1. Trailer Hitch
  2. Curt
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 1500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11510
lowest price pledge
Retail:$294.52
Our Price: $171.97
You Save: $122.55
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 28 lbs
Quantity: 
In Stock
Trailer Hitch C11510 - 150 lbs TW - Curt
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11510 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (31)
  • Q & A (34)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C11510

  • Class I
  • 1-1/4 Inch Hitch
  • 1500 lbs GTW
  • Curt
  • Concealed Cross Tube
  • 150 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 1,500 lbs
    • Maximum tongue weight: 150 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11510 Curt Class 1 Trailer Hitch Receiver

Installation Details C11510 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11510

Average Customer Rating:  4.7 out of 5 stars   (31 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

- C11510
by:
2002 Ford F-350, 450, and 550 Cab and Chassis

The hitch fit as advertised. Easy install. Instructions and videos from etrailer were great. I use this hitch primarily for my Thule platform bicycle carrier. It works great!


Comments
After a year of use, the hitch works well. The hitch is used on my Infiniti EX-35 to carry a Thule platform bike rack. Its very stable, Im pleased with it.
Chuck W - 11/24/2020


- C11510
by:
2015 Ford Flex

Great well made quality product. I installed it myself on my 2015 Infiniti QX50 about 5 times!! The holes did not line up perfectly and it was discouraging. I emailed eTrailer with pictures and was informed that every hitch has a flex in it which can be adjusted using 1 of several flex methods. The also gave me the option of a replacement which I took them up on. Unfortunately, I had the same issue with the holes not lining up by at least a ¼ inch. I called them for the flex methods which they emailed to me and I was able to use the jack method to stretch it. This was also a difficult process as it takes a lot of pressure. A jack and a 4x4 do not easily want to stay in position….it’s awkward and not like jacking up a car. I actually drilled a hole in the bottom of the 4x4 which I placed over the exhaust mount to keep it from slipping on one end. I actually totally bent my scissor car jack and I had to buy a larger more durable one to complete the task. When I extended it about an inch it would go right back to the original position. I had to apply enough force to flex about 1 and ¾ inches and when released I seemed to have my ¼ inch that I was looking for. After multiple trials of getting it back in place and bringing it back down, everything finally lined up. eTrailer is great to work with and they are very accommodating. I highly recommend them. It was just a challenge to flex it and take it on and off so many times. My first attempt took me about 3-4 hours and a good deal of that time was trying to get the holes to line up. Dropping the exhaust is really simple but trying to get the hitch into place is challenging by yourself. This is where a second set of hands had would help a lot. By the 3rd time, I was pretty good at knowing how to maneuver it into the correct position. Although the total time for me was about 10 hours, I’m pretty sure I could do the whole thing again myself in 2 hours or less assuming everything lines up. My biggest recommendation to anyone installing this is that if the holes don’t line up when you put it up, don’t waste any more time. Immediately take it down and try one of the flex methods until the holes line up.



- C11510
by:
2013 Infiniti EX37

This was a well-made product. Fit and finish were very good. I installed it myself on an InfinitiEX37 2013. I did the install using a set of ramps and a creeper. The total install time was about four hours. The clearances for this hitch are very tight on this model. However final if it was very good and the bolt holes lined up so that all bolts could be started by hand. I read a prior review about the bolt holes not matching up but that was not the case for me. The hardest part of the install being the hitchinsertion, because there is a very narrow path of insertion due to the tight clearances. Again remembering I did this by myself lying on the garage floor. If you have access to a lift and a second pair of hands I believe the installation could easily be done in a couple of hours. The intended use for my hitch is for a bicycle rack and for this purpose it works perfectly. It is very low profile and tucks under the body panel very nicely with no ground clearance issues. I would recommend this prpduct.



- C11510
by:

Hitch does what is advertised. Installation was a bit tricky due to the exhaust system but after that, all parts fit easily. A great (and maybe only) choice for QX-50 owners.


