bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 6 on 5-1/2 Inch
  4. For 5200 lbs Axles
  5. For 6000 lbs Axles
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
  9. 16-1/2 Inch Wheel
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased

Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased

Item # AKHD-655-6-EZ-K
Our Price: $150.11
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included. Great Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased part number AKHD-655-6-EZ-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (254)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKHD-655-6-EZ-K

  • 6 on 5-1/2 Inch
  • For 5200 lbs Axles
  • For 6000 lbs Axles
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • Hub with Integrated Drum
  • 1/2 Inch Stud
  • Easy Grease
  • EZ Lube
  • Pre-Greased
  • 15123
  • 25580
  • etrailer

Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


Specs:

  • Application: 5,200-lb and 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 12-15/16" diameter x 2-3/8" wide
    • Works with 12" brake assembly
  • Bolt pattern: 6 on 5-1/2"
  • Wheel studs: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 2.45"
  • Weight capacity: 3,000 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KBD2-655-19 AxleTek 12" Hub and Drum Assembly for 5,200-lb and 6,000-lb Axles with Hardware - 6 on 5-1/2 - EZ Lube - Pre Greased





Customer Satisfaction Score:


Customer Reviews

Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased - AKHD-655-6-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (254 Customer Reviews)

Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.

by:

Arrived fast and install went flawless.
After
one year later I rechecked the torque on lug nuts and the free play on center nut. All good…..my advice is get a spare to keep in trailer for an emergency repair, like what happened to me when all the wheel studs broke off and I lost the entire wheel!



by:

Our Flat bed trailer can do some pretty heavy work however we do not use this trailer all the time.
When the brakes failed we ordered from etrailer and the parts came in and we installed them without much ado.
Thank you for having all the parts we needed. After a year of seldom but heavy usage the self adjusting brakes are still working splendidly.



by:

I purchased 6 of these hubs for replacement of what I call "mobile home" hubs so that I could convert to standard rims and tires. They worked perfectly. I have several thousand miles on them now with absolutely no issues. Excellent product!



by:

The order showed up in a quick timing. Everything was in great shape and installation was a breeze.



by:

these arrived ups in poorly wrapped boxes with one hub openly displayed but after close inspection it appears no damage and they fit onto the hub without issue. like they're pre-packed with grease, bearings so they are ready to install. they slid on easily and matched up with new brakes ordered earlier. all around great package for brakes overhaul. highly recommend



by:

Item is damaged, 1 lug nut missing, 1 stud cross thread, dust cap damaged.

Etrailer Expert

Sierra K.

5/11/2022

Customer Service will reach out to you.



by:

Hub and drum assembly fell apart in the center within one year! Bearings look fine!



by:

Exact replacement. One year later and still working great. About 2000 miles.



by:

Worked great! Very easy.



by:

Really heavy duty. The pre-grease takes all the hassle out of the replacement job.



by:

This was way easier than expected, the hardest part was the mess inside, but installing the kit per the online video instructions was a snap and I encourage anyone to do theirs. Here's a couple after pictures.

Darrin A.

7/17/2019

Working great!



by:

Great price and worked with no issue on 3,000 mile trip. It was great to install them already greased and ready to go.



by:

Perfect fit, and easy to install, especially with the video from the site!



by:

The hubs bearings and seals are outstanding products and pretty simple to install. I had a small issue with the dust caps as they were to tight to just tap into the hub. I like the fact that the wheel studs in these hubs are a little longer than factory parts!
Great Product.



by:

Shipped very quickly and customer support was the best! Thanks Jill!



by:

I was in desperate need for new hub/drum assemblies for my flatbed trailer. Once again etrailer came through for me. I particularly like the fact these arrive assembled with seals and pre-packed bearings.

J T.

