bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-1/2 Inch
  4. For 2000 lbs Axles
  5. Hub
  6. Easy Grease
  7. EZ Lube
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized

Item # AKIHUB-545-2-G-EZ-2K
lowest price pledge
Our Price: $54.77
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
In Stock
AKIHUB-545-2-G-EZ-2K - Easy Grease,EZ Lube etrailer Trailer Hubs and Drums
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized part number AKIHUB-545-2-G-EZ-2K can be ordered online at or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (62)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-2-G-EZ-2K

  • 5 on 4-1/2 Inch
  • For 2000 lbs Axles
  • Hub
  • Easy Grease
  • EZ Lube
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 1/2 Inch Stud
  • L44649
  • L44649
  • etrailer

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.


  • Marine-grade trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Galvanized finish offers excellent corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
  • QAI and CSA certified


  • Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 10" to 12"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,000 lbs
  • Limited 1-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

H-150-97 AxleTek Trailer Idler Hub Assembly for 2K Axle with Hardware - 5 on 4-1/2 - Galvanized - EZ Lube

Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized - AKIHUB-545-2-G-EZ-2K

Average Customer Rating:  4.7 out of 5 stars   (62 Customer Reviews)

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.


I have an issue with my hub assembly kit; before I ordered product I called customer support and went thru order process with your product expert ; during installation process an issue with the grease seal the outside diameter is correct for the new hub but the inside diameter is 1.50 and my trailer spindle is 1.25 so I called customer support and was told I would just have to purchase new ones, I feel there is a flaw in your order process not to have this included in the information needed

The seal that is listed on the product page is a 10-9 seal that has an inner diameter of 1.50 inches. We do carry the seal part # 34823
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
that has the 1.249 inches inner diameter and outer diameter of 1.983 inches.
-- Etrailer Expert Jenny N - 03/11/2022


Purchased for my triton lite 2200lb axle. They fit well and kit is nice. My only complaint is the caps provided are super thin and hard to get in right without damaging them.


I ordered hubs on labor day they were at my house that Thursday. Speedy shipment were on trailer Friday. Everything fit and was back to functioning.


The complete kit cost less than if only the bearings were bought locally. The kit included EVERYTHING a real time/effort saver. Price was very good and shipping was unbelievably fast. Communication about the order was perfect. The races being already installed was a nice touch. Very, Very happy customer! This was my third order and all have been really first class.


Gwen was super helpful in me getting the correct parts to replace the axle and hubs on my H.F. fold up trailer. NOTE: If you aren't sure the hubs are for your axle, contact etrailer customer service to make sure. I ordered the wrong hub for my axle and had to pay to ship them back, then wait a week for the correct hubs to be delivered. Also the axle nut, washer and cotter pin was missing, but Gwen got them shipped to me and they arrived in time for my trip.


I bought this as a spare for my trailer. I kept it in my car along with a tub of marine grease. Just for emergencies. I was visiting my son in NY fishing on Long Island Sound. The hub on his trailer was wobbling when we pulled the boat out. I had a spare and it saved the day. Great parts at a great price!


Perfect fit! Asked for replacement hubs for a Dexter D20 axle and these are what were suggested.


Amazing as always!!!


I think you did a great job getting me the right parts. It means a lot tome when you get the parts for the job. I will in the future buy your parts again. Thank you.


The right hub for my Karavan small boat trailer with EZ lube hubs. Over 7,000 miles and not single issue.


The product arrived as expected. The time to process, and ship the product was longer than expected. Order placed 4/16, arrived 4/26.


Very prompt service, order received in 2 days. Company representative (Hallie) Capable and knowledgeable of company products.


The hub is still going strong after a year of regular use. I keep it greased and it does the rest. The price was right, too. This hub with bearings and seals was about the same price as the bearings alone at the local auto parts dealer. I do have two small negatives, neither of which take a star off my review. One, the dust cap fits very tightly and is hard to get on the first time. I had to grind the edges just a bit for it to go on. Second, the grease seal with the kit didn't fit my axle, although the bearings did. Check on this if your axle is a bit different. I don't remember the dimensions, but it was the ID of the seal that was too big.


Worked great


I had no problem putting these new hubs on my Shortland'r PWC trailer. The inner grease seals that come with the package had to be swapped out for a different size, but that was a small added cost. The studs are plenty long for the wheels I have and with a shallow depth lug wrench, you might lose a little of the overlap on the lug nut.


Etrailer had the parts on hand. (Important in this time of shortages) The parts were shipped expeditiously and should work well.


