Replacement Sidewind Crank Kit for Bulldog 10K Square Jacks
(13 reviews)
Price: $57.93
In Stock
Replacement Sidewind Crank Kit for Bulldog 10K Square Jacks
Item # BD800144
Retail:$81.58
Our Price: $57.93
You Save: 29%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (13)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Bulldog Accessories and Parts - BD800144
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Bulldog
Replaces the hand crank assembly for your Bulldog sidewind jack with a 10,000-lb capacity (180487, BD180304, BD180354, 180405, or BD180455). Includes the handle and gear kit that includes both 26- and 14-tooth gears.
Features:
- Replaces the hand crank assembly for your Bulldog sidewind jack with a 10,000-lb capacity (180487, BD180304, BD180354, 180405, or BD180455)
- Crank radius: 10-1/2"
- Includes handle, and gear kit that includes both 26- and 14-tooth gears
Fits:
- Bulldog sidewind jack with a 10,000-lb capacity: 180487, BD180304, BD180354, 180405, and BD180455
800144 Replacement Sidewind Crank Kit for Bulldog 10K Square Jacks
California residents: click here
Video of Replacement Sidewind Crank Kit for Bulldog 10K Square Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Bulldog Trailer Jack -Sidewind Assembly Crank Kit - BD800144
Jeff Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Bulldog Sidewind assembly crank kit for the Bulldog 10,000 pound square jacks. Now this crank assembly is for the Bulldog Sidewind jacks that have the 10,000 pound weight capacity. The crank it does come with, and the crank radius, which is measured from here to here, on this one is gonna be right at 10 1/2 inches. And this kit will include everything shown here on the table, and we mentioned the handle's included. If we zoom in show you the smaller parts, comes with two gears, a 26-tooth gear and a 14-tooth gear, comes with the bearing, comes with the two hex nut washers that have the large hole, comes with the offset washer, two round washers, one thick one thin, and then two roll pins, one short and one long.
But with all these parts, you will be able to rebuild your Bulldog 10,000 pounds square jack. But that should do it for the review on the Bulldog Sidewind assembly crank kit for the Bulldog 10,000 pounds square jacks..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Did not fit
Customer Reviews
Replacement Sidewind Crank Kit for Bulldog 10K Square Jacks - BD800144
Average Customer Rating: 4.9 out of 5 stars (13 Customer Reviews)
Replaces the hand crank assembly for your Bulldog sidewind jack with a 10,000-lb capacity (180487, BD180304, BD180354, 180405, or BD180455). Includes the handle and gear kit that includes both 26- and 14-tooth gears.by: Ray10/12/2022
Received the items as advertised and fit perfectly to replace the damaged parts on the landing leg. The description and pics on the site were helpful in determining the correct parts were ordered. The team provided updates frequently due to items being backordered, will definitely use etrailer for future needs.
by: Joey 07/23/2022
One of our guys jackknifed our chipper and broke the handle off. The jack worked great before and the repair is super simple. Extremely pleased with the overall product.
by: Kathy 09/13/2018
We have found that etrailer is a great place to go for our needs! Glad our friend told us about etrailer! it is easy, affordable and receive quickly! No complaints from us!
Thank you etrailer.com! !!
by: Raymon12/03/2018
We are a parts department for a public utility company. They break these frequently. eTrailer had the best delivery-time available and responded to my email to verify availability.
by: ben g10/18/2014
shipped and arrived promptly and was a exact match to the broken part
by: Louis02/21/2018
Very Nice to deal with. great follow up and product is exactly what i was expecting.
Thank You
by: Plainview04/10/2020
FAST SERVICE, VERY COURTEOUS & PROFESSIONAL. AND QUICK DELIVERY. HIGHLY RECOMMENDED.
by: Shannon02/01/2022
FAST!
by: Scott Hartley02/05/2022
by: Fred 04/21/2021
by: Matthew 08/15/2022
by: Jim 10/11/2021
12
12
See what our Experts say about this Bulldog Accessories and Parts
- Replacement Beveled Gears For 10,000-lb Bulldog Square Sidewind JackThe replacement gears are not available as a separate item but we do have the gears included with a crank kit for the Bulldog 10K square jack. You can order part # BD800144. This kit has the two beveled gears along with the pins, washers and handle.,
view full answer... - Bulldog Sidewind Assembly Crank Kit Gear DimensionsThe Bulldog Sidewind Assembly Crank Kit for Bulldog 10K Square Jacks Item # BD800144 has two gears in the kit. The measurements are as follows: The 14 tooth gear: Inner diameter (bore size) is 5/8" Overall diameter is 1-5/8" Height overall is 1-3/8" the height of the gear portion itself is 1/2" The 26 tooth gear: Inner diameter (bore size) is 0.612" Overall diameter is 2-5/8" Overall height is 3/4"
view full answer... - What is the Measurement of the Bulldog Crank Kit # BD800144 from the Handle End to Pin Hole?The end of the handle to the roll pin hole of the Bulldog Sidewind Assembly Crank Kit for Bulldog 10K Square Jacks # BD800144 is 11 inches long. I went ahead and attached a diagram of the dimensions to give you a better perspective.
view full answer...
- Replacement Handle For Bulldog Square 10,000LB Side wind Jack 180461You will need the Replacement Sidewind Handle # BD800144 for your Bulldog Jack 180461. This handle is a fit for Bulldog square side wind jacks with a 10,000-lb capacity.
view full answer... - Replacement Handle Recommendation for Bulldog Sidewind Trailer Jack # BD180455If you have the Bulldog sidewind trailer jack # BD180455, then you can replace the sidewind assembly with part # BD800144. It will include the handle, gear and bushing kit.
view full answer... - Replacement Handle for a 7,200 Pound Bulldog Square JackIf you have the Bulldog sidewind trailer jack # BD180455, then you can replace the sidewind assembly with part # BD800144. It will include the handle, gear and bushing kit. For the Bulldog square top wind jack # BD180354 or # BD180304, the replacement topwind handle is # BD500344. It will include the crank, bolt and nut. I included a couple video reviews for you as well.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Expert Research:
Jeffrey L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.