3/26/2023

These hub and drum assemblies worked great right out of the box. They were easy to install. I have since sold the trailer but the brakes made a big difference in use of the trailer and in the resale value.



by:

Perfect fit.



by:

Parts were an exact match. I replaced the brake assemblies, drums and bearings on my toy hauler. Was not sure these would work with Lippert 5200 lb. axles but, etrailer assured me I was buying the parts I needed.



by:

Just got back from trip to Bowling Green. Pulled camper with 3/4t Ram. Adjusted electric brake and all worked perfect. Now, I did have 3 tire separations. They were 3318 date code load E on a 6500# camper. 3 of four separated, today replaced. Now FYI, 3 YEARS REPLACE TIRES!!! I try to replace between 3 to 5 years but haven't used the camper but 4 times and about 2k miles.



by:

Perfect fit, easy installation



by:

I like ordering from here because of good service and quick delivery. I’ve only got about two thousand miles on my trailer since I changed bearings and hubs but everything seems to working out very well so far,very satisfied.



by:

so nice not having to pack the berings



by:

Christina helped me make sure that I ordered the correct hub. Ordered on Monday arrived on Thursday. Hubs came assembled and greased as advertised. Not knowing what grease was in the hub, I was concerned that there might not be enough grease to finish the job, like coating the axle or that finishing touch on the outer bearing. No worries, there was plenty of grease, more than I would have normally used. I'm not a grease expert but it seemed to be good stuff, very sticky and not overly stiff. I noticed that the couple of places that I could see a bearing, that the bearing had been pressure packed with streams of grease between the rollers. The hubs came in heavy, individual, corrigated boxes, and in a heavy plastic bag, perhaps explaning why they were clean and not banged up when I got them. Each end of the hub had a plastic plug in it to keep it clean. You'll need your axle washer, nut and retainer. Good on ya' Etrailer.



by:

easy peasy



by:

This was a perfect fit replacement assembly, pre-greased and everything ready to go. It made the repair an easy process.