Comments
Has worked out fine. Major take away is to use the strap. I’ve used the hitch without a strap once or twice and have experienced excessive swinging. The strap eliminates the problem.
Pat W - 04/10/2021


- C11510
by:

I was lucky I had no rust and all parts that needed to be removed and they came out quickly. The install video is a great help. Very good tips. I wrestled with it a bit as it was only me. I was challenged with connecting the rubber muffler mounts once inverted and muscling the muffler back and forth.. I accidently flipped one back and didn't notice on install and installed it wrong.. corrected that and was good to go. The holes on the hitch did not line up just right but I was able to make that work. I wish i had read how to flex it into place with a hydraulic jack.. oh well. Good looking, quality product. Looks very good and low key when installed. I'm just an ok mechanic.. i would set aside an hour and a half - two hours, clean up include. Got it to run my Thule 4 bike rack but have not it fit that yet as I am waiting for a 7" extender so it will clear the door without having to fold the rack down. I will also be getting an ATV/UTV 1 1/4" to 2" hitch riser (8"), 100lb capacity (not sold here) for a cargo carrier rack to rise above the exhaust so I can run a cooler and maybe some firewood in the summer for car camping. Makes a handy table for parking lot parties as well. Great product.. thanks etrailer.com!



- C11510
by:
Subaru

This is the third or fourth hitch receiver, which two of them were for Subaru WRX Wagons, I’ve ordered from eTrailer. It’s still working great, and I will order another unit from them for my next car.



- C11510
by:
2016 Infiniti QX50

Super quick, easy process. Received the hitch within one week.



- C11510
by:
2010 Infiniti EX35

I have ordered hitches from etrailer before. Like the others, this one is well-made and seems very robust. I saw a lot of reviews commenting on lengthy install times. I watched the online video, and cannot emphasize enough how helpful it is to understand the installation. I got mine done in about 90 minutes. Not too bad at all, and I had no problems with hole alignment.


Comments
Its been a year now, I have pulled a couple of ATVs about 2500 miles with no issues. I checked the screws at the end of the season and all were still right. The hitch is working well for me.
Ross - 01/29/2020



- C11510
by:
2008 Infiniti EX35

All but one hole lined up. Not to hard to install



- C11510
by:

Is a total pain to install. You’re going to need multiple jacks to install this. More people doesn’t really help because the car is so low when you drop the muffler it’s basically on top of you and now you’re trying to lift the hitch up then the muffler and bolt everything back up. After much frustration I got it installed in a little over in hour. It holds the bike carrier pretty well.


Comments
If possible, backing the vehicle up onto ramps is really the way to go here. Its also important that the front wheels are chocked while the vehicle is up on ramps. Once this is done, there is plenty of access.
-- Etrailer Expert Mike L - 04/03/2019


- C11510
by:

Good fast services. Not as easy install as thought bit overall good clean tucked away product .



- C11510
by:
Infiniti EX35

etrailer did a great job on ordering and delivery. However, the Curt hitch didn't fit my Infiniti EX35 as advertised. I had to drill out the holes to bolt to my car. Several hours of hard work drilling the "no drill" hitch.


Comments
Was the hole misalignment sited in this review an anomaly or has etrailer addressed and corrected the problem?
-- comment by: Keith G - 03/02/2014

As far as we know, this was just an anomoly with either that particular hitch or that particular EX35. Curt, the manufacturer, has not issued any bulletins about this hitch either. If you have one of these hitches and are having difficulty installing, feel free to give us a call at 1-800-298-8924.

-- Etrailer Expert Patrick B - 3/3/2014


- C11510
by:
2017 Infiniti QX50

I started out looking for a hitch for my new 2017 QX50, and this is the only option I can find. However, despite it being the only option it is definitely a wonderfully built hitch that is made in America. It bolted right up to my existing mounting holes & welded bolts with a little "convincing" with a rubber mallet. The job is done easiest by fully dropping the muffler. I understand why an earlier reviewer said he had to drill out the holes, however I bet if he did a little more fitting, drilling would not have had to be done. This hitch even cleared my aftermarket top speed pro-1 axle back exhaust system I added. I was worried it would not clear however, it all fit wonderfully!!! the hitch pokes out just below the bottom of the bumper, and only displays what is necessary for trailer hook up. I will say that the clearance for the hitch pin is very small. I could not get the stock pin and clip to work, so an aftermarket flush mount locking pin will have to do. All in all, the hitch took about an hour and a half to install, by myself, and with all the proper tools. Would def recommend.