I’m really impressed with the high level of service that I’ve received from etrailer! Great customer service regarding ordering correct replacement hubs/bearings! Fast free shipping and overall positive experiences ( 2- orders)!


I had to replace all the hubs after two years of minimal usage. The manufacturer had assembled the axles without washers and spun all bearings and races! They didn't even use galvanized hubs. Quick delivery and exact fit! Thank you etrailer!!!


This is a great company. I have placed several orders over many years. This company knows the product they sell. Customer service and order accuracy is unmatched. Highly recommend.


Everything arrived in good order and condition. What has really impressed me with etrailer is the customer service. I received emails from real people answering my questions and keeping me up to date with my order status. I even got a phone call from the shipping person making sure they facilitated my order in the best way possible for me. Count me as being really impressed!!!! I will be ordering all of my trailering supplies from your company in the future. I wish more companies ran this way. Great experience!


etrailer is the best. Hub and bearings worked great. A part was damaged in shipping and etrailer shipped a replacement right out. What are you waiting for? Get online or call etrailer TODAY!


Only been about 400 mi but working well


Part was & is spot on. Great service I also ordered a wheel tire w/ my order it was an odd size , tried to guess it I was wrong. The day after delivery I called them spoke with Katie , she found the correct size and arranged return shipping of wrong wheel. Absolutely 1st class American speaking Customer service.!!!!


Perfect fit for my 8x8 snowmobile trailer. I like eTrailer as it is easy to find the specific parts you need and they also have helpful installation videos too.