25
254
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Replacement EZ-Lube Trailer Hub Assemblies For A 2023 ATC Pla 700
    Hey Steve, To find the correct replacement hub assembly we'll need to determine what bearings fit the spindle of your trailer's axles. If you remove the hub you'll pull out the outer bearing and will see the grease seal on the back. To get to the inner bearing you'll have to pull out the grease seal, which will damage it and you won't be able to move the trailer until you get a new seal. Both the bearings and grease seal should have a part number stamped into them but it could potentially...
    view full answer...
    Image 1 for
  • Timbren Axle-Less Suspension Options With 2 Inch Lift Spindle
    I checked with the manufacturer, and there isn't an option for a 2 inch lift for the 2,200 lb Timbren systems. The only options that have a 2 inch lift are the 3,500 lb-rated and 5,200 lb-rated Timbren systems, and they each come with a brake flange welded on, though if you don't want to use brakes you don't have to use that flange. So if you want to go to a higher-rated system with the 2 inch lift you can use either of the following: - 3,500 lbs: Timbren Axle-Less Trailer Suspension...
    view full answer...
  • Troubleshooting Replacement Hub/Drum Fit on 1962 Airstream
    In order for replacement hubs to fit on your existing spindles the new hubs need to use the same inner and outer bearing parts. The hub/drum assembly you selected # AKHD-655-6-EZ-K uses inner bearing # 25580 and outer bearing # 15123 and it is intended for a 5200-lb or 6000-lb axle with number 42 spindles. The bearing inner diameters are 1.75-inches for bearing # 25580 and 1.25-inches for bearing # 15123. The hub's included grease seal has an inner diameter of 2.25-inches. If these bearings...
    view full answer...
    Image 1 for
  • What is Difference Between etrailer Trailer Hubs # AKHD-655-6-K and # AKHD-655-6-EZ-K
    The only difference between the # AKHD-655-6-K and the # AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either hub part number.
    view full answer...
  • Does AKHD-655-6-EZ-K Pre-Lubed 3500 lb Hub Drum Need Additional Grease Before Installation
    The # AKHD-655-6-EZ-K hub would arrive with the grease seal, the races and the inner and outer bearings installed. The bearings are already packed with grease, so the hub is ready to install. I'd recommend using some additional all-purpose marine wheel bearing grease like # L11465, and smearing a good coating on the spindles as some extra added insurance. I've linked to a product description video featuring this hub/drum. All this being said, since this is for a boat trailer I'd instead...
    view full answer...
  • Are There Electric Trailer Brakes To Replace Warner Brakes On a 1960's Trailer?
    Unfortunately Bill, we are not going to have any parts that will let you keep your current axles. You can either look at getting replacement axles which I can help you find or you can look at installing the more common #42 Spindle # TRU37FR or # TRU39FR on your axle. These would need to be welded in by a shop with an axle jig to ensure they go on perfectly straight. If you can let me know what width axle you have from hub face to hub face and spring center to spring center I can determine...
    view full answer...
  • Replacement Hub and Drum Recommendation for Lippert 6k Trailer Axle
    Your picture didn't make it through, but the trailer hub and drum part # AKHD-655-6-EZ-K is a confirmed fit for a 6k Lippert trailer axle like what you have and has the correct 6 on 5-1/2 inch bolt pattern you need. It also comes with the needed bearings and seal as well.
    view full answer...
  • Replacement Hub/Drums and Brakes Needed for 42' Forest River Explore Sierra Destination
    From what I can find it looks like you should have tandem 5,200 lb axles on your 42' Forest River Explore Sierra Destination. This means that the correct replacement hub and drum assembly is part # AKHD-655-6-EZ-K and the replacement brake kit should be part # AKEBRK-7-SA. The hub and drums use inner bearing # 25580, outer bearing # 15123, and grease seal GS2250DL which has a 2.25" inner diameter. The brakes are 12" self-adjusting electric brakes. I have attached a sample installation...
    view full answer...
  • Axletek-12-GG Replacement Brake Assembly and Hub Recommendation
    The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part # AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self adjusting as well. Then if you have a 6 lug hub/drum currently the correct replacement would be the part # AKHD-655-6-EZ-K or if you have an 8 lug hub you'd need # AKHD-865-7-G-EZ-K.
    view full answer...
  • Brakes, Hubs, Tires and Wheels for 6,000 lb Axle
    I have a complete setup for your trailer that will work great with your 6,000 lb axles. I recommend using the Electric Trailer Brake Assembly, both left # AKEBRK-7L-SA and right # AKEBRK-7R-SA hand sides of your trailer. These brakes have the self-adjusting feature on them so you don't have to manually adjust your trailer brakes every 3,000 miles. Since you are building a trailer, you are going to need some wiring as well. I am not sure what kind of trailer you are building, but you...
    view full answer...
  • Recommended Suspension and Axle Upgrade For 2018 Grand Design 2800BH
    I have another option for you, but Trailer leaf springs are not designed for off-roading and can break when used in rough off-roading conditions. I do have a great option for you which is the Timbren Heavy Duty Axle-Less Suspension System # TASR35HDS04. This system has a 3500lb weight capacity which matches your current axles, but being the heavy duty version they are made of thicker metal making them a great option for off-roading. The Timbren # TASR35HDS04 will replace your current leaf...
