bing tracking image
  1. Trailer Bearings Races Seals Caps
  2. Redline
  3. Caps
  4. Oil Cap
  5. 3.5 Inch O.D.
Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle

Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle

Item # RG04-300
Our Price: $37.19
Trailer Bearings Races Seals Caps
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.34 lbs
In Stock
Trailer Bearings Races Seals Caps RG04-300 - Oil Cap - Redline
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replaces the oil cap, O-ring, and plug for your Dexter axle. Fits 9,000-lb and 10,000-lb general duty axles manufactured after 7/09. Great Prices for the best trailer bearings races seals caps from Redline. Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle part number RG04-300 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (21)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Redline Trailer Bearings Races Seals Caps - RG04-300

  • Caps
  • Oil Cap
  • 3.5 Inch O.D.
  • Redline

Replaces the oil cap, O-ring, and plug for your Dexter axle. Fits 9,000-lb and 10,000-lb general duty axles manufactured after 7/09.


  • Replaces Dexter 21-88 oil cap
  • Fits 9,000-lb and 10,000-lb general duty Dexter axles manufactured after July 2009
  • Includes oil cap, O-ring, and plug


  • Dimensions:
    • Overall diameter: 3.89"
    • Threaded diameter: 3.47"
    • Inside diameter: 3.16"

RG04-300 Redline Trailer Parts Pro Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle

Video of Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Bearings Races Seals and Caps Rebuild

Speaker 1: Today we're going to take you through the rebuild process on a couple of hubs. We've got an idler hub, and here we've got a hub and drum assembly. Works with electric rigs, but this can also work for just standard discs, if you've got a disc brake style setup.Basically what we're going to show you is how to get all of the bearings out. How to remove the seal. How to remove the race's if they're damaged, then get them replaced in the proper manner. We'll show you how to use an easy loop hub, which we have here.The first thing we are going to need to do is, get the grease cap off the end.

It can have either a rubber plug in it like this one does, or it can be a solid metal cap.These are pressed fit in there, basically by tapping on them on the back side. To remove them, a deadbolt hammer is typically what we're going to use. We're just going to start tapping as we go around. You'll see a little separation start right here, and slowly it'll work it's way off.Now the next step's going to vary a little bit depending on your axle setup. Do you see this is going to have a keeper that goes around the nut.

And that prevents that from being backed off, or removed. A lot of times you'll have a castle nut, which will have just little tabs that stick off, and there will be a cotter pin that passes through it. Just depending on your application, you need to get the keeper for the nut off. This style we just kind of pry out. A cotter pin you would just remove of course.Once we have that off ...

We'll start to take off the nut here, and the washer that's in behind it. Now yours should look a whole lot more dirty than this. There should be a lot of grease packed in, and through the hub, this one's brand new. We thought it'd be nice to show you the components before the grease was on .. Of our washer that comes off.And then here we're going to have our outer bearing.

