RV Landing Gear Switch - 12V - White

Video Transcript for Review of JR Products 12V White RV Landing Gear Switch - JR34FR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this white 12 volt RV landing gear switch. This is a great replacement for your extend/retract switch on your 5th wheel or trailer jack. This is going to have the momentary on/off and momentary on options for you. You can see this as a nice white color, so it should blend in really well with your current setup. This is going to have a power draw of 16 amps at 125 volts alternating current, 15 amps at 125 volts of alternating current, 10 amps at 250 volts, and 30 amps at 12 volts.

This does meet the UL, CSA, CUL, and IP55 RoHS standards, so you can trust it is gonna do a great job for you, get the job done, and hold up well for you for a long time to come. It's also made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. As far as our measurements go, if we measure just the switch body here without those tabs that will hold it in place, we're gonna be looking at right about 1 7/16 of an inch by approximately 13/16 or just shy of that 7/8 of an inch mark. If we measure the switch itself, we're gonna be right at 1 3/16 by, we'll call it 3/4 of an inch there, so plenty of room to easily reach over and select the direction that you're wanting your jack to travel. This does have the diodes on the backside here.

The packaging has a very easy diagram to follow when you're getting this wired up, so you can make sure that you're getting everything connected in the right place. So very, very simple to get installed and to use for your 5th wheel or trailer jack if you're needing to replace that 12 volt switch. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..