- C11510
by:
Pontiac Trans Sport Van

I bought this a little over a year ago for my daughter who was going off to college and needed a way to attach a bike rack to her mini SUV so that she could transport her bike cruiser bike anywhere. I was a little skeptical at first about how sturdy this would be and if it would even work. I'm glad I made the purchase because this thing works great. Its held up well after all this time. She frequently uses it to transport her bike and hook it up to small trailers. We're both happy with the purchase.



- C11510
by:
2011 Infiniti EX35

I installed this hitch on my 2011 Infiniti EX35 in a little over a couple hours. The etrailer video was very helpful and accurate. It sure made the job much easier than just using the instructions from Curt. I am using this hitch for a Kuat platform bike rack and it does the trick! Thanks for everyone's help at etrailer!



- C11510
by:
Infiniti QX50

ordered trailer hitch for my new infinity gx50, had it installed the next day and then purchased a new bike rack . I will use it for long weekends on the New Jersey Shore. So far, great experience with etrailer.. good advise on the phone



- C11510
by:
2008 Infiniti EX35

An exceptional job of packing my shipment. I couldn't have packed it any better myself. Have not installed the hitch yet, but all parts look to be of exceptional quality. The fact that installation instructions are included with this correspondance is also exceptional.Can't wait to get this on my EX 35 and see how well it does.



- C11510
by:

Great Quality product. Shipped very quickly and was well packed and in great condition when received. I haven't installed the trailer Hitch yet but I can say that eTrailer has been excellent at communicating with me and making sure that I understood the current status of my order straight through to front door delivery. Best part of it was the shipping was free. Now that is a great deal. I would recommend eTrailer to anyone needing an aftermarket trailer part.



- C11510
by:
2011 Infiniti EX35

The product was exact fit for my car ( 2011 Infiniti Ex 35). Shipping was fast. I will tow a trailer tomorrow and hopefully everything works out find.



- C11510
by:

Unfortunately, I received a damaged unit...however, etrailer quickly processed a return and continue to follow-up and continue to keep me updated with the refund process. Great service!



- C11510
by:
Infiniti

This is a great hitch I'm totally happy with. It's been great since my mechanic installed it. I drive a 2015 Infiniti qx50



- C11510
by:

This is the third time I've used eTrailer.com to purchase the right hitch for my vehicles. Great products and great service each time! This Curt hitch was no different.



- C11510
by:

A perfect fit , I took to pep boys $50 for the installation.



- C11510
by:

Product is a good fit. Thanks for all the info supplied on the I-net.



- C11510
by:

Came quickly and they also matched the lowest price I found.


