Demco Autoslide Locking Plate for Trailair Tri-Glide Pin Boxes

See what our Experts say about this Demco Accessories and Parts

• Is Special Plate Required To Use Flex Air Trail Air 5th Wheel Pin Box With Demco Autoslider Hitch
  To upgrade to the Demco Hijacker Autoslide 5th Wheel Trailer Hitch like Item # DM8550022, you will need the Demco Hijacker Autoslide Locking Plate for Trailair, Item # DM6095. This plate will prevent the king pin from rotating inside your Demco Hijacker Autoslide fifth-wheel hitch. Hardware is included.
  view full answer...
• 5th Wheel Hitch Recommendation For A 2018 Ford F-350 Short Bed With Prep Package
  For your 2018 Ford F-350 short bed with the factory hitch prep package, the Demco Hijacker AutoSlide Hitch, Item # DM8550038, will work well for you. It is a confirmed fit for the 4 receiver puck system in your truck and will automatically slide back when you are in a tight turn to give the clearance you need. You will need locking plates to use a Trailair pin box like the Demco Hijacker Autoslide Locking Plate, Item # DM6095. With regards to maintenance, follow the guidelines in the...
  view full answer...
• Does Demco Hijacker Fifth Wheel Hitch Require Special Capture Plate with Trailair Pin Box
  As long as the pin box is just the standard Trailair you don't need a special capture plate. If instead it's a RotaFlex Trailair you'd need the part # DM6171 or if it's a Tri-Glide part # DM6095.
  view full answer...
• Can Demco Hijacker Fifth Wheel be Used with Trailair Pin Box
  Yes, a Demco Hijacker # DM8550034 can be used with the Trailair cushioned pin boxes without the use of an adapter. As long as it's not a FlexAir pin box you would be fine.
  view full answer...
• Availability of Demco Hijacker Autoslide Locking Plate for MOR/ryde Pin Box
  The difference between the Demco Hijacker Autoslide Locking Plate # DM6025 and # DM6095 is the pin box they are each designed to work with. The # DM6025 is compatible with MOR/ryde pin boxes like what you have on your trailer, while the # DM6095 is designed to work with the Trailair Tri-Glide pin boxes. As you mentioned, the locking plate will prevent the king pin from pivoting inside your Demco Autoslide fifth wheel trailer hitch. It is a simple, bolt-on installation and all the necessary...
  view full answer...
• Locking Plate for Demco Hijacker Autoslide 5th Wheel Hitch and Trailair Tri-Glide
  What I think you are asking for is the Demco Hijacker Autoslide Locking Plate for Trailair Tri-Glide Pin Boxes, # DM6095. If you bolt this locking plate to the Trailair Tri-Glide pin box it prevents the king pin from being able to pivot in the Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider, # DM8550024. This is a simple bolt-on installation and the needed hardware is included.
  view full answer...
• Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Lube Plate
  You would not need a lube plate with a Demco HiJacker Autosliding 5th wheel trailer hitch because the hitch head will turn with the trailer pin box. The locking plate # DM6095 has a piece on the bottom that wedges into the hitch head funnel. Then the force of making the turn will rotate the head and engage the auto-sliding feature.
  view full answer...
• How Much Does the 18K Demco Hijacker Autosliding 5th Wheel Hitch # DM8550022 Weigh
  If your 2013 Ford F-250/F-350 has the 6-3/4 bed you can use the Underbed Rail and Installation Kit # DM8551000 so that you can use the 18K Demco Hijacker Autosliding 5th Wheel Hitch # DM8550022 that you referenced. The Demco Hijacker # DM8550022 weighs about 280 lbs. The head can be removed (which weighs about 62 lbs) to help make lifting the hitch a little easier though. If you have a standard Lippert 1621 pin box then no plate is needed for hooking up your trailer. The capture brackets...
  view full answer...
• Is Locking Adapter Plate Needed for Demco Hijacker Autoslide on 2006 Ford F-250
  The Demco Hijacker Autoslide Locking Plate # DM6095 referenced in your question works with just the Tri-Glide model of the Trailair Pin Boxes. It is required for the Tri-Glide design in particular because the 3 steel rods on this model act as rollers, letting the bottom jaw glide forward and back during towing. The locking plate is needed with the Demco Hijacker Autoslide # DM8550022 to prevent the king pin from rotating inside the trailer hitch. If your existing pin box is not the Tri...
  view full answer...