    view full answer...
  • Recommendation For Hub Upgrade For Mobile Home Axle
    Mobile home axles, hubs, and parts are designed for more of a one time use. Most of the time, replacement parts and options are not available. However, since you found the bearing numbers (Inner Bearing Item # 25580 and Outer Bearing Item # 15245) then Trailer Hub and Drum Assembly, Item # AKHD-655-6-EZ-K, might work. Before going forward with this option, there a few things to consider regarding right fit of Item # AKHD-655-6-EZ-K. First, This assembly is specially designed for E-Z...
    view full answer...
  • Option For Replacing 6k Axle With Spring Center Length Not Available
    I sincerely apologize but we do not have axles with that measurement. The only option I can offer is to replace them with the Timbren Axle-Less Trailer Suspension # TASR7KS01. This removes having to find an exact length of axle, and you would also need Hub & Drum # AKHD-655-6-EZ-K.
    view full answer...
  • Brake And Hub/Drum Assemblies For The Timbren Axle-less Trailer Suspension # TASR35HDS06
    The Dexter Electric Trailer Brake Kit w/ Parking Brakes # 23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension # TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ and etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K use the same bearing and sizes but only the etrailer # AKHD-655-6-EZ-K has the correct size grease seal. For parking brakes we really don't have much of a selection besides the Dexter Breakaway...
    view full answer...
  • Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
    You shouldn't really have any play with the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. If you are getting play in it then the bearings most likely are either not set correctly or were the incorrect choice for your axle's spindle. I recommend removing the hub and measuring your spindle with a set of calipers at points B, C, and D from the diagram below. Once we have these measurements we can ensure that you have the correct bearing/hub combination. As for the installation...
    view full answer...
    Image 1 for
  • Brake Kit and Hub/Drum Assembly Needed for 1994 Four Winns Single Axle Boat Trailer
    Since the spec sheet said 4,740 lbs per axle and you have 6 on 5-1/2" lug patterns I think it's safe to assume that brakes and hub/drums rated for a 5,200 lb axle would fit, but I would still try to double check on your end just to be sure. There should be an axle tag in the middle of your axle that says the exact weight rating. For a 5,200 lb axle you'll use the following: Electric Brakes - # AKEBRK-7-D Hydraulic Brakes - # AKFBBRK-7-D Hub and Drum Assembly - # AKHD-655-6-EZ-K (comes...
    view full answer...
  • Axle and Suspension Replacement for 2011 Keystone Outback 260FL
    That is correct, replacement axles are going to be your best bet since those axles and most parts are discontinued. You don't want to go down in capacity so you're looking at moving to 5,200 lb replacement axles. In order to find the correct replacement you want to match your current axle length and if possible the spring seat measurement. The length is going to be the hub face to hub face measurement. See the video below which explains where and how to measure. If the spring seats don't...
    view full answer...
  • Replacement Hubs Compatible with Dexter Mobile Home Axle
    The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2 # 8-201-5UC3 are the correct fit for your axles. This will work well for your desired tires and wheels.
    view full answer...
  • Upgrading Axle and Braking System for a 1956 Airstream Safari Trailer
    We do have the means to help get your 1956 Airstream Camper up to snuff but the axle you have on it currently is a very old design that will need to be replaced in order to use a newer braking system. Normally all of the info you gave me indicates the the axle is in the 5.2K - 7K range but you'll need to look on the tag at the front of the trailer or tag in the middle of the axle to determine this, especially since this is such an old trailer. To determine the correct replacement axle...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Hub and Drum with Bearings for Lippert NV155773 Axle with 5200-lbs Capacity
    I was able to reach out to my contact at Lippert, who was able to provide me with the specs of your NV 155773 axle, however it doesn't look like the bearings that were on this hub and spindle configuration are the same ones for the inner and outer bearing. This particular axle uses the # 25580 inner bearing and # LM67048 outer bearing, so you'll want to use a hub that uses those same bearings (or the same sized bearings) as a replacement. You can use a Dexter hub like the Dexter Trailer...
    view full answer...
    Image 1 for
  • Replacement Hub/Drum and Self-Adjusting Brake Assembly Recommendation for a Lippert 5,200 lb Axle
    For a hub/drum that will fit your Lippert 5,200 lb axles you would want the hub part # AKHD-655-6-EZ-K that have the same 6 on 5-1/2 inch bolt pattern you said you have. For a self-adjusting brake assembly for the right hand side you would want the part # AKEBRK-7R-SA and for the left hand side you would want the part # AKEBRK-7L-SA. That would be all that you would need. I attached review videos for the hub and brake assemblies for you to check out as well.
    view full answer...
  • Bearings and Drum Size for 84 and 42 Spindