To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located on the driver's side and passenger's side of your rear cargo area. You will have to remove the floor coverings and storage trays to access these connection points. Once you've plugged in the T-connector, locate the single-pin connector on your tail light wiring harness and plug in the single-pin connector on the T-connector. Then locate the fuse box under your vehicle's hood and plug in the provided fuse.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (190 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Easy to install and perfect fit both the hitch and wiring.
See my review regarding the entire Curt hitch system that was posted a moment ago. That review similarly applies to the wiring harness system in every respect. The instructions for the wiring harness installation were spot on and everything one needs to install it were included. Great and fast service from etrailer.com.
Delivered ahead of time in perfect condition. The wiring harness was very easy to install.
First of all the service and staff was excellent. I ordered the receiver and wiring on Thursday and it arrived Tuesday evening.
This was a simple installation and took about 15 minutes. Installed on brand new 2015 Nissan Murano. Putting the tiny tie wraps on took more time than anything. I wish the trailer lead plugged into the module l so one could easily route wire to remain outside the vehicle. But if you don't tow all the time it is not a big deal.
The installation of the 75952 receiver took about 20 minutes. I used my motorcycle jack to raise receiver into proximity position then caught a bolt on each side so I could remove jack. Good thing I still had my torque wrench and kreeper from my racing days. You can rent or borrow a torque wrench at A******* A*** if you don't have one.
I did back my car up on a couple Rhino ramps to give me plenty of room to work. Overall I am very pleased with this product and installation. I saved $245 by buying from etrailer and installing myself. I had 2 other hitches including another Murano installed and I am kicking myself I did not do this before.
With the money I saved I can put new tires on my Goldwing! :) Great Job etrailer!!
Wendell H - 02/09/2018Not yet installed, but having done several on friends and my own vehicles, I know installing the wiring kit will be the harder part of the installation of a hitch package. All of the wiring kits I have installed work perfectly.
Worked perfect. I'll never pay someone to install hitches and integrated lights again as it was so easy to watch installation video and instructions and DIY it!
Easy to install. Directions were fantastic. Works like new after one year!
Good instructions, good product. Hardest removing trim pins, thank YouTube.
This receiver and trailer wiring harness connector have been doing well. I’ve used my trailer with this self-installed etrailer equipment with no issues. I’m a repeat etrailer.com customer and like this past purchase, have been very satisfied with the high product quality and service. And, pricing has been the best around.
Joe - 10/20/2021Super Easy install and instructions were spot on. Instructional videos are very thorough. I absolutely advise you take the time to make sure the threads are clean as suggested in the video. This will make starting the bolts much easier. The passenger side is a bit tight with regard to maneuvering the hitch into place. Can't believe some of the quotes I got from local retailers to install (with all respect to their expertise and business acumen).
Perfect compatibility and an easy installation. The video instruction was excellent. Works great with my trailer.
Fast delivery Great price and tons of info on installation
15 minutes installing this on a 2019 Murano
The Murano had a fuse installed from the factory under towing
This was my fourth time buying from etrailer and they always satisfied my needs. This was so simple to install. They are always great to deal with.
This product installs so simple and easy. Highly recommend it.
Bill - 12/01/2021Easy installation with clear instructions.
Connectors snap right in place with plenty of extra wire to work out routing.
Although the installation instructions don’t mention it, there’s an extra (larger) ring connector in the kit that was useful in attaching the ground wire to an existing frame bolt.
Very impressed with this wiring harness kit!! It included everything needed for a successful install. No splicing required. The instructions with illustrations were perfect for our 2018 Nissan Murano.
Super easy and perfect fit. Great instructions. I needed a bigger ground connector and it was included!
Easy install. Better than other brand I installed on a different vehicle.
Very easy to install Instructions were clear.
Very easy to install!
Loved that I didn't have to run a wire to the battery, was able to find a way to route wires to outside and use mounting brackets for clean installation. Again videos are a huge help and accurate
Installing it was simple and fits excel lent
Excellent product. Instructions were easy to follow, had harness installed in a very short time. After a year everything is still working great. Great price too. Highly recommend this.
Very satisfied with the wiring harness kit. Everything needed was included and the directions made installation easy.
Every thing was GREAT.. Could not have gone any better..Me being 85 years young
installed the wiring Harness in about 1 hour and my Son did the Hitch in about
20 Minutes..All done without any trouble at all,and it looks as if was done by
a professional..Thanks E-TRAILER for a very good Product..
Plug n play
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.