27
33
Show More Reviews

Ask the Experts about this Curt Trailer Hitch

  • Cargo and Bike Carrying Recommendations for a 2014 Infiniti Q50
    At this time the only option I can offer for carrying any type of cargo on your 2014 Infinity Q50 would be roof rack options. For that you would want the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR56QR as at this time there are no hitches available for your 2014 Q50. The Curt hitch part # C11510 that you referenced is designed for 2014 Infiniti QX50's. If you were only looking to carry a couple bikes there are trunk mounted bike racks available. For that I would recommend the...
    view full answer...
  • Trailer Hitch Receiver Recommendation for 2011 Infinity EX35
    You are correct, Infinity does not recommend trailer towing due to the added stress that it puts on the vehicle. I can not recommend doing anything that would contradict this. Although the EX35 is not recommended for towing, Curt has designed a trailer hitch for the 2011 Infiniti EX35. The Trailer Hitch Receiver, # C11510, bolts to the frame of the EX35 with no welding required. This is a Class I hitch receiver and has a maximum towing capacity of 1,500 pounds and a maximum tongue...
    view full answer...
  • How to Use a Bike Rack for a 2 Inch Hitch Receiver on a 2017 Infiniti QX50 with 1-1/4 Inch Receiver
    Currently, the only hitch available for your 2017 Infiniti QX50 is the Curt # C11510 which is a Class I, 1-1/4 inch hitch receiver. Depending on how much weight you're putting on the hitch (Weight of your bike plus your bike rack) you may be able to use an expander. The Tow Ready # 80303 will adapt the 1-1/4 inch hitch to a 2 inch hitch. However, using the adapter will drop your tongue weight by 50 percent. You should know that Curt requires the use of a support strap, # 18050,...
    view full answer...
  • Availability of Trailer Hitch for 2019 Infiniti QX50
    I checked with both Draw-Tite and Curt and unfortunately there is not a trailer hitch available for your 2019 Infiniti QX50. It looks like a trailer hitch has not been available for the Infiniti QX50 since 2017, so the likelihood that one will be available in the future for your 2019 model is pretty slim. If you are wanting a way to transport your bikes your best option is going to be with a trunk-mount carrier. I recommend taking a look at the Yakima FullBack 2-Bike # Y02634 or 3-Bike...
    view full answer...
  • Exhaust Pipes Seem to Hang Lower After Curt Hitch Installation on 2016 Infiniti QX 50
    According to Curt, when installing the Curt Hitch, # C11510 on a 2016 Infiniti QX50, you have to invert the rubber isolators for the exhaust system when reconnecting the exhaust mount to the hitch. If you failed to invert these rubber isolators, then it is possible that you vehicle's exhaust pipes might very well hang lower than they originally were mounted. Maybe as much as an 1-1/2 inch lower. I would double check or even invert theses hangers then reinstall the exhaust to see if...
    view full answer...
  • Is Class III Trailer Hitch Available for a 2015 Infiniti QX50
    The only trailer hitch designed for your 2015 Infiniti QX50 is the Curt # C11510 which is a Class I rated hitch with a 1-1/4" receiver. So unfortunately there are no Class III trailer hitches that fit a 2015 QX50. If you let me know what you plan on using the trailer hitch for I can make some recommendations for you.
    view full answer...
    Image 1 for
  • Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2016 Infiniti QX50
    We do have the parts to carry a bike rack and tow a trailer that fit your 2016 Infiniti QX50. However, if Infiniti says you can't do one or the other then I can't recommend against them. They're the ones that determine the capabilities of your vehicle and will also be the ones deciding whether you were compliant with their warranty guidelines in the event there's an issue later on. The hitch receiver we carry that fits your Infiniti whether you have 2-wheel or all-wheel drive is the...
    view full answer...
  • Trailer Hitch for a 2015 Infiniti QX50
    Yes! For your 2015 Infiniti QX50 I recommend Curt trailer hitch # C11510. This is a Class I trailer hitch with a 1-1/4 inch receiver. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load...
    view full answer...
  • Hitch Installed on 2016 Infiniti QX60 Rattling on Exhaust
    What you describe is a fairly common occurrence. Because the # C11510 hitch mounts to fixed mounting points on your 2016 Infiniti QX50, that hitch is going to sit in the same exact spot on every US Market 2016 Infiniti QX50. However, because the exhaust system uses flexible rubber isolators and easily bendable exhaust hangers, the precise location of the exhaust pipe where it runs next to the hitch can vary from vehicle to vehicle, sometimes by an inch or more. Typically, fixing the problem...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Infiniti EX35
    We have not had the chance to install Curt trailer hitch # C11510 on a vehicle which is why there isn't a video. But I have included a link to the installation instructions for you. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap #...
    view full answer...
