vents corners or on top or bottom of the screens, I can tighten the tips of the wires over the screens and it will keep the bug screen tighten enough without using the springs,, those are options I got and I think it will work, so will try that, thank you!
great installed in 1/2 hour looks great we will tell others who we rv with about it.del on time ,great people to deal with our sales person was great and knew what we were looking for,.I wish he would have enclosed his card so we could have given it to our wagon master so others could get some.THANKS
Not a perfect fit, but works Well enough to help keep the mud daubers out.
Would not stay in place with the springs provided
Douglas
3/20/2022
Works well. I ordered two sizes assuming I could use on different vents. One size worked perfectly, the other didnt so I will repurpose it.
Stayed in place for a year now. No issues.
Great fit, easy to install.
Easily installed to jeep bugs out!
Great service. Thank you.
Placed order and it was delivered 2 business days later
Quality product
It fits
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/25/2022
You mentioned that you were not able to install due to other components and I wanted to ask to see if you could explain in more details.