bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11377
Our Price: $166.28
You Save: $52.35
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 23 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11377 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (116)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - C11377

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • CURT
  • Visible Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

11377 Curt Class 1 Trailer Hitch Receiver

Installation Details C11377 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11377

Average Customer Rating:  4.8 out of 5 stars   (116 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


This is on a 2018 Mazda 3 hatchback. I give it 5 stars. And One can get it installed alone. Just one little thing, it was a bit tight. I had to "stretch" one side to line up the bolts. to do this I installed one side loosely and then got one the other side and pulled and shook until the bolts dropped through the holes. Also, as you can see in a couple of pictures you will need to relocate at wire during install. I popped in out, stowed it and then clipped in back in.

2018 Mazda 3

The hitch receiver is great quality and looks good in my mazda 3 2018 hashback. Installation instruction was clear and easy to fallow it cleary indicates you need two people for easy installation, but unfortunately I did not have anyone available, so I ended up doing the installation by myself and still was moderate job (60 minutes). A little delay with shipping which is not etrailer fault, but their customer service was great and helped me duringbthe process until finally received my order. Overall good quality part and great service.


So far so good. Install on my Mazda 3 hatchback was easier with my dad. Look up “how to remove rubber isolators” to make sure you have the hardware at home. Everything else came with the kit. You’ve got to be careful with the bolts or you’ll lose them inside your frame.

I haven’t towed yet for two reasons:
1. 1-1/4” receiver size isn’t the most common, so I’m ordering a fitting part from etrailer.
2. This product doesn’t include a wiring kit (some others do).

I don’t get under my car often, so it was kind of a fun job. Aligning the hitch to the car’s frame was a challenge. Easier with 2 people.

2017 Mazda 3

Shipping was prompt. Despite very little apparent damage to the box, the hitch had a few deep scratches and chips. I repaired these with black touch-up paint, but it shouldn't arrive like this. It would be nice if the mounting hardware (bolts and flat brackets) were stainless steel. Installation certainly requires the removal of the four rubber exhaust hangers. Use a jack stand under the main pipe to lower the muffler about two inches. The installation will be very difficult if attempted alone because the hitch has to be carefully moved into position and then the bolts to which guide wires are affixed have to be threaded through the holes on the brackets of the hitch.
The fit is good on a 2017 Mazda3 hatchback. Equal clearance all around and no interference with the exhaust pipes or bumper. Appearance wise, I think the Curt looks better than the Drawtite which a friend of mine has on his Mazda3.

2015 Mazda 3

My search for a hitch led me right to etrailer, and the selection and ordering process was a breeze. Shipping was very prompt and the installation process was relatively straightforward. The online video was helpful, but I own the hatchback model so there are a few differences I had to figure out. Some basic bicycle lubricant helped to free the muffler mounts so I could access the mounting points. The only thing I was not able to do on my own was touque the bolts due to the tight clearance of laying under my car, which was expected. The hitch preformed well with the bike carrier I own and I hardly notice the hitch with out the rack on board. Definitely a quality product at a great price and I would certainly recommend etrailer.

2016 Mazda 3

The curt trailer looks very beaten up and worn down. As if someone had it for years. Sadly, can't return it due to myself moving soon and I wouldn't want them to resell something I traveled with over 2,000 miles. While it works it is NOT in new condition.

2014 Mazda 3

I was just recently able to attempt installing my new equipment, but unfortunately it does not fit my vehicle.

I have a 2014 Mazda3 Hatchback, which this item is listed as fitting, but as you can see in the pictures the bolt holes are much farther apart on the equipment than on the vehicle.

It appears to have the correct product number which I ordered except that this item us not designed with a C as listed online.

Please advise on how to rectify the issue.

There is another hole in the frame member on the other side of the exhaust mount shown in your photo. The hole could be covered with a plastic plug, tape or undercoating, you might need to take a putty knife to the underside of the frame member to scrape away any undercoat or grime that might be covering the mounting hole.
-- Etrailer Expert Mike L - 01/30/2019

2014 Mazda 3

Instructions were good, install was easy, required no drilling or cutting for my application; 2104 Mazda 3 hatchback.

Removing the exhaust hangers was easy using a spray solution of water and dish soap, I used a cambuckle type of tie down hooked to the suspension to raise and lower the exhaust as needed. I unclipped a wire on the driver side frame to give a little extra space to position the hitch.