  • How Does the Curt Class I Trailer Hitch # 11510 Install on a 2012 Infiniti EX35
    I have attached a link to the installation instructions for the Curt Class I Trailer Hitch, # 11510, for your 2012 Infiniti EX35 on this answer page for you to check out. The installation process for this hitch does not require any welding or drilling, but you will have to lower the exhaust to install the hitch. This hitch comes with all of the installation hardware and it will bolt into pre-existing holes in your vehicles frame. Curt estimates that it will take the average person...
    view full answer...
  • Trailer Hitch fit for 2016 Infiniti QX50
    In regards to your first question, the Curt Trailer Hitch # C11510 that fits your 2016 Infiniti QX50 weighs 29 lbs according to the manufacturer. This hitch - as well as many others - requires the temporary lowering of your exhaust to install but it should in not rattle on your muffler. The only reason I can think of why this may have happened is if the hitch bolts were loose for some reason or the muffler was not lifted back up into place like it should have been. We have not heard...
    view full answer...
  • Is There a 2" Hitch Reciever Available for the 2010 Infiniti EX35
    I have a solution for you, but there are no 2" hitches available for your 2010 Infiniti EX35 and even if you used a hitch adapter like the Brophy # HTAD it would reduce the tongue weight capacity by 50% down to 75-lbs total for the carrier and bikes. If you're only carrying 1 bike and a very light weight carrier this may work for you. The best solution would be to go with a bike rack that will fit on a 1-1/4" hitch like the Curt # C11510. If you wanted to get a new rack that would fit...
    view full answer...
  • Is Wiring Harness Needed for 2014 Infiniti QX60?
    You would need wiring harness # 119250KIT for your 2014 Infiniti QX60 only to power lights on an accessory that would go into your vehicle's trailer hitch. The hitch available for your '14 Infiniti only has a Class I hitch available, the Curt # C11510, and according to your owner's manual, this vehicle should not be used for towing so the wiring would only be needed if you were to use a cargo carrier, for example, that had lights that needed to be plugged in. The harness that fits your...
    view full answer...
  • Best Hitch Recommendation for a 2015 Infiniti QX50
    The Curt Hitch part # C11510 that you referenced has been confirmed to fit your 2015 Infiniti QX50 so I would recommend it for you. For a ball mount you would want the part # C45521, 1-7/8 hitch ball # 19256, and 2 inch ball # 19258.
    view full answer...
  • Required Bike Rack Stabilizing Strap For CURT Hitch # 11510 on a 2011 Infiniti EX-35
    The strap you will need is the CURT bike rack strap with cambuckle, part # 18050. CURT requires using a stabilizing strap with any hitch mounted bike rack or hitch accessories. The strap acts as a precaution to reduce jarring and torque applied to the hitch from the weight of the bike rack and bicycles. Since the CURT hitch # 11510 is a Class I model, you will need to make sure your bike rack is compatible with Class I hitches. You will also be limited to carrying 2 bikes.
    view full answer...
  • Is There a 2" Trailer Hitch for a 2017 Infiniti QX50
    The only available trailer hitch option we have for a 2017 Infiniti QX50 is the Curt Trailer Hitch Receiver part # C11510 which has a 1-1/4" receiver tube opening. If you require a 2" receiver tube opening then the only option is an adapter like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD. Please note, the adapters do reduce capacity so you will need to keep that in mind.
    view full answer...
  • Trailer Hitch Receiver for Bike Rack on 2016 Infiniti QX50
    Yes, the Curt # C11510 is the only trailer hitch receiver we carry for the 2016 Infiniti QX50 and Curt does require using a support strap, # 18050, when carrying a bike rack. The strap has a hook that will fit in the seam of your rear hatch. The Thule Helium Pro # TH9042PRO is a great bike rack and has a hand knob to secure the rack to your Infiniti's hitch but Curt still requires the strap.
    view full answer...
  • Will the Curt Trailer Hitch # C11510 Fit a 2019 Infiniti QX50
    The Curt Trailer Hitch # C11510 that you referenced fits up to a 2017 Infiniti QX50 but unfortunately it will not fit your 2019 Infiniti QX50. As of right now we don't have any trailer hitches that fit your vehicle, but we do have alternative ways to transport cargo. If you can let me know what you are wanting to carry I can see if we have anything that will accommodate you. If you are needing a trailer hitch we should have some fits out in the near future once our manufacturers can...
    view full answer...
  • Hitch and Trailer Wiring Recommendation for a 2011 Infiniti EX35 Journey
    For a hitch for your 2011 Infiniti EX35 you would want the Curt hitch part # C11510 as long as you have a Journey model. The recommended trailer wiring is the part # 119179KIT. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the...
    view full answer...
  • What is the Weight and Size of the Box the Curt 11510 Hitch for 2015 Infiniti QX50 Is Shipped In
