To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2008 Nissan Altima, we're gonna be test fitting Inno Square bar roof rack system consisting of part numbers, INB117. These are the Inno Square Crossbars, 46 inches long, part number INSUT, these are Inno Feet for the Square Crossbars and finally part number INK116. This is the custom Fit Kit for the Inno Roof Rack System. The Inno Square Bar Roof Rack System is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. This can carry anything from bike racks to cargo baskets to cargo boxes. While the Square Bars are strong and sturdy, they are gonna make some noise while you drive.
Etrailer.com does carry a wide variety of Fairings that you could attach to these bars to help cut down that noise while you drive. This is very easy to install, it simply clamps around your existing doorframe and has padding where it's gonna make contact with the roof so it's not gonna have any scratches or abrasions on it while you travel.This is rubber coated, the clamp is and that's also to help protect your vehicle. The end caps do come with these locks included for anti theft and these also serve as integrated turn knobs to tighten this up against your roof as well. Now to give you a couple quick measurements, from the center of the roof to the bottom of the bar is gonna be two and three quarter inches from the center to the top is gonna be three and three quarter inches, so that's more than enough space for your accessories to wrap around your bars to be attached without damaging your roof. Now the carrying capacity for the roof rack is gonna be 220 pounds, however you always want to double check with your vehicles' manufacturers recommendations before you place anything on there to make sure it can withstand those weights.
Now that we've gone over some of the features of the roof rack system, lets go ahead and show you how it installs.We already have our front bar installed on our vehicle and we'll show you how we got the measurements for that a little bit later. We have our rear bar partially assembled on our table here. We'll finish this up and then we'll start installing it on our vehicle. So we'll first place our foot on and to open up the portion where our square bar's gonna fit through, you just push down on the lever there, you can kinda see it on the inside here where that moves so you can move it back and forth on the bar. Measure out how far we need to go forward.
And this is gonna be in your instructions but it's actually gonna be as a measurement from the end of one bar to the end of the other. All right, with everything measured out properly, we'll take our end cap and that just pushes into place. And we'll flip it upside down and start installing our Fit Kit. Start by putting our rubber pad into place, matches up at the bottom there and it just pushes in.These are numbered, so just be sure you're putting the right pad in the right place according to the instructions. And finally, we'll install our clamp.
We'll start by removing the end cap here and just twist it right off like so, and we'll remove our bracket. Now we can place our clamp on like so, put our bracket back in place. You want to make sure it stays in this position even as you tighten it down on the vehicle. And then we'll just loosely place our end cap back on. Now we're ready to set this on our vehicle, we'll start by opening up the doors and taking some measurements. How we got the front bar into it's position, I measured from the center of the door jamb to the center of the front bar. When we place the rear bar in place, we'll go from the rear door jamb to the back.I measure that out on both sides to keep it even. With that done, we'll tighten up our end cap until our clamp is just snug around our door jamb. We'll do that on both sides and then we'll go back and forth and tighten it down evenly. Once it's nice and tight, we'll push in on our end cap, line it up with the hole at the top here. Push that in, and lock it into place. Now we're ready to load up our gear and hit the road. And there you have it for the Inno Square Bar Roof Rack System on our 2008 Nissan Altima.
Average Customer Rating: 4.7 out of 5 stars (300 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.I got the whole kit...on Marc C's recommendation. He was so very patient and helpful! The kit is great. I am not so versed in doing such things so my neighbor put it on the car for me. He was just over and over again extolling the Praises of the instructions. He said they're the best ones he ever used. It fits on the car, it feels solid, and it looks great. I'm very very happy with it. Thank you so much!
What a valuable resource this has been for us. We have used it for hauling lumber, hay, ladders and tables......Great product thanks!
Easy to install and use. Great value. However, fairly noisy on the highway on our Mini Cooper when the rack is empty… but you get used to it.
Heather A - 03/08/2022Fit was good. Hauled a roof top carrier 2000 miles with no issues. Wind noise was minimal.
One of the lesser expensive rack kits for the Mazda5. etrailer delivered excellent! They had items in stock and shipped quick. I finally had a chance to install it this evening. My only frustration was evening out the bars. Measure, adjust and measure and adjust. I'll look into getting a fairing to reduce wind noise.
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
I was really pleased with the price and how quickly my crossbars arrived. Also, being able to access the installation guide on the website was awesome because the instructions that came in the box were more general.
It fit my 2012 Hyundai Accent great the only reason I give 4 stars is its is load going down the road
Very easy to install, work exactly like it's supposed to be.
Easy to install. Installed with the wife in about 30 minutes with the Inno foot pads. No wind noise.
Great product. As described and easy to install. 1 year on, still looks and works great.
Great Product! Shipping was very fast for free shipping, and product was packaged well. Installation was a breeze, and only took about 30 min. I am very pleased with my purchase!
Easy ordering with all the parts needed already calculated! Decent price and fast shipping. Very pleased!
excellent quality
Fits perfectly
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
I occasionally carry building materials that are too large for the inside of the vehicle and this roof rack is sturdy and attractive. The square bars are strong, and the connectors are easy to attach and remove on the factory roof rails. Etrailer.com is the best!
I have only had these on for a few days but all seems well. Very little extra noise although I can hear a bit when I'm going over 100 km/h but nothing too bad at all. Installation was extremely simple and straight forward. Took me all of 20 minutes and most of that was just making sure the cross bars were exactly parallel. These shipped to my house (just outside of Toronto) in around 4 days with no extra border fees which was fantastic. I only wanted these to strap a canoe onto the roof of my Jeep Cherokee Trailhawk so I didnt need anything too heavy duty or bulky and this fits the bill perfectly.
Followed the instructions and everything fit perfectly. No guessing at what goes where. Set up and installed in about 30 minutes.
Easy to mount and dismount, shipping was fine.
At first we didn’t think it was going to fit. We were getting nerves but after we got it on the car and figured it out it was great! Fits excellent makes no noise at all! Next will be trying a trip with the kayaks.
It arrived with all its parts and all in good shape. Instructions for assembly were clear and it fit the car as needed. Since, it has done everything expected of it.
Peter - 04/05/2019Arrived quicker than i expected. Product is easy and simple to assemble and use. Great quality for lower price range.
I love it it’s nicely made and worth the money. Thank you for everything including the early delivery.
solid good quality
Great product. I would give it 5 stars if it were easier to take on and off. It can't go through car washes, and there's a bit of measuring invoked to get it back on. That could and up being a hassle. Still from what I can see, it's the best product out there in it's price range.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.