bing tracking image
  1. Lubricants Sealants Adhesives
  2. LubriMatic
  3. Brake and Bearing Grease
  4. Grease
  5. Standard Lithium Grease
  6. 14 oz
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
LubriMatic

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

Part Number: L11390
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$13.90
Retail:$20.95
You Save: 34%
Lubricants Sealants Adhesives
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge. Fastest Shipping and Great prices for LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge. Read our customer reviews of LubriMatic lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number L11390 by LubriMatic online at etrailer.com.
  • All Info
  • Reviews (229)
  • Q & A (0)
  • Videos (1)
  • Photos

LubriMatic Lubricants Sealants Adhesives - L11390

  • Brake and Bearing Grease
  • Grease
  • Standard Lithium Grease
  • 14 oz
  • LubriMatic
  • Lithium Complex

Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge.


  • Industrial and agricultural lithium complex formula
    • Ideal under temperature and pressure extremes, shock loads and high wear situations
  • Superior adhesion to bearing and moving parts
  • Highly water insoluble
  • Rated GC-LB by NGLI
    • NGLI #2, drop points 500 degrees Fahrenheit


11390 LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

Replaces LubriMatic L10320





Video of LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Review LubriMatic LMX Industrial Strength Grease

Customer Satisfaction Score:


Customer Reviews

LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge - L11390

Average Customer Rating:  4.8 out of 5 stars   (229 Customer Reviews)

Formulated to endure extreme pressure, outrageous heat or cold, as well as intense wear and tear. LMX "Red" Grease will fuse to bearings and other moving parts without breaking down when exposed to water. 14 oz. Cartridge.

by:

Five stars given based on the lightning fast shipping process, as I have not yet used the items ordered. If possible I’ll follow up with my opinion of the ez lube grease gun and grease I purchased for my Holmes single axle trailer.



by:

The highly recommened " red" bearing grease! Perfect for
boat trailers that are put into water from timevto time



by:

Good stuff



by:

I haven't used the product yet, but shipping was very fast and packaging was good....



by:

Great product fast delivery



by:

Just repacked bearings with new seals on my 4' x 8' folding utility trailer. Customer service was great in helping me with selecting the right parts including cotter pins. All is good now. I have been ordering from etrailer for 10 + years. Great place with great people!

Skip P. profile picture

Skip P.

8/2/2021

good product, no issues



by:

Worked as needed



by:

works great



by:

Always a good product



by:

Keeps everything that needs lubricant on our 40ft gooseneck operating smoothly.



by:

just received and have not used it yet. I will use on all my equipment as I get ready for spring work.



by:

Good Day. So I,m not quite sure what happened to my grease. The shipping box is in perfect condition, however the contents are destroyed. All 4 tubes of grease are damaged, and not useable. Again the shipping box is perfect. Kinda weird. I really need this grease to service my trailer, I had planned pre trip maintenance for today. So I guess you can see that really messes up my schedule, asI have to take the trailer out of storage, and take it to my shop for servicing. Very time consuming. Please help ! Thanks.

Jenny N. profile picture
Etrailer Expert

Jenny N.

2/9/2022

I will have our customer service team reach out to you.



by:

Worked very well. On a difficulty scale of 1-10, with 10 being the hardest, this was a 3.



by:

As always fast in great condition an it works!



by:

was just what I expected. Now along with the Bearing Buddies I can keep the bearings on my trailer greased.

Lynn Y. profile picture

Lynn Y.

5/13/2018

All is great with red grease and bearing buddies



by:

I have put over 4,000 miles on my 7,000 lb travel trailer since I replaced the bearings and lubricated them with Lubrimatic LMX grease purchased from etrailer.com.

The bearings have performed without any issues. I have since done a minor re-tightening of the bearing castle nuts. Of the 4 wheels, only one needed re-tightening.

I recommend this product without hesitation!



by:

I just received and used the Lubrimatic LMX grease, so I can only comment that it looks like a high quality product. I did want to comment that I was using it to pack 4 Dexter 3500lbs EZ-lube spindles/bearings, and 14oz was barely adequate. I was short a couple pumps of the grease gun. So my advice is to figure on 3 spindles per tube, or maybe to be more precise: number of spindles you can do = 4 x #LMXtubes - 1. You may need some extra for maintenance in any case.



by:

The connection (wire to taillight) for this trailer light kit is extremely flimsy and clearly not intended for external mounting. I ended up reordering submersible tail lights to get a more rugged connection. The wiring harness is fine and the tail lights work but the connection is flimsy.

It's very inexpensive but a few dollars more for a more rugged set of lights is probably a better buy.



by:

Perfect replacement for my trailer. etrailer is only place I buy trailer related parts from. Always excellent service. Fastest shipping in the industry.



by:

Will was super helpful in tracking down the correct grease seals for my old Coleman camper. It was great to be able to talk to a live body and get real time advice. Products arrived promptly. Score another win for eTrailer.



by:

All parts arrived quickly and fit perfect! I bought a used car trailer few months ago and brakes quit working. Pulled drums and needed new magnets, it was missing spring on one side, prior owner must have got some bad service. E-Trialer hooked me up with all the parts, also ordered hub seals and grease and repacked bearings. Thank you !!!



by:

Perfect just what I needed



by:

Haven’t had a chance to use the grease but it was recommended by a Rv mobile tech I know. The 5 star review is for eTrailer’s customer support. I ordered two tubes and one of them arrived with the top crushed. They sent a follow up email the day after it arrived wanting to know if I received the package and was pleased. In my reply I explained what happened and sent a pic asking if they could help. Within a week I had a new tube of grease at no cost to me! Sure don’t find customer service like that too often these days. Thanks eTrailer….you guys rock!



by:

Grease came quickly and in time for a bearing job swap. The tube I ordered had a small ding which didn't allow me to use my grease gun but Carol and the team at eTrailer took care of me and sent out a different tube quick. Crisis adverted. Thank you much! The grease itself is of high quality and I wouldn't use anything different.



by:

Its grease that works well. Notes from etrailer indicate you need one of these per wheel for filling fresh from the factory. I only needed one per axle (½ per wheel) . Looks like I have a lifetime supply of wheel grease :)