    The weight of the Curt # C11510 is roughly 28-lbs when shipped. The size of the box this is shipped in is 45" long x 23" tall x 8" wide.
    view full answer...
  • Can Kuat Sherpa be Used in Curt Hitch for 2011 Infiniti EX35
    The Kuat Sherpa part # SH12G can fit Class I hitches like the Curt # C11510 which is a fit for your 2011 Infiniti EX35. With this style of rack the use of the # 18050 can be a challenge but we have seen people run it to the bike's frame or even to the base of the bike rack and it's good by Curt's standards.
    view full answer...
  • Hitch-Mounted Bike Rack Recommendation for 2010 Infinity EX35 With Class l Hitch
    The Softride Dura Assist bike rack you mentioned is intended to be used with 1-1/4 inch Class ll and above hitches. There are a few options for bike racks to consider. I have attached some help articles which will assist you in choosing a bike rack which is best suited for you. I recommend the Thule Doubletrack Pro XT bike carrier, part # TH92BJ. This rack would work with your installed hitch as well, provided the clearance is sufficient. This rack has a folding feature, which allows...
    view full answer...
  • Compatibility of Thule TH903202 EasyFold XT Bike Rack With 2017 Infiniti QX50
    The Thule # TH903202 EasyFold XT would work perfectly in the Curt Class I hitch, part # C11510 IF the combined weight of the bikes and the 45 lb bike rack is less than the hitch's 150 lb tongue weight capacity. The rack itself weighs 45 lbs, which would leave you 105 lbs capacity remaining for the bikes. According to the Rad Power Bikes website, the City weighs 64 lbs and the Mission weighs 48. If you can reduce the weight of the bikes by removing the batteries before placing them on...
    view full answer...
  • Trunk Mounted Bike Rack for a 2006 Toyota Corolla and a 2015 Infiniti QX50 with a Spoiler
    For the 2006 Toyota Corolla, the Thule Raceway Pro Platform, part # TH9003PRO will work. However, you will not be able to open the trunk as the tension required to keep the rack positioned will change as the rack moves with the trunk lid, risking damage to the rack and the vehicle. For the 2015 Infiniti QX50 with a spoiler, the Raceway Pro rack is not a fit as the factory spoiler cannot support the weight of the rack's support straps. I checked through all of the owner's manuals for...
    view full answer...
  • Hitch and Bike Rack Recommendation for a 2016 Infiniti QX50
    Just looking at the picture of your car I could see how the Hollywood Racks # HRF2-3 SHOULD easily fit. But without them confirming the fit we can't safely make that recommendation. I have a much better solution that will avoid all of this though. A hitch mounted bike rack will provide you with a much more secure attachment and won't touch the painted surfaces. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Roadway 2 part # TH912XTR. We...
    view full answer...
  • Curt Hitch and Rola Bike Rack Recommendation for a Infiniti EX35
    I contacted Thule and they informed me that since your 2011 Infiniti EX35 has a spoiler on it you would not be able to install a trunk mounted bike rack like the Thule Gateway 3 Bike Carrier # TH9007XT that you referenced. Since you were already considering installing a hitch and using a hitch mounted bike rack I would recommend you go that route. The recommended hitch for your vehicle is the Curt Trailer Hitch # 11510. However, since the only hitch available for your vehicle is a...
    view full answer...
  • Recommendation for Transporting Wheelchair with 2008 Infiniti EX35
    I may have a solution for you, however a trunk bike rack cannot be used to safely transport a wheelchair on your 2008 Infiniti EX35. To transport your wheelchair, I recommend looking at a hitch-mounted cargo carrier. The Curt Class I Receiver Hitch # C11510 is confirmed to fit your Infiniti EX35 and will provide a Class I, 1-1/4 inch hitch opening to be used with compatible hitch-mounted accessories. This has a 150 pound tongue weight capacity and a 1,500 pound towing weight capacity,...
    view full answer...
  • 2015 Infiniti QX50 Hitch Receiver And Bike Combination
    The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4", part # C11510, is your only hitch receiver option for this vehicle. You can use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver, part # HTAD, in order for your hitch receiver to be compatible with your bike rack. With the adapter this hitch receiver can still work with a Class III bike rack, but with limited capability. The use of this adapter will reduce your maximum tongue weight on your rack by 50%. That new maximum...
    view full answer...
  • Bolt On Hitch and 1 1/4 to 2 Inch Adapter For 2016 Infiniti QX50 AWD HOLD
    The only hitch we have available to fit your 2016 Infiniti QX50 AWD is the Curt Trailer Hitch Receiver # C11510. This hitch has a 1-1/4" receiver. it is a bolt-on installation with no welding required. The complete hardware kit and installation instructions included. If you want to carry your 2" bike carrier, I recommend # HTAD. Please note: The tongue weight capacity of hitch will be reduced by 50% with use of adapter. Please confirm vehicle towing capacity with your owners manual....
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.