It helps to have a helper to position the hitch and hold it up while bolting it.

This is my second hitch from Etrailer and like the first one it arrived in good condition.


This was a perfect fit for my 2018 Mazda 3 Hatchback. At first it looked like I could get it in by jacking up the rear. Alas, not the case. However, raising the rear DOES make it easier to work on. If you can sneak a little screwdriver into the rubber muffler mount, and spray in some silicone or other lube, it makes the job of removing the mounts much easier. You only need to remove the BOTTOM part of the mount, by the way. The welds and powder coat finish look great...pleased with the product and looking forward to many miles pulling a small trailer with light boats or a motorcycle. Follow through with etrailer was very professional after they could not find the used hitch that I first ordered. Helpful and friendly....

Pleased with the product...lots of use and still pleased with the design and function.
James - 08/10/2019


It's been a year since I've purchased and installed the trailer hitch for my 2018 Mazda 3 hatchback. Instillation was really easy, and zero body work paneling had to be removed or modified. I really like that because if I were to ever remove the hitch in the future, I can revert back to pristine condition. The quality has been top notch too. Throughout the seasons, the paint has held up and looks good as new. I really would recommend etrailer to anyone looking for mods.

2018 Mazda 3

The fit on my 2018 Mazda 3 hatchback was a touch off. I got one side loosely fastened and the other side, bolt holes were 1/8 or so off. I had to pry it a bit into place. Other than that it’s working fine.

2015 Mazda 3

The C11377 did not align properly with the frame holes on my 2015 Mazda3 iSport 4dr sedan and had to use the back feeder hole. Also had to trim some of the bottom spolier but not visible from the back. Also was one who pushed a screw back into the frame. Wish they would account for that and include 5 screws.

2014 Mazda 3

Couldn’t be happier, ship quickly and installed without a hitch.! No pun intended.

Pontiac Trans Sport Van

I am so happy with my experience with I ordered the Curt trailer hitch and a Swagman bike rack for my Mazda 3. Michelle S. was so helpful when the bike rack wasn't immediately available. She made a recommendation for a comparable bookrack- the Hollywood model. I am thrilled with my purchase. The items arrived when promised. The instructions for installing the trailer hitch and assembling the bike rack were very clear. The bike rack is easy to use and very secure. I love that the hooks around the bike frame lock with the key, and that the whole rack locks securely to the car. The bikes hardly moved during our drive out of state and did not touch at all. My family and I had a wonderful vacation this past weekend and were so glad to have great gear to transport our bikes.

2016 Mazda 3

Installation was easy on my 2016 Mazda 3/5 door hatchback. Using just a quick squirt of silicone lube on the 4 muffler hanger made them slip off with ease.
The 2 front mounting holes were not obvious and I first though that the hitch wouldn't fit, but looking a little closer the front holes were there under the muffler hanger rod and a little hard to see. They were also covered by tape that was mentioned in the instructions.
I found it helpful to temporarily support the hitch with plastic tie wraps from the muffler hangers with the hitch lifted in place until I could get the nuts on.
U-Haul wanted $250 for there hitch installed.


The hitch it's easy to install, very well built, and if you follow up instructions it won't take longer than 45min to 1hr.
Really recommend this style hitch for Mazda 3

Hitch is a heavy duty build, perfect for bike, platform or small teargear trailer. Very happy with my hitch.
Marcin W - 04/15/2021

2014 Mazda 3

Not too difficult to install, instructions were clear and had helpful pictures. No Drilling or cutting, just dropped the exhaust (only held on by rubber grommets) and it bolted right in. I only used it for a tow hitch mounted bike rack and it was more can enough to hold 4 bikes. It seems like it would be very capable of hauling small trailers from uhaul or the trailers that hold canoe's or kayaks. Your major limitation is going to be the 1.25" opening, and your Mazda's engine power. The tow hitch is rock solid and I would recommend this to anyone looking to make their 2104+ Mazda3 more utilitarian.

I sold the car I installed in on - but last time I saw it, it was still working great!
Evan - 01/30/2018


This is the 2nd one I have purchased, both perfect. I used this one to tow a jet ski and a 5x8 filled loaded uhaul (separately of course)

2015 Mazda 3

I put one on my Mazda 3 hatchback and it was as simple as could be. No drilling or anything like that. Fish the bolts thru the frame and tighten it down, then plug in the wires and hide them by the spare tire. The nice thing about this setup is that the plug is always inside and out of the elements when not in use. Even someone with very limited mechanical skills should be able to install a hitch like the one I have. Videos helped too.

Still working great!
Jon C - 03/12/2018

2018 Mazda 3

This thing is solid, clean and a lot easier to install than it looks.


Great product, probably the 3rd hitch I have bought from entailed. Everything it's been shipped fast with no issues. Took about 30-40 min to install. Great product and company.


So happy I bought this hitch. The service was great, etrailer directed me to the right hitch for my car. My mechanic who put my hitch on really likes their products.

I love my hitch it removes the hassel of taking our families bike to the bike path so we find ourselves riding more...more bike riding more fun..thanks
Tiana - 01/30/2018

Pontiac Trans Sport Van

Good product, fantastic price! My only gripe, and it's a small one. I wish etrailer would have wrapped the hitch to prevent damage during transport. There are several spots where the powder coating is chipped off and living in the northeast this will just expedite the rust from setting in.

After owning the hitch for a year, I couldnt be happier with the hitch. Having a hitch mounted bike rack is a much better solution than a roof rack. Amazing hitch for the money!
Mike - 03/21/2017


Works as advertised. Has held up well. Exact fit for my car. Great price and value.


We now have 3 Curt manufacturing trailer hitches in our family on various years of Mazda3. They all fit perfectly and were easy to install for this middle-aged woman. I also bought harnesses from etrailer. They have excellent service and an excellent website from which to order. I have installed both the wire-in harness and the plug in; I would recommend the plug in one for occasional towing. I was able to install the wire-in harness after some YouTube learning about using a multimeter. I also learned how to temporarily lower the muffler to install the hitch. A different brand of hitch is available that can be installed around the muffler instead of having to lower it, but I wanted a Curt Manufacturing hitch, so after some more You Tube learning I installed it without problems. I would definitely order from e trailer again!