25
229
Show More Reviews

See what our Experts say about this LubriMatic Lubricants Sealants Adhesives

  • Replacing Lippert Equa-Flex Equalizers With MORryde CRE3000 Equalizers
    You currently have the Equa-Flex Cushioned Equalizers # LC279687 used with your Lippert axles. We do have the MORryde Rubber Equalizers # MR87ZR that you can use to replace your current equalizers. These have 3" of travel and are rated for axles up to 8,000lbs. When you do replace them I recommend adding the MORryde Suspension Upgrade Kit # MR46ZR to upgrade the mounting hardware to wet bolts. The wet bolts will allow the suspension system to be able to cycle more effectively. I recommend...
    view full answer...
    Image 1 for
  • Comparing Lippert Equa-Flex Cushioned Equalizers # LC279688 and # LC145546
    The Equa-Flex Cushioned Equalizers # LC145546 that includes the 4 wet bolts has greaseable pivot points. This means you can replace the lower bolts that hold the pivot arms in place and replace them with the 4 wet bolts. This kit is rated for 5,000lb to 8,000lb trailer applications. The Equa-Flex Cushioned Equalizers # LC279688 does not have greaseable pivot points and is rated for 6,000lb to 8,000lb trailer applications. Beyond those differences these are the same size with a 4" bolt...
    view full answer...
  • Does The Lippert Wet Bolt Kit For Road Armor Equalizers Require Bronze Bushings?
    The Lippert AP Kit # LC52SV for the Road Armor Shock Absorbing Equalizer # LC696740 does not come with bronze bushings. It is recommended to use Bronze Bushings # K71-291-00 when using a wet bolt as if you have nylon bushings it can deteriorate the bushing. The equalizer will come with bronze bushings already installed. If your leaf springs have damaged bushings or nylon bushing you will need to order the bushings above which includes 4, enough for 2 leaf springs. A tandem axle trailer...
    view full answer...
  • Replacement Bearing Kit for a Dexter 4,400 lbs Axle
    The correct bearing kit for a Dexter 4,400 lbs axle is item # BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item # L68149, inner race item # L68111, outer bearing item # L44649, outer race item # L44610, grease seal item # 58846, and finally a cotter pin an tang washer. These bearing kits are sold individually and you will need one per hub. I have linked an installation video below. I recommend using LubriMatic...
    view full answer...
  • Replacement Bearing Kit For a Dexter 8-259 Idler Hub
    Your Dexter 8-259 # 8-259-5UC1 will use the Bearing Kit # BK1-150 for each hub. I recommend filling the bearings with the Grease # L11390 when you install them.
    view full answer...
  • Are the MORryde Wet Bolts Compatible With Equa-Flex Equalizers on 2018 Momentum 395M?
    Yes, you will be able to use the MORryde Suspension Upgrade Kit # MR86ZR with the Equa-Flex Cushioned Equalizers # LC279689 on your 2018 Grand Design Momentum 395M. I do recommend using the LubriMatic LMX Industrial Strength Grease # L11390 with a Grease Gun # L30416 to fill the wet bolts. I prefer this grease as it is specifically designed to work well in both hot and cold climates. It also will not wash away as easily when driving in wet conditions. The grease gun has a flexible hose...
    view full answer...
  • Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
    Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item # L11390 that comes with the CE Smith Trailer Idler Hub Assembly item # CE13515. You can use your blue marine grease but you can't mix the two.
    view full answer...
  • Filling Hub With Grease That Has a Grease Zerk Outside The Hub
    On a hub like the CE Smith Trailer Hub Assembly # CE13511 with a grease zerk on the hub you will remove the grease cap. You will then use your Grease Gun # L30416 to fill the hub with Grease # L11390 until you see it filling the entire hub and covering the spindle nut. Be sure to also watch the grease seal on the back of the hub to ensure that grease does not push through the grease seal. If you see grease pushing past the seal before it reaches the spindle nut you will have a damaged...
    view full answer...
  • What Brand/Kind Of Grease Is Compatible With The Pre-Greased Hubs AKHD-550-35-K
    The grease that comes in our pre-greased hubs like the # AKHD-550-35-K is a lithium based grease. For bearing grease I recommend either the LubriMatic Multi-purpose lithium grease # L11315 or the LubriMatic LMX Industrial Strength Grease # L11390. This is what we generally use when we install bearings at our shop here in Missouri. That said, grease does not need to be brand specific, and you can use any lithium based bearing grease.
    view full answer...
  • Recommended Shocks and Equalizer Upgrade For a 2017 Grand Design Imagine 2600RB Travel Trailer
    I recommend using the Roadmaster Comfort Ride Shock Absorbers # RM-2450 and the MORryde AllTrek 4000 Equalizers # MR29DR on your 2017 Grand Design Imagine 2600RB travel trailer. These will fit your 3,500lb axles and replace your stock equalizer. You will also want to upgrade your shackles to the MORryde Suspension Upgrade Kit # MR76ZR. I recommend using the Grease # L11390 and a Grease Gun # L30416 for the wet bolts. This grease is more resistant to water than other types of grease and...
    view full answer...
  • Replacement Bearing Kit With Bearing Buddy Bearing Protectors To Replace Triton 07994-P Kit
    The Triton kit 07994-P is going to contain the same parts as 2 of our Bearing Kits # BK1-150, Grease Caps # RG04-020, EZ Caps # RG04-040 and a Grease Tube # L11390. Their kit appears to use the same TRP bearings and races as our kit. Since you are looking to switch to the Bearing Buddy Bearing Protectors # BB1980A-SS you will be able to use them with 2 of our Bearing Kits # BK1-150 and Grease # L11390. You will need a Grease Gun # L30416 to fill the hubs through the Bearing Buddy units....
    view full answer...
  • Recommended Grease For Lippert Road Armor Equalizer Wet Bolts
    I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 on the Wet Bolts # LC52SV for the Road Armor Shock Absorbing Equalizer Kit # LC696740. This grease is formulated for superior performance in cold and hot climates. It is also highly water insoluble so it will not wash away when driven in the rain. The Grease Gun # L30416 with its pistol grip and flexible hose will make filling the wet bolts much easier. Be sure to verify your leaf springs use Bronze Bushings # K71-291-00...
    view full answer...
  • Replacement Hub and Bearing Kit For a Carry On Trailer With Dexter 8-259 Idler Hubs