Continue to pull that. We're gonig to have our inner bearing here. That sits in the backside of the hub. And we didn't put it in yet, we will show you how to put it in. But a seal would typically be covering the backside here. We'll show you how to use a seal removal tool, or another tool. To get that pried up and out. To get an access to that inner bearing.Now for a drum style like this, that process for disassembly is going to be just the same. One thing to keep in mind if you're using a disc brake setup. You'll have to remove the caliper before the disc is going to come off.Now once we have the spindle exposed, as we said this is going to be really greasy. We want to get all the grease removed, and the first thing we'll do is inspect it. We want to make sure that it looks just like what we have here. Everything's nice and smooth. We don't see any kind of discoloration, or any marring on the metal. Indicating that our bearing's got hot.If you do have any of those symptoms, at this point it's time to replace those bearings. You don't want to repack them. Get new bearings, and put in there. You might have a bearing that's come apart in here. Another surface to ensure is in good condition, is where your seal is going to go. That helps seal all the grease inside of our hub. With a damaged or broken seal, that grease is going to seep out. Either out of the hub, or in this case into our brake assembly.Now if your axle has brakes, we're also going to check the disc. Make sure it doesn't have any issues, or your hub. And this is going to be a hub and drum assembly. The brakes are going to ride on this machine surface. You're going to check that for signs of excessive heat, discoloration, or cracking. And this is our magnet surface. We'll check that surface for the same issues.Now inside the hub regardless if it's a disc brake, it's a drum brake like this. Or just a standard idler style hub. You're going to have an outer race. Would be right here, it's a small tapered piece of metal your bearing sits in, and rotates on. That's basically the outer portion of the bearing.You have the same thing here on the backside. This is called the inner race. Now if those show any signs of wear, overheating, or cracking. Those are also something we'll need to replace, which we'll show you how to do in just a minute.Now, with your brake assembly exposed, if you do have electric brakes like we have here. It's a good idea to check all the components for wear, cracking, maybe missing pieces. Check your pad thickness to make sure those are in good shape. Basically if you have a non working brake assembly and you put everything back together, you're just going to have to take it apart and do it all over again to get back to the brake assembly. This gives you a really good option to be able to change them out.And most applications are going to use a four, or maybe a five bolt flange to hold them in place. And you'll just remove the lock nuts, or sometimes you'll have a hex nut with a lock washer. You want to remove those, and then simply slide your assembly off after you cut the wiring.The friction material itself should also be checked for any kinds of cracking, or overheating. If you have any grease inside the system at all, it's likely it's gotten on those pads. It's a good idea to get those changed. Now as far as the removal of the races go, it's going to be just the same whether we're using an idler style hub like we have here. A drum brake like we have here. You can basically see where the idler is, here in the middle of the hub. It's going to go all the way around there, and we just have this extra material here to provide our braking surface.Now if you're doing a disc brake style job again, it's going to be just the same here with the races living inside of the actual hub portion. You'll just have the discs there for the brakes to make contact. We're going to use this little bit smaller one, it's a little bit easier to manage to show you how to get these out. We've talked about where the races are. The outer here, the inner being closer to the inside, but on the backside of the race there's a little lip. That lip's meant to stick out just a little bit further than the hub, and provide us an area to put our tool on, and help to drive that out.If you look all the way through there on that inner race, you'll see that little lip that sticks out just from the hub slightly, and it gives us enough area to use our tool on. Now generally to remove these you're going to use a punch, similar to this. Some guys will use a screwdriver. Or a piece of pipe. If you have a piece of pipe that's small enough to fit inside of that diameter, you can take that down through and allow it to rest on that lip.Use our punch, and then just need a hammer. And we'll start working that out. We're going to tap all the way around. Kind of equally, and evenly apply the force to get it to come on out of the bottom for us.You can see now as it starts to come out there's going to be a little gap created between the hub and the race. And we can just keep going, bringing it on out. Then you can inspect the inside of the hub surface there. Make sure no damage or anything has occurred, and repeat that same process for the outer race if you plan on removing and replacing that one.Now in the outer flat edge, you can see we're going to have our tapered edge on this side. If we roll our race over to the flat side, typically there's going to be a manufacturers part number on there. That will help you identify which race it is, that you need to go back in your system. If those are rubbed off, worn off, if you can't read them. You can measure the outside, to outside diameter of the race here. It's a good idea to use a micrometer to get it exact.Now here's your basic micrometer. And again, the outside of the race is what we're going to need to measure. You want to go . I set the thickest point there. Looks like this one's going to be about 1.98. That's going to be the measurement you'll want to supply.Now while we've got this out, let's also look at the proper way to measure our bearing. Instead of the outside for the bearing, we need to measure the inside diameter. That's going to be pretty simple. Let's pull that out, find the largest measurement we can. Which here, looks like it's going to be 1.03. With that information, we'll be able to get the correct bearing, and the correct race, so they'll fit together properly and make a full bearing kit for us.Now here's the race, we're going to show you how to get this put back in. Basically just going to press fit inside of our hubs. We need to get it down on there. Kind of like that. And you'll have a couple options. A lot of times you're going to see do it yourself or at homer, just going to use a wooden block. Just place it on there. That's going to get you started, but at that point you'll struggle in getting it to go all the way down into it's seat.Now to take care of that problem, there are several seal drivers that are available. Seal and race drivers that are available out there on the market. It's designed to fit down inside of our race, inside of our hub and get it down there where it needs to go. This is part number ptw83020, has several different sizes, even if you have multiple trailers it's going to do the job.Now the side with the angle on it, is designed to fit down inside of our race. If we use the other side, that's going to be for driving your seal into place. Just want to hold it, and take it on in with your hammer. You'll see, you just want to insure that our race is all the way up against that line on the hub where it's supposed to mate to.Now when it comes time to pack your bearings you're going to have several different ways of doing this. You can just use your hand, is the traditional method. That's going to be the method probably reserved for the very occasional trailer work kind of situation. If you do it once or twice a year, probably get away with it that way.Next you would go to a, kind of a sandwich funnel style almost. If you look inside of there, you can see the bearing. It's located between the two pieces. Just use a grease gun. Start filling that with grease, and that's going to fill our bearing for us. And the third, with this one you're just going to place your bearing down and in. It should be pretty close to center. And then we've got our cone her that's going to go down and secure that.Now I think this style, wastes a little bit more grease than what this style will. This has a dust cap. You can see, you can keep your grease in there, put your dust cap on there and save it for later use. This will be if your going to do it every couple years. And this particular style would be if you're a more regular user.Let's start by showing you how to use a bearing packer. Similar to this. Again, we've just got our grease inaudible 00:11:07 here on the top. And then just slowly start to fill it. Now I like this style quite a bit. I think even regular users might enjoy it, because you can get a really quick visual look at that bearing. You're not going to have to overdo it, or have to much grease.You can kind of see in there now, we're starting to get grease to come out of it. Couple more pumps, we'll be good. You can see we've got grease coming out all the way around. Where all of our bearings are. Got a little bit of excess there. Just take that around the outside of it. And then we should be able to lift it off. And now you can see what we we're talking about. Just a little bit of excess there, that you're just going to wind up wasting.Now we'll take our bearing, we're going to place it right down in our race. And then we'll cap off the back with our seal. Right now our seal's going to fit in just like our race did. It's going to have a little bit of a pressure fit to it. Now very often in this situation, I see people using the four by four method. Kind of here, just placing that on and tapping it. As an option though, if you do have one of these. You can see that's designed to fit right on the top of the seal. And help drive it in.The biggest thing here is, just going to be getting it driven in squarely. You can see, this side's in a little bit further than this side. I'm going to start this side first. Now since we didn't have the opportunity to show you before, we're going to take a look at pulling a seal. Now this is a seal puller, we carry this on our website part number ptw1219. This is meant to hook underneath the seal. And then you kind of pull up on it, and just like our race you'll have to work all the way around that edge. Just bringing it out a little at a time.If you don't have that available. Another option would be a screwdriver. You just kind of get that under the seal, and turn it. And see, that'll allow you to also pop that out. We've taken care of our race. Our inner bearing. Our seal. The last component, before we put our hub back in place is going to be our outer bearing. Now with this bearing, I'll show you the hand packing method.This is definitely . Slightly dirtier method than the bearing packer. When we get grease on our hand we want to look at the larger side of the bearing. This is the smaller side. We have a larger side In between the inside and outside there's a gap. We can see our rollers in there. We want to grab that, and use that gap and shove grease inside of it. Now this is going to take a little bit, you want to work in the same spot until you get the grease pushed all the way through. We can see on the top there we've got a little bit starting to come through.And once we push it in the bottom, and you see it start coming out the of the top in those little drips, it's going to indicate that, that section's fully packed. Just need to work all the way around their outside edge now and do the same thing. Alright, once that's all the way around . The bearing will be ready for use.Now one more thing I like to do. We can see our inner bearing there, and our outer bearing. Well between the two, got a pretty big gap in there. If you'll take a . Pretty good amount of grease. We're just going to go all the way around. See how we can go all the way around the inside and just line that really well. The more grease we have in here, the less chance we have of any moisture getting in there, which can cause corrosion, rust, pitting. Pretty much things we do not like when it comes to bearings, races, and hubs.Put plenty of grease in there. And then this one does have the easy lube spindle, that'll even fill it in more. Now we can get our assembly slid on. I like to keep my thumbs on that outer bearing, just to prevent it from . inaudible 00:15:28 pushed off there. Now we can put on the original hardware that we removed, in taking off our hub the first time. In our case, we had our washer and our nut.Now most commonly you'll see pliers similar to this being used. We basically want to get that tightened down. Once it's fully tightened down you'll feel some resistance in the hub. We back it off just slightly. That'll give us a little bit more freedom of motion there. Something you don't want however . Is any movement in, or out on your hub. You want to be sure that everything is compressed, and you don't have what's called end play. Which would be the play in and out.Once we've got that set, then you'll put on whatever tight keeper yours came with. Get that put back in place. Now with an easy lube style hub, you're going to place your grease gun on the end, and then you can just fill the remainder of that hub up.Now for your typical applications, you're either going to have a solid cap, or a cap that'll have a rubber plug in it. A solid cap's going to be for an axle without the grease inaudible 00:16:51 here on the end. Goes on there. Just knock it on with your rubber mallet. Same with the one with the plug. Just gives you a removable area there, be able to cap that off.We'll show you how to put that on. Now as alternatives as well, a lot of times on boat trailers and marine kind of situations. You'll see a bearing buddy. This is going to apply a little bit of pressure on the grease, you'll fill it up. This kind of comes out just a little bit. That applies constant pressure on the grease to make sure we don't have any air, or anything like that. Then there is also an oil bath hub available. Now this is going to be for use with seals that are going to be designed specifically for oil bath use. You'll have to change that seal.We're using a double lip seal. There are also single lip seals available. Of course a double lip seal is going to give you just a little additional security. Keep that in mind when you order. But let's get this knocked on there now so you can see how that works. We just want to take the cap, we're going to center it. This is going to be very similar to what we did with the seal. And then just gently start tapping it around the outside. And it'll seep down on there for you.It's really going to be the same thing that you'll do with any of the end caps. Now with this side done, it's a good idea to take care of all the other hubs. Get them all on the same maintenance schedule. And as long as you'll periodically check the grease, take your trailer out for a trip occasionally. Just to keep everything lubricated. It should extend the life of these parts, and give us years of good service.

Customer Satisfaction Score:

Customer Reviews

Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle - RG04-300

Average Customer Rating:  4.8 out of 5 stars   (21 Customer Reviews)

Replaces the oil cap, O-ring, and plug for your Dexter axle. Fits 9,000-lb and 10,000-lb general duty axles manufactured after 7/09.


Ordered the parts by phone. Melissa was highly knowledgeable and extremely professional. Would recommend eTrailer to anyone that needs trailer parts or trailer hitches.


Oil caps are working great. The recommendation to slightly loosen them over the winter months to prevent the cap from cracking is working also.


Great to finally see the oil through clear caps


Could not find replacement Dexter oil cap locally. Nicole T spent some extra time and effort and found exactly what I needed. This is second purchase from etrailer, very pleased.


Great product was the same as factory. Will be order more soon to replace the other three caps on my trailer.


Quality item we ordered seems very good customer service, very helpful and received our items quickly. Very happy with them


This was an easy buying experience. The sales representative was extremely helpful and very patient. I am not the end user for the items I purchased so I can not speak to that but, the service was excellent!



Good product and good price. Easy ordering on line.










Got the product




See what our Experts say about this Redline Trailer Bearings Races Seals Caps

  • Oil Bath Hub Oil Cap for Pre 1996 Quality Axles 3-1/2 x 14 Thread Pitch
    Yes, Redline makes an oil cap for 9K and 10K axles, # RG04-300, that has a thread diameter of 3-1/2" and a thread pitch of 14. This oil cap will fit axles with the one piece hub and drum. You will need a 2-1/2" socket or wrench for installation.
    view full answer...
  • Grease or Oil Bath Hubs For a Boat Trailer
    If your current setup is working well I would recommend you stick with grease hubs. Oil-bath hubs are normally used on heavier duty style trailer axles. They must also be closely watched in situations where the trailer is submerged in water, because the oil will breakdown much faster than grease will when water is introduced. Standard grease filled axles are a better choice because they can be maintained easier. The other problem is that when a seal goes out in a grease hub you can make...
    view full answer...
  • What is the Torque Rating For Oil Cap Kit RG04-300
    For oil cap # RG04-300 I recommend tightening to 20 to 30 foot pounds. Be careful using tools though since the cap is plastic it could break if it is overstressed.
    view full answer...
  • Replacement for Oil Cap 21-88 for 9K, 10K, and 12K Oil Bath Trailer Axle Hubs
    You have found it! Oil cap kit # RG04-300 includes the 21-88 oil cap you are looking for. The plug and o-ring are also included.
    view full answer...
  • Troubleshooting Axle Oil Caps That Crack During Winter Storage Periods in Wisconsin
    The hub oil caps like # RG04-300 that you've purchased from us (thank you!) are made of tough polycarbonate material but since they will not expand and contract at the same rate as iron hubs they may crack under pressure, quite literally as you've experienced, in extreme cold. We have not heard of this issue before, but since you live in the state of Wisconsin, where I have found myself in January on occasion and where winter cold means REALLY cold, I think your remedy is to slightly loosen...
    view full answer...
  • Replacement Trailer Dust Cap/Cover for Dexter 21-88
    The replacement oil bath hub cover for your Dexter 21-88 hubs is the part # RG04-300 that you referenced. Normally you wouldn't use a large socket or wrench to remove these. Most of the time it's easiest to use a large set of channel locks to grab the head head of the cap.
    view full answer...
  • Replacement Threaded Dust Cap Needed with 3.43 Threaded Diameter
    The only time that I've seen a plastic cap is for an oil cap, so for your gooseneck trailer the Dexter Axle Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Axles # RG04-300 should be the right fit as it has a threaded diameter of 3.47". Since the threaded diameters are similar and it's easy to get slightly different measurements in the hundredths place I'm pretty sure that this is what you're looking for. If you have a standard grease cap that has those threaded measurements then we...
    view full answer...
  • What Size Wrench Would Be Needed to Install Oil Cap part # RG04-30
    An adjustable wrench or channel locks could be used to install the 21-88 cap part # RG04-300 that you referenced or you'd need a socket sized 2-1/2 inches.
    view full answer...
  • O-Ring and Wrench For Dexter 21-88 Oil Cap
    The O-Ring comes as part of the Redline # RG04-300 assembly including the cap, plug, and o-ring. We do not carry a special wrench as most users simply put a rag over the cap and lossen with channel lock plyers. I have included a link to this product and a video review.
    view full answer...
  • Towing Capacity for 1995 Dodge Ram 2500 Laramie 2WD and Components Recommended
    From what I could find online, the 1995 Ram 2500 Laramie 2WD will have the following towing capacities based on transmission, engine, and axle ratio. These capacities are for towing at the hitch receiver not 5th wheel or gooseneck towing. 5.2 V-8 max towing capactiy--7700 lb Notes: Requires automatic transmission.Requires 3.55/3.92:1 axle ratio. Requires 7500 lbs. 5.9 V-8 max towing capacity--9100 lb Notes: Requires automatic transmission.Requires 3.54/4.09:1 axle ratio. Requires 8800...
    view full answer...
  • Replacement Oil Cap for 10,000 Pound AL-KO Oil Bath Axles