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Can you Tow a Trailer with a 2018 Mazda 3
    According to the owner's manual for your 2018 Mazda 3, "Your Mazda is not designed for towing. Never tow a trailer with your Mazda." However, if you choose to ignore this recommendation then you will want to use the Curt Trailer Hitch Receiver part # C11377 which is a custom fit that installs using pre drilled holes in the frame rail. I have attached an install video for you as well.
    view full answer...
  • Ground Clearance of the Curt Trailer Hitch Receiver on a 2017 Mazda 3
    When we installed the Curt Trailer Hitch Receiver part # C11377 on a similar 2017 Mazda 3 we found that the distance from the ground to the top of the inside edge on the receiver tube is 11-1/2". Since the trailer hitch has a 1-1/4" receiver tube I can estimate that the lowest point on the trailer hitch is going to be around 10" off the ground. Please keep in mind that this distance can very well vary vehicle to vehicle as the tire size and amount of cargo will all play a factor but this...
    view full answer...
  • Will Curt Trailer Hitch # C11377 Work with Class II Bike Rack on 2016 Mazda 3
    The Curt Trailer Hitch Receiver # C11377 for your 2016 Mazda 3 does not have any kind of stop inside its opening that would prevent a Class II Bike Rack from sliding in. Some trailer hitch manufacturers do make their Class I hitches with this stop in place in order to prevent overloading the hitch, however Curt is not one of them. As long as the bike rack you are looking to attach is able to fit 1-1/4 inch trailer hitch openings, you will not have a problem.
    view full answer...
  • Frame Access Hole is Smaller on 2019 Mazda 3 Hatchback for Installing Curt Hitch C11377
    The cutout on your frame is different from what we have seen. It does appear to be smaller. You'd want to use a dremel or rotary tool to enlarge it slightly till you can pass the bolt and spacer of the Curt Hitch part # C11377 through.
    view full answer...
    Image 1 for
  • MaxxHaul MT70387 Wobbles Around in Hitch
    The threaded hitch pin shown being used in the photo is the correct pin. The other pin wouldn't work because of the internal threads in the shank of the bike rack. The threaded bolt shown in your photo is an anti-rattle hitch bolt. It's mean to be ran down all the way until it's snug. This pulls the shank of the bike rack tight against the side of the receiver tube which keeps the movement of the rack in the hitch to a minimum. Keep in mind that due to the fact that the rack is capable...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for Bike Rack On 2017 Mazda 3
    If you have a hitch on the 2017 Mazda 3 like the Curt Trailer Hitch Receiver part # C11377 then you can use any bike rack rated for use with class I hitches. This is the best option and what I recommend for ease of use. The best bike rack really comes down to the specs of the bike/bikes. I have attached our options below.
    view full answer...
  • Ground Clearance Of The Curt Trailer Hitch Receiver On A 2018 Mazda 3 Sedan
    The 2014-2018 Mazda 3 are the same generation car. The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4", part # C11377, is 11 1/2" from the ground to the top of the inside of the hitch receiver on both the 2015 and the 2017 Mazda 3. The 2018 should not be any different. So if we subtract an 1 1/4", which is the size of the hitch receiver, from the 11 1/2" measurement, you are left with between 10" and 10 1/4" inches of clearance from the ground to the bottom of the hitch receiver....
    view full answer...
  • Trailer Hitch that Fits 2016 Mazda 3 Hatchback Grand Touring S
    We have the Curt hitch part # C11377 which is listed as a fit for your 2016 Mazda 3 Hatchback Grand Touring and we also had a customer come back with your exact vehicle who told us it fit and worked well.
    view full answer...
  • Trailer Hitch Fit for 2014 Mazda 3 Hatchback that Does Not Require Trimming or Drilling
    The Draw Tite hitch part # 24914 that you referenced is a confirmed fit for your 2014 Mazda 3 hatchback. It does not require any drilling or fascia/bumper modification either. The Curt hitch part # C11377 does require some fascia trimming though.
    view full answer...
  • Hitch Receiver Options for a 2017 Mazda 3 Hatchback
    There are a pair of hitches which are a confirmed fit for your 2017 Mazda 3 hatchback, but unfortunately none of them are 2" hitches. The hitches which fit your vehicle are the Draw-Tite # 24914 and Curt # C11377, each of which are Class I, 1-1/4" hitches. Of the two, I recommend going with the Draw-Tite # 24914 because it will not require the use of stabilization straps when using accessories such as a bike rack.
    view full answer...
    Image 1 for
  • Trailer Hitch Fit Recommendation for 2017 Mazda 3 Hatchback
    I have a trailer hitch that has been confirmed as a fit for your 2017 Mazda 3, but as of right now (December 2016), the Curt is not a fit. Instead you would wan the Draw Tite hitch part # 24914 which has been confirmed as a fit and would work well.
    view full answer...
  • Why Does Curt Say a Stabilizer Strap Is Needed for Some Hitches Carrying Bike Racks
    Curt specifies that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt. For a stabilizer strap you could use the Curt Strap part # 18050. I attached a video that shows how it installs. Basically it attaches to the trunk lid of your vehicle and to the rack and provides additional support so that the weight of the rack over bumps does not jar the hitch...
    view full answer...
  • Hitch Recommendation for a 2015 Mazda 3 Hatchback
    For your 2015 Mazda 3 hatchback either the Curt Hitch part # C11377 that you referenced or the Draw Tite hitch part # 24914 would work well for you. I personally like the round tube hitches because I believe they are less visible than the square tube hitches, so I would go with the Curt hitch. You are right, the LED taillight consideration is actually for the trailer wiring and not the hitch. But since we connect the hitch and the trailer wiring fitguides so that on the product page of...
    view full answer...
  • Trailer Hitch for 2017 Mazda 3 Hatchback with 2,000 lb Trailer Weight Capacity
    I have a similar hitch that fits your 2017 Mazda 3 hatch back but the Draw Tite you mentioned does not fit your vehicle. Instead you'd want the Curt Class I part # C11377 which is rated for 2000 lb towing. For trailer wiring then you'd want the # 118405 and you'd be set.
    view full answer...
  • How to Pick Out the Correct Rise/Drop Euro Ball Mount
    In order to pick out the correct rise/drop ball mount to use with the Curt Hitch part # C11377 you will need to take a couple measurements. The goal is to have your trailer towed as level as possible. In order to do that the correct rise/drop ball mount needs to be used. To pick out the correct one you will need to measure the distance from the top of your hitch opening to the ground and then with your trailer sitting as level as possible measure from the bottom of the coupler to the ground....
    view full answer...
  • Are Trailer Hitches For 2014 Mazda 3 Different For LED Lights Versus Non-LED Lights
    The trailer hitches we offer are the same for the 2014 Mazda 3 Hatchback with or without LED lights. The trailer hitch I recommend for your Mazda 3 is the Draw-Tite Sport Frame, part # 24914. This is a Class l trailer hitch and it has a 1-1/4 inch receiver opening. I recommend the Draw-Tite hitch because the Curt hitch, part # C11377 requires the use of stabilizing straps like part # 18050 for all non-trailer items used in the hitch and many times that can be a hassle finding a location...
    view full answer...
  • Recommended Trailer Hitch for 2015 Mazda 3 Sedan
    As you mentioned, both the Curt Class I # C11377 and the Draw-Tite Class I # 24912 Trailer Hitches are confirmed to fit your 2015 Mazda 3 Sedan Grand Touring. Both hitches will work with all models of the Mazda 3 Sedan, however the Draw-Tite # 24912, as you referenced, is going to be a considerably easier installation process and will take about half the time as the Curt Trailer Hitch. Also keep in mind that per Curt warranty guidelines, all non-trailer loads such as bike racks and cargo...
    view full answer...
  • Will Trailer Hitch Receiver On 2015 Mazda 3 iSport Sedan Bottom Out When Going Into Parking Garage?
    It is unlikely that a trailer hitch receiver on your 2015 Mazda 3 iSport Sedan will hit the ground when going up or down a ramp to a parking garage. The Curt Trailer Hitch Receiver # C11377 which is confirmed to fit your vehicle, measures 11-1/2" from the ground to the top inside edge of the receiver tube, or about 10" from the ground to the bottom of the receiver tube. You would need to be going up/down a very step incline to run into any issues. The # C11377 is a Class I trailer hitch...
    view full answer...
  • Trailer Hitch Fit Recommendation for 2018 Mazda 3 Hatchback
    That's correct that the Draw-Tite # 24912 only fits the sedan model of the 2018 Mazda 3. Instead we carry Draw-Tite # 24914 and Curt # C11377. Of the two I like the Draw-Tite because it doesn't requrie the support strap, part # 18050, when you're using the hitch to barry a bike rack or cargo carrier.
    view full answer...
  • Trailer Hitch and Platform Bike Rack Recommendation for 2014 Mazda 3 Sedan With LED Lights
    The Curt Class I trailer hitch you referenced, part # C11377, will indeed fit your 2014 Mazda 3 Sedan with LED lighting. I confirmed this with my contact at Curt. So too will the Draw-Tite # 24912. The Curt hitch does require use of their stabzilizing strap # 18050 with any bike rack in order to retain your hitch's warranty coverage. Two helpful articles on hitch installation are linked for you along with the written instructions. The hitches offered for your Mazda 3 are all light-duty...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for a 2015 Mazda 3 Grand Touring
    Since you do not want anything touching the paint of your vehicle the best option is going to be a hitch mounted option. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. This rack can fold up for storage so that it will store easily as well. For a trailer hitch the part # 24914 would...
    view full answer...
    Image 1 for
  • No Drill Trailer Hitch Recommendation for a 2015 Mazda 3 Hatchback
    For your 2015 Mazda 3 the Curt hitch part # C11377 would be an excellent option. This hitch does not require any drilling or fascia trimming (when installed on a hatchback), and isn't too terribly heavy as it weighs 29 lbs. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. Curt requires...
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Mazda 3 Hatchback
    The final authority for whether or not a vehicle can tow a trailer will be the owners manual for the vehicle. There are other uses for trailer hitches on vehicles that aren't rated to tow like your Mazda 3 Hatchback. Such as carrying bike racks or cargo carriers. The Curt hitch part # C11377 has been confirmed as a fit for your 2015 Mazda 3 hatchback. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached...
    view full answer...
  • Will Curt Trailer Hitch C11377 Work For Carrying Bike Rack On 2018 Mazda 3 Hatchback?
    Yes the Curt Trailer Hitch Receiver # C11377 you were looking at for your 2018 Mazda 3 will work just fine carrying a bike rack, as long as the weight of the rack and your bikes combined do not exceed the 200lb tongue weight rating of the hitch. Since this hitch is a Class I hitch you will need to make sure that your bike rack is rated for a Class I hitch, as not all 1-1/4" receiver bike racks are. Class I hitches all have a tab in them that makes it so certain accessories will not fit...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830