    It sounds like you are looking for the Dexter 8-259 # 8-259-5UC1 hub. If you only need the internals it will use the Bearing Kit # BK1-150 for each hub. The bearing kit includes new bearings, races and a grease seal for 1 hub. I recommend filling the bearings with the Grease # L11390 when you install them.
    view full answer...
  • Replacement Bearings, Races, Grease Seal and Tools Needed For Dexter 8-283 Brake Drum/Hubs
    Your Dexter 8-283 brake drum will use a # 10-42 grease seal. If you are looking to replace all the races, bearings and seals you will want the following components per hub. Inner Bearing # LM67048 Inner Race # LM67010 Outer Bearing # L44649 Outer Race # L44610 Grease Seal # 10-42 We do have the following tools to make the replacement easier. Seal Puller # PTW1219 Install Kit # PTW83020 Bearing Packer # PTW1218 Grease # L11390 Grease Gun # L30416
    view full answer...
    Image 1 for
  • Dexter E-Z Flex Suspension Equalizer and Wet Bolts For a 2019 Coachmen Freedom Express Blast 17BLSE
    The Dexter E-Z Flex Suspension Kit # K71-652-00 you found is the correct system to use on your 2019 Coachmen Freedom Express Blast 17BLSE travel trailer toy hauler. This kit will include the equalizers along with new shackles and wet bolts. I recommend using the Grease # L11390 with these parts since it is highly resistant to water and good for use in extreme heat and cold. The Grease Gun # L30416 having the rubber hose will make it easier to reach all the different grease zerks to properly...
    view full answer...
  • Replacement Grease Seal and Bearing Kit for a 5,200LB Dexter Axle On a 2021 Reflection 303RLS RV
    Thank you for the image of your axle tag. Your Dexter 5,200lb axle uses a Grease Seal # GS-2250DL. We do have this as a Pair # RG06-070 for both of the hubs on one axle. We also have the Bearing Kit # BK3-300 that will include the bearings along with races and a grease seal for one of your hubs. I recommend keeping one of these along with Grease # L11390 in your 2021 Grand Design Reflection 303RLS 5th wheel just in case you have a bearing go out on a road trip.
    view full answer...
    Image 1 for
  • Recommended Bearing Kit for a 2012 Forest River R-Pod 177
    For your 2012 Forest River R-Pod 177 the correct bearing kit is item # BK2-100. This kit is for a Lippert 4,400 lbs axle and includes inner bearing item # L68149, inner race item # L68111, outer bearing item # L44649, outer race item # L44610, grease seal item # 58846, and a cotter pin and a tang washer. You will need two of these per axle. You will also want to get some LMX Red Grease item # L11390 to repack your bearings. If you need a grease gun you will want to use item # L30200 and...
    view full answer...
  • Replacement Bearings and Brakes for 2016 Riverside Retro 195
    It is probably worth pulling the assemblies and inspecting them but realistically yes, I would go ahead and replace the brakes. You might as well check out your drums too and make sure they don't have grooves worn in them. Based on what I was able to find, it looks like your 2016 Riverside Retro 195 has 3,500 lb axles. I recommend checking the axle tag to verify this information. Assuming that is correct, you can use the Electric Trailer Brake Kit # AKEBRK-35-SA you were looking at. These...
    view full answer...
  • Wet Bolt Kit Needed To Install Lippert Road Armor On 2020 Highland Ridge Open Range Light 295BHS 5TH
    To install the Road Armor Shock Absorbing Equalizer # LC696740 on your 2020 Highland Ridge Open Range Light 295BHS 5th wheel camper, you will need the Upgrade Kit # MR76ZR. This kit will contain heavy duty shackles, wet bolts and bronze bushings. I recommend filling your wet bolts with the Grease # L11390 using a Grease Gun # 30-807 with a flexible hose.
    view full answer...
  • Hub Fit For 2,000 lb Dexter EZ-Lube Axle & Trailer Tire & 12 Wheel With 5 on 4-1/2 Bolt Pattern
    Thanks for all that info and yes, we can absolutely get you the correct hub for your Dexter 2,000 lb EZ-Lube axle that will accept a 12 inch wheel (which would be appropriate since it has the correct load rating). The correct hub is the following: - Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-EZ-2K This comes with the bearings, races, and grease seal so you don't have to purchase those separately. While it comes pre-greased, just for the future, if you happen to...
    view full answer...
  • Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
    It does look like you have shackle straps that are to long and possibly worn out bushings. You can replace your shackles with the 2-1/4" Shackle # LC122487. You will need 8 of these for the entire trailer. I would recommend pulling a couple of the Shackle Bolts # TRFA73Z916DLNZ to determine if they or the Nylon Bushings # TRBU11566 are worn and causing extra clearance which may explain if this is something that just started happening recently. You will need 14 of the bushings and 8 bolt...
    view full answer...
    Image 1 for
  • Is Calcium Sulfonate Complex Grease Compatible w/ Lithium Grease?
    You're good Joe! Calcium sulfonate complex grease is compatible with the lithium grease like item # L11390, that Dexter uses.
    view full answer...
  • Replacement Bearings and Suspension Components For a 2016 Forest River Wildwood X-Lite 261BH
    If you are just going to be cleaning your hubs and packing the bearings with fresh Grease # L11390 you will want a set of Seals # RG06-050 for each of your 3,500lb axles. The Seal Puller # PTW1219 will make removing the seals easier once you have your hubs removed. We do offer the Bearing Packer # L70025 which will allow you to more easily squeeze the fresh grease into the bearings with the aid of a Grease Gun # L30416. If you wish to install new bearings and races you will need 4 of...
    view full answer...
  • Does The MORryde Suspension Upgrade Kit # MR58ZR Contain Wet Bolts For All The Hangers?
    Yes, the MORryde Suspension Upgrade Kit # MR58ZR does include wet bolts for the front, rear and center hangers as well as the the wet bolts for the shackles. Do be sure you have the correct track style hangers as this kit has the longer bolts those hangers require. If you do not have correct track hangers you want to use the Kit # MR46ZR as it has the shorter bolts for standard hangers. I recommend using the Grease # L11390 with a grease gun like the # L30416 which makes it easier access...
    view full answer...


< Previous
123. . .20



Do you have a question about this Lubricants Sealants Adhesive?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.