    The hub is going to require the proper threaded cap so you do not want to force one on that has different threads so you have done good so far. Now we just need to determine if there is a cap that will fit. We have oil cap kit # RG04-250 which fits 10K to 12K AL-KO oil bath axles.
    view full answer...
  • Replacement Oil Bath Cap for AL/KO 10 K Axle w/ 3-3/4 Inch O.D.
    We have exactly what you need. Take a look at part # RG04-250, which is designed for AL/KO 10 or 12K axles and has a 3-3/4 inch outside diameter.
    view full answer...
  • Oil Cap Recommendation for Trailer Hub that Has Thread Diameter of 2-7/8 inches
    Sounds like you are looking for the part # RG04-230 which is an oil cap that has a 2-7/8 inch thread diameter.
    view full answer...
  • How Much Oil Gets Installed into Oil Bath Trailer Hubs
    Basically you fill up the hub as much as you can through the hole in the cap like the part # RG04-300 and once the oil level is at the bottom of the cap hole it's as full as it needs to be.
    view full answer...
  • Which Oil Cap Fits A 10000-12000lb AL-KO Axle?
    I would be happy to help. While we do not have a oil cap that measures 3-5/8" in diameter we do have the Oil Cap Kit # RG04-250 which is designed to fit 10000-12000lb AL-KO axles so it is going to be what you need. This cap measures 3-3/4" so it is 1/8' larger than what you measured but is the only option available for your specific axle. I included a video of the # RG04-250 for you to take a look at
    view full answer...
  • Center Plug for Oil Bath Hubs Availability
    The plug that is included with the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles part # RG04-230, 9,000-lb to 15,000-lb Dexter Axle part # RG04-270 and the 9,000-lb and 10,000-lb Dexter Axle part # RG04-300 is not available individually through our sources. I have linked the options available for you to check out.
    view full answer...
  • Replacement Oil Caps for AL-KO 10,000 lb Axles
    We have what you are seeking. It is the Oil Cap Kit 10-12K # RG04-250. It has an outside diameter of 3-3/4 inches and is specifically designed for 10K and 12K AL-KO/Hayes oil bath axles.
    view full answer...
  • How Much Oil Should be Added to an Oil Lubrication System on Hubs
    Basically you just want to fill the oil, like part # XLPROLUBE, up to where that center plug will fit on the Oil Cap Kit # RG04-300. When using grease to lubricate a hub you want to fill it up completely but with an oil lubrication kit the oil is still a liquid so it will be moving in and out of the bearings while you are driving down the road. Please note that if you are switching from a grease setup to an oil setup that you need to ensure that you clean all of the grease out of your...
    view full answer...
  • How to Determine Towing Capacity for a 1995 Dodge Ram 1500
    The towing capacity for a 1995 Dodge Ram 1500 can range from 3,600 lbs to 8,100 lbs depending on how it is equipped. Since there are several different options your truck could have you will want to check the owners manual of your truck to determine what the towing capacity of your specific vehicle is.
    view full answer...
  • Troubleshooting Oil Leaking from 12,000 lb Axle
    For your 12,000 lb axles with Oil, you either have an oil cap or oil seal leaking. For the oil cap I recommend the Oil Cap Kit for 9K, 10K and 12K Axles # RG04-300. For the replacement oil seal, you most likely need # 10-56 which has an inner diameter of 3.125 and outer diameter of 4.500 inches. Finally, for your oil I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle # XLPROLUBE.
    view full answer...
  • How to Find the Correct Replacement Oil Seal and Oil Cap
    I have a solution for you, but it looks like the oil cap itself is what is cracked and not the oil seal. I recommend taking the cap off and making sure that it's actually the seal and not the cap that is cracked before proceeding any further. Once you determine which part is actually damaged, you'll need to take some measurements on the inner and outer diameter (oil seals) or just the outer diameter (oil caps) to determine which replacement part you need. An oil seal like the Redline...
    view full answer...
    Image 1 for
  • Troubleshooting Oil Leaking from 10,000 Pound Axles
    You either have an oil cap or oil seal leaking on your 10,000 lb axles. I would start by checking the seal. For the replacement oil seal, you most likely need # 10-56 which has an inner diameter of 3.125 and outer diameter of 4.500 inches. I recommend measuring the inner diameter of your current seal to verify that this fits. For a replacement oil cap you will want to measure the outer diameter of your current oil cap. For example, if you have a 3.5" outer diameter you would need the...
    view full answer...
  • Bearing, Races, and Cap for 10,000 lb Dexter Axle
    The bearings you need are # 387A and # 25580. Races needed are # 382A and # 25520. The oil cap kit you need is part # RG04-300. If you need a seal too you would need the part # 10-51.
    view full answer...
  • Replacement Oil Seal and O-Ring for Dexter Drum Hub with Oil Bath
    The Dexter Trailer Hub and Drum Assembly - 9,000-lb to 10,000-lb - 8 on 6-1/2 - Oil Bath - Non-ABS Drum # 8-430-5UC3 does have replacement parts so you can absolutely purchase the seal and o-ring separately from the entire hub. The seal is the Unitized Oil Seal # 10-51 and the o-ring is # 92127. If you want the entire too the Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle # RG04-300 consists of the cap, the plug, and the o-ring. If you need more oil, I recommend the Kodiak...
    view full answer...

< Previous

Do you have a question about this Trailer Bearings Races Seals Cap?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer bearings races seals cap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924