• Is a Wedge Available for a Trailair Pin Box to Use with the Demco Hijacker Autoslide 5th Wheel Hitch
  Although there are some wedges that Demco offers to use in conjunction with the Demco Hijacker Autoslide, like part # DM8550035, the wedges are made for specific specialty pin boxes and won't work with a standard pin box. For a standard pin box you need to use the capture brackets that already come with your 5th wheel hitch. If you want to upgrade your pin box to one that uses an air bag or shock to help enhance your towing experience just let me know what your pin box number is (like...
  view full answer...
• Is an Adapter Needed to Use a Trailair 5th Wheel Pin Box with the Demco Hijacker Autoslide
  Yes, in order to use your Trailair 5th Wheel Pin Box with the Demco Hijacker Autoslide 5th Wheel Trailer Hitch part # DM8550035 you will need to use one of the following capture/locking plates. If you have a Rota-Flex or Flex Air then you will need to use the Demco Hijacker Autoslide Capture Plate part # DM6171 but if you have the Tri-Glide then you will need to use the Demco Hijacker Autoslide Capture Plate part # DM6095.
  view full answer...
• TrailAir Pin Box for Lippert 1621HD and Locking Plate for Demco Hijacker 5th Wheel Trailer Hitch
  I believe you have a Lippert 1621HD and if that is the case then you can use Trailair pin box # LC158778. Then, for a Demco Hijakcer 5th wheel trailer hitch you would need locking plate # DM6095. I have included some links to videos and installation details for the 2 products for you.
  view full answer...
• Recommended 5th Wheel Hitch for 2019 Nissan Titan XD Short Bed with OEM Integrated Gooseneck
  Your 2002 Keystone 5th wheel with Trailair pin box is a nice feature. We currently only have a few confirmed fit options for your 2019 Nissan Titan XD with OEM Integrated Gooseneck. My recommendation is the Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package - 21,000 lbs # DM6200 to give you the rails and then use the Demco Hijacker Autoslide hitch. This hitch is available in two sizes; the 18,000 lb # DM8550034 and the 21,000 lb # DM8550035. This automatic...
  view full answer...
• Cannot Adjust Capture Plates To 1/8 Inches On Demco Hijacker Autoslide
  The Demco Hijacker Autoslide 5th Wheel Trailer Hitches like part # DM8550034 are really only designed for pin boxes 12-14" wide. If you have a pin box that is narrower than this then the capture plate system would not be used but instead a wedge. The wedges however are pin box specific so I would need to know exactly what pin box you have in order to recommend a wedge. I have attached some options below: Standard 5th Airborne Pin Box Wedge part # DM6026 Extended 5th Airborne Pin Box Wedge...
  view full answer...
• Compatible Locking Plates For the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider
  The price of the locking plates for the Demco Hijacker Autoslide 5th Wheel Hitches will depend on the locking plate that you need. I've listed all of the locking plates and the pin boxes that they work with below: Demco Hijacker Autoslide Locking Plate for MOR/ryde Pin Boxes # DM6025 Demco Hijacker Autoslide Locking Plate for Trailair Tri-Glide Pin Boxes # DM6095 Demco Hijacker Autoslide Locking Plate for Standard 5th Airborne Pin Boxes # DM6026 Demco Hijacker Autoslide Locking Plate...
  view full answer...
• Locking Plates for Demco Hijacker Autoslide
  The locking plates for the Demco Hijacker Autoslide are needed for the following cushioned pin boxes: Glide Ride, Mor Ryde, Trailair Tri Glide, Trailair Flexair, Rota Flex, and 5th Airborne. So the correct one will depend on your pin box. We have the following plates depending on what pin box you have: # DM6036 for Demco Glide Ride pin boxes # DM76FR for Lippert Rhino pin boxes # DM6095 for Trailair Tri-Glide pin boxes # DM6025 for MOR/ryde pin boxes # DM6026 for standard-length 5th...
  view full answer...
• Best Sliding 5TH Wheel Hitch For a 2022 Ford F-350 6-3/4' Short Bed
  The Demco Hijacker Autoslide 5th Wheel Hitch # DM8550038 is the best sliding 5th wheel hitch that will fit into your factory prep/puck system on your 2022 Ford F-350. As an auto-sliding hitch you will no longer need to get out and unlock your hitch to move it from maneuvering to towing positions when you need to make tight turns. The hitch will move itself back up to 14" when you turn to ensure you do not damage your truck and 5th wheel trailer. There are some non standard pin boxes that...
  view full answer...
• Best Auto Slide 5TH Wheel Hitch For a 2022 Ford F-250 Super Duty With Factory Hitch Prep/Puck System
  I recommend using the Demco Hijacker Autoslide 5th Wheel Hitch # DM8550038 for your 2022 Ford F-250 Super Duty with the factory prep/puck system and the short bed. This autosliding hitch will work with no adapters required on most campers that use a standard 12" to 14" wide pin box. For some cushioned pin boxes you will need the corresponding adapter plate for that pin box. Here is a list of the most common pin boxes that require an adapter. Demco Hijacker Autoslide Capture Plates for...
  view full answer...
• Is a Locking Plate Needed for a Demco Hijacker Autoslide 5th Wheel Trailer Hitch
  The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part # DM8550034 works with most standard pin boxes for the exception of Sidewinder or Revolution's. However, if you have one of the following pin boxes: Glide Ride, Mor Ryde, Trailair Tri Glide, Trailair Flexair, Rota Flex, and 5th Airborne then you will need a locking plate to prevent the kingpin from rotating inside your hitch. I have attached the correct locking plates for the above pin boxes for you below. MOR/ryde Pin...
  view full answer...
• Demco Hijacker Autoslide Capture Plates and Locking Plates for Pin Box Model Compatibility
  There are some king pin models that require a specific capture plate or adapter for use with the Demco Hijacker Autoslide 5th wheel hitches. Here is a list: Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes # DM6171 Demco Hijacker Autoslide Locking Plate for MOR/ryde Pin Boxes # DM6025 Demco Hijacker Autoslide Locking Plate for Demco Glide Ride Pin Boxes # DM6036 Demco Hijacker Autoslide Locking Plate for Trailair Tri-Glide Pin Boxes # DM6095 Demco Hijacker Autoslide...
  view full answer...
• Recommended 5th Wheel Hitch For a Short Bed 2022 Ford F-250 w/ Prep/Puck In Bed Hitch System
  I recommend the Demco Hijacker Autoslide 5th Wheel Hitch # DM8550024 for your 2022 Ford F-250. This hitch will drop into the factory prep/puck system and the auto sliding 5th wheel hitch will keep you from having to get out of your truck to reposition the hitch for maneuvering. The hitch is rated for up to 18,000lbs trailer capacity and 4,500lbs of maximum tongue weight. This hitch will fit most pin boxes that are 12" - 14" wide but you may need a separate locking plate if you have a specialty...
  view full answer...
• Installation of Locking Plate for AirRide Pin Box with Demco 5th Wheel AutoSlide Hitch
  The instructions state that with the use of the Demco Adapter Plate # DM6095 the locking plates on hitch head are not needed when using this kit. They can be extended all the way out or removed. Per Demco the # DM6095 is only compatible with the Trailair Tri-Glide Pin Boxes. I really like the Demco Hijacker's AutoSlide technology because you never have to get in or out of your bed to adjust the hitch from towing to turning, it just automatically takes care of it for you. The Demco AutoSlide...
  view full answer...
• Demco Hijacker Autoslide Fifth Wheel Trailer Hitch with Air Cushioned Pin Boxes
  The Demco Hijacker Autoslide # DM8550034 is a sliding fifth wheel trailer hitch which you may need with a 6 foot bed. The advantage of the Hijacker over most hitches is that it slides automatically when turning so you don't need to get out of your truck and manually activate the sliding feature. To install the Hijacker in your 2004 Dodge Ram use the install kit # DM8552015-71. The Demco is fine to tow trailers that has a standard pin however you will need a different locking plate if...
  view full answer...
• Best Sliding 5TH Wheel Trailer Hitch For a 2022 Ford F-250/F350 With Factory Prep/Puck Package
  I recommend the Demco Hijacker as being the best 5th wheel hitch for your 2022 Ford F-250. This hitch is available in 2 weight ratings based on the 5th wheel you will be hauling. 18,000LB Demco Hijacker # DM8550024 21,000LB Demco Hijacker # DM8550038 Both of these are auto-sliding hitches so you can stay in your truck instead of having to deal with unlocking and locking in receiver that is needed with a manual slider. They will drop into your factory prep/puck holes in your bed for a...
  view full answer...

Do you have a question about this Accessories and Part?