easy install, no issues after a year in use

Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Replacement Hubs with L44649 Bearings on Snowmobile Trailer
    Based on the information and pictures you provided (thank you!) either the 2K Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K or the Galvanized # AKIHUB-545-2-G-EZ-2K you referenced would work great as replacements, the only physical difference between the two being their finish. Since you primarily use the trailer in the winter and on salty roads, I do think the Galvanized # AKIHUB-545-2-G-EZ-2K is your best option, as it's just going to do a better job of resisting corrosion...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Correct Idler Hubs for 2013 Triton LT Single Jet Ski Trailer
    The 2013 Triton LT Single Jet Ski Trailer could use either L44643 (1") or L44649 (1.063") bearings so you'll need to pull the hubs apart to see which you need. If it's L44643 then go with the Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-2-G-EZ-1K or if it's L44649 then go with the Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-2-G-EZ-2K.
    view full answer...
  • Replacement Trailer Idler Hub Assembly For Float On Trailer
    It seems to be the right hub assembly, but you'll want to check your bearing numbers on your existing set up to make sure. If the inner bearing is # L44649 (1.063" inner diameter) and the outer bearing is # L44649 (1.063" inner diameter) then # AKIHUB-545-2-G-EZ-2K is the correct kit!
    view full answer...
  • How to Find Replacement Hubs for a Small Boat Trailer
    The replacement hub assembly will depend on the size and weight rating of the axle. We have many options for hubs for 2,000 lb axles if it is that light of a trailer. This is the smallest axle size we offer replacement hubs for. I have provided the link to our website for 2,000 lb axles and a link for our other replacement hubs below. If you provide the bearing numbers, I can match them to a hub assembly that will fit your trailer.
    view full answer...
  • Correct Replacement Hub for 2005 Karavan KKR-1800-70
    The correct replacement hub for your 2005 Karavan KKR-1800-70 is the Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-2-G-EZ-2K. This hub has a galvanized finish which is best for saltwater and it comes with bearings, races, seal, and grease cap.
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Boat Trailer Hub Recommendation with L44649 Bearings and 5 on 4-1/2" Bolt Pattern
    We have exactly what you need with the Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-G-EZ-2K. This has the 5 on 4-1/2" bolt pattern, uses L44649 inner and outer bearings, and a grease seal with a 1.50" inner diameter. This hub also has the galvanized finish which helps fight rust and corrosion from water better than the standard powder coat finish does. Attached is an installation video for you to check out. If you are also needing tires and wheels just let me know...
    view full answer...
  • Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
    I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized part # AKIHUB-545-2-G-EZ-2K For 4 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - Galvanized part # AKIHUB-440-2-G-EZ-2K These are designed for the straight...
    view full answer...
  • Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
    I recommend our etrailer hubs for your trailer. I've linked the complete selection that fits with your # L44649 bearings. Which ones are exactly the right ones depend on your trailer's wheel size and if it has brakes or EZ lube spindles: Idler hubs 12 inch or smaller wheels: Standard spindles - # AKIHUB-545-2-2K EZ lube - # AKIHUB-545-2-EZ-2K Idler hubs 13 to 15 inch wheels: Standard spindles - # AKIHUB-545-2-LF-2K EZ lube - # AKIHUB-545-2-LFEZ-2K Hub and drums for brakes: Standard spindles...
    view full answer...
  • How to Determine Replacement Hubs for Home Built Trailer
    Unfortunately yes, you'll have to pull the hubs to get the bearing numbers. The hub assemblies you referenced, part # AKIHUB-545-2-G-EZ-2K, include a grease cap with a rubber plug that is removable. This allows you to access the zerk fitting on your trailer's spindle, if you have one. If you have a zerk fitting on the spindles then you have E-Z lube axles. I've attached pictures of both spindles for you to see the difference. If you don't have E-Z Lube axles instead the same hub assembly...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
    Luckily, FLOE International is still around. I was able to find that your 10 foot tilt single axle snowmobile trailer used an L44649 inner and outer wheel bearing. Your snowmobile trailer was equipped from the factory with idler hubs that had a 5 on 4-1/2 inch bolt pattern. Due to its being exposed to harsh winter conditions and possibly road salt, going with a galvanized hub would be recommended versus a painted hub like the # 34822545BX you'd looked at. I'd go with part # AKIHUB-545-2-G-EZ-2K,...
    view full answer...
  • Replacement 5 On 4-1/2 Bolt Pattern Boat Trailer Hub for 1 Inch Spindle
    Before proceeding, I'd take a moment to confirm the spindle diameter, because there are two different bearing sets that are very close in dimension, so you'll want to be absolutely sure of the measurement you get. We recommend using a digital caliper like part # PTW80157. When dealing with specifying spindle/bearing ID dimensions a ruler or measuring tape typically won't provide enough accuracy which is why using a caliper is preferred. If your spindle measures 1 inch, your hub uses...
    view full answer...
  • Replacement Idler Hub Assembly for Lowe 16 Foot Boat Trailer
    Based on your inner and outer bearing being the L44649 bearing, the Trailer Hub Assembly # 8-258-50UC1-EZ will work well for you. You will want to confirm that your existing hubs have a 5 on 4-1/2 inch wheel bolt pattern. I was unable to find any information with the 6289103 number you provided. The galvanized hub assembly I recommend is the Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-2K. If you do not have an EZ lube axle, you can use # AKIHUB-545-2-G-2K. If your hubs have a 4 on...
    view full answer...
  • Replacement Option for Axle With Metric Spindles for Haul Master Trailer
    Unfortunately, we don't carry a replacement axle that's compatible with metric hubs, but we do offer options that would get your trailer back on the road. We do offer hubs compatible with the # CE33201GA axle. For a 5 on 4-1/2 inch bolt pattern, I'd recommend going with part # AKIHUB-545-2-LFEZ-2K or for a 4 on 4 bolt pattern, use # AKIHUB-440-2-EZ-2K. If you'd prefer galvanized hubs for greater corrosion resistance, use # AKIHUB-545-2-G-EZ-2K for a 5 on 4-1/2 inch bolt pattern or # AKIHUB-440-2-G-EZ-2K...
    view full answer...
  • Difference Between Hubs Designed For 8-10 Wheels and Hubs Designed For 13-15 Wheels
    The difference between a hub that fits a 8-10" wheel like part # 34822545BX and 13-15" wheels like part # AKIHUB-545-2-LFEZ-2K is normally the hub diameter but that is not always the case. Some hubs are designed for larger wheels because the diameter of the idler hub is larger. Some manufacturers label their hubs to only be used with certain wheel sizes. The AKIHUB-545-2-LFEZ-2K hub that fits 13-15" wheels is 6.25" compared to Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles part...
    view full answer...
  • Replacement Hubs for Boat Trailer with L44549 Inner and Outer Bearings
    I'm guessing you actually have bearings # L44649 and you either mistyped or the bearing number is difficult to read. Having # L44649 as both the inner and outer is a very popular combination on 2,000 pound axles. If you need to verify to be sure this is what you have measure the inner diameter of the bearings with a digital caliper, like part # PTW80157. It should meaure 1.063 inches. I've also done some research and found that bearing L44549 has the same dimensions as # L44649 so it...
    view full answer...
  • Galvanized 5 on 4-1/2" Trailer Idler Hub Assembly That Fits a 1-1/16" Straight Spindle
    Yes, the 1-1/16" diameter spindle is the same as the 1.063" BTR Spindle. We have the Easy Grease Trailer Idler Hub Assembly that is galvanized in a Standard # AKIHUB-545-2-G-2K or EZ Lube # AKIHUB-545-2-G-EZ-2K. You will simply need to select the correct kit based on if your spindle has the grease zerk to add grease. You can add the Bearing Buddy Bearing Protectors # BB1980A-SS to the standard hub so you will be able to add grease like you would an EZ lube axle.
    view full answer...
  • Replacement Parts Needed To Convert Wheel Style Trailer Hub With Idler Hub On Homemade Boat Trailer
    To be able to install a different hub you will need to replace your spindles. The BTR E-Z Lube Spindle # TRU44FR as a 1-1/4" shaft that is designed to be welded inside your current axle tube. If your axle tube has a different inner dimension let me know and I can help you find the right one. This new spindle will get you common size bearings allowing for you to change hub styles and a E-Z lube grease zerk to ensure that your bearings are filled. You will be able to mount a 4 on 4" Hub...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
    The 8 inch wheels that you have does make things a little more difficult, but we do have an option available. With that being said, I recommend going with the Timbren Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2 # TA88545-2. These are specifically designed to be used with 8" to 10" wheels and does have the 5 on 4.5 bolt pattern. These come with all the needed bearings, seals, caps, and lug nuts. They are also rated for use up to 2,500 pound trailer axles, so they...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for Image 5 for Image 6 for Image 7 for Image 8 for
  • How to Select Replacement EZ-Lube Hubs for Diamond Cities Boat Trailer
    We can help you select a new hub that will fit on the existing spindles on your Diamond Cities boat trailer model 1542. So long as you are sure your spindles are not damaged all you need to do is confirm a few details from your original hub. If 2K is your axle's weight rating and you need a 5-on-4-1/2 bolt pattern hub you can click on the linked page to see all E-Z Lube idler hubs and hub/drums rated for this weight and with that bolt pattern. It is best to check the sticker or plate on...
    view full answer...
    Image 1 for
  • Replacement Hub Kit For Continental Kayak Trailer
    In order to match up a hub and bearing kit for your Continental Kayak Trailer, we need to determine which hubs and bearings you currently have. You can measure the axle spindle at the spot where the bearings are normally at. Use a caliper such as 4" Carbon Fiber Digital Caliper # PTW80157. You can also remove the bearings and find a part number; this will tell us the size of the bearings and hub that you will need. Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-2K is an example of a similar...
    view full answer...
    Image 1 for
  • Replacement Hubs For Zeaman Jetski Trailer with L44649 Bearings and 5 Bolt Hub
    It looks like you've got a straight spindle that uses # L44649 bearings on your Zeaman jetski trailer and you mentioned you've got a 5 bolt hub. To replace your old hubs I recommend using the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-EZ-2K since it's a galvanized idler hub that will help fight off rust that a regular hub might not. I've linked a short review video of that for you to check out.
    view full answer...
  • Replacement Galvanized Hub for a 2000 Floe Pro 1 Plus Single Axle Snowmobile Trailer
    I did some research and your 2000 Floe Pro 1 Plus single axle snowmobile trailer uses a L44649 inner and outer bearing. Seeing as how these hubs are going on a snowmobile trailer and will be exposed to road salt and quite a bit of moisture I highly recommend going with the galvanized hub. You're going to want the Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized item # AKIHUB-545-2-G-EZ-2K. These include the Dexter E-Z Lube and etrailer Easy Grease-compatible...
    view full answer...
  • Recommended Hub For Reliable BT150A Axle
    The Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-1K you were looking at may fit your Reliable BT150A axle, but based on my research it may use the # L44643 bearings like the # AKIHUB-545-2-1K, or may use # L44649 bearings. The only way to be sure is to remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649. If your hubs use the # L44643 the # AKIHUB-545-2-1K would be correct. If your...
    view full answer...
    Image 1 for
  • Hub Compatible With CE Smith Trailer Axle Beam With EZ Lube Spindles
    The correct hub assembly for CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles # CE33201GA is Idler Hub Assembly for 2,000-lb E-Z Lube Axles # AKIHUB-545-2-G-EZ-2K. This hub assembly uses inner and outer bearing L44649 and has a 5 on 4-1/2" bolt pattern and comes with the necessry nuts for installation.
    view full answer...

< Previous

Do you have a question about this Trailer Hubs and Drum?

  • Why

    At we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.