Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers - Gray

See what our Experts say about this Yakima Accessories and Parts

• What Replacement Front Ratcheting Arm Do I Need for My Older Yakima HoldUp Bike Rack?
  I have a solution for you. For your older-style HoldUp, Yakima only sells the complete tray (platform, arm, front wheel tray/cup, and ratcheting hook). For this part, you will need the Replacement Front Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90197. To install the replacement assembly, you will use your current mounting hardware. Also, you will need to use your current cable lock to switch over to the new assembly. I went ahead and attached a photo to this answer that shows...
  view full answer...
  
• Installation of Yakima HoldUp Wheel Holder Assembly
  I reached out to Yakima and actually sent them your picture because it didn't look right to me. Turns out I was correct; your old wheel holder has an extra hole that they believe was drilled at some point but wasn't there when it was manufactured. It looks like someone drilled a new hole in order to position the tray differently than designed. Yakima definitely recommends using the pre-drilled holes in your new tray, part # Y90197, and not drilling your own as you asked.
  view full answer...
  
• Replacement Front Wheel Tray For An Older Yakima HoldUp Bike Rack
  You are correct, I believe you're needing the: -Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers # Y90197. This will replace the front wheel tray assembly on your Yakima HoldUp bike rack and has the wheel trays in the orientation you're needing.
  view full answer...
• Replacement Wheel Tray For Yakima HoldUp Bike Carrier
  We do offer replacement wheel trays for your Yakima HoldUp bike carrier. I recommend part # Y90197 for the . This will work with the HoldUp bike racks for 1-1/4 and 2 inch hitches. We also have the replacement Ratcheting Wheel Hook for the Holdup. This is part # Y8880316 and will fit models Y02445, Y02443, and Y02446.
  view full answer...
• Difference Between the Replacement Wheel Assembly part # Y90198 and # Y90197
  The difference between the two parts you referenced is that the Replacement Front Wheel Assembly # Y90197 is the track for the front side of the rack and the Replacement Rear Wheel Assembly # Y90198 is for the rear track of the rack. If you are unsure which side you need check out the picture I attached that shows the two on a rack and will help you see which side you would need. And yes, they both come assembled as you see them in the pictures.
  view full answer...
  
• Replacement Wheel Holder Assemblies For The Yakima HoldUp Bike Carriers
  Yes, the Replacement Front Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90197 does have the Yakima sticker on the side of it. This wheel assembly is for the left side, and will fit the following models: Y02433, Y02435, Y02434, Y02433-02435; Additonally, should you ever need the right side, you can use the Replacement Rear Wheel Holder Assembly for Yakima HoldUp Bike Carriers # Y90198.
  view full answer...
• Replacement Front and Rear Wheel Assemblies for Yakima HoldUp Bike Rack
  I checked with Yakima and they list the replacement assemblies the same way we do, # Y90197 for the front, and # Y90198 for the rear. But I see what you are saying. The pictures are swapped. That we can fix easily. You would receive the correct part because the manufacturer boxes are labeled with the appropriate part numbers.
  view full answer...
• Replacement Front Wheel Holder for Yakima HoldUp Platform Bike Rack
  To fix your damaged HoldUp (models Y02433, Y02435, Y02434, Y02433-02435), you will need to replace the entire piece with the rear wheel holder assembly # Y90198 you were looking at. I checked with Yakima and they informed me that they do not sell these parts separately due to the front wheel tray being captured in the arm assembly of the rack when it is being manufactured and there is no way to get it out without damaging the rack. If you instead need the front wheel holder assembly you...
  view full answer...
• Parts Recommendation to Replace a Cracked Front Wheel Tray on a Yakima Holdup Bike Rack
  I spoke to my contact at Yakima and he informed me that the only way to replace the front wheel tray on your Yakima Holdup # Y02445 would be to replace the entire piece with part # Y90197 that you referenced. He said that the front wheel tray is captured in the arm assembly of the rack when it is being manufactured and there is no way to get it out without damaging the rack.
  view full answer...
• Replacement Parts Needed for Older Yakima HoldUp Bike Rack for 1-1/4" Hitch
  We do have a variety of Yakima HoldUp replacement parts for the older models. I'm not sure which exact one you have as the part you gave isn't a standard part number, but if your HoldUp is the 8002434 model made from 2009 - 2012 then some of the part include the Replacement 1-1/4" Tongue # 8880581, the Front Wheel Holder Assembly # Y90197, and the Rear Wheel Holder Assembly # Y90198. If you can give me some more specifics into what you're needing to replace I can help you figure out if...
  view full answer...
• Replacement Front Wheel Assembly for Yakima HoldUp Bike Rack
  The part closest to the car is actually the front wheel assembly. If you have the older style gray Yakima HoldUp you need Replacement Front Wheel Holder Assembly # Y90197. For the newer style black Yakima HoldUp you need the Replacement Front Wheel Assembly # 8890280.
  view full answer...
  
• Solution for Yakima Holdup Bike Rack that Has Broken Hold Down Arms
  Looks like you have a Yakima Holdup that was made from 2008-2009 based on your picture. The replacement parts for it are a bit limited due to it's age which means that from Yakima you can only replace the front tray assembly with # Y90197 or the rear with # Y90198.
  view full answer...
• Replacement Part for Stuck Yakima HoldUp 2 Wheel Tray
  My best guess is that warping could have occurred somewhere on the wheel tray and/or debris in the hinge. Especially if both front trays won't move. Some things I'd check first to troubleshoot is to check if there's a gap between the folding front mount and the plastic in between on both sides. If there's a gap, there might be debris. If not, then the plastic itself might be stopping the rotation. Next, I would try lubricating the folding mount. See if you can get any movement at all. If...
  view full answer...
• Replacement Tray Solution for Yakima Holdup Bike Racks
  Since you have the silver version of the Yakima Holdup you can replace the entire trays of the rack with part # Y90197 for the left side tray or part # Y90198 for the right hand side. The arm kit you mentioned only fits the newer racks.
  view full answer...
• Replacement Wheel Assembly For a Yakima HoldUp Bike Carrier
  To ensure you get the correct replacement cross arm for your Yakima HoldUp bike carrier, we will want to know if you have the newer style black model or the older style gray model. If you have the older gray model, then you will want either the Front Replacement Wheel Assembly, # Y90197, or the Rear Replacement Wheel Assembly, # Y90198. The front wheel assembly is the wheel tray that is closest to the vehicle (see photo). The rear wheel assembly can be identified by the Yakima sticker on...
  view full answer...
  
• Correct Replacement Wheel Assemblies for the Yakima HoldUp 2 Bike Rack
  I did some research and it appears that the numbers you gave go to the Yakima HoldUp Bike Rack for 2 Bikes # Y02443. With that being said, since you're needing to replace a broken arm you are actually going to need to replace the entire wheel assemblies with both the Replacement Front Bike Tray Assembly for Yakima HoldUp Bike Carriers # 8890280 & the Replacement Rear Bike Tray Assembly for Yakima HoldUp Bike Racks # 8890281 as just the replacement arm is not available. If you have the...
  view full answer...

Do you have a question about this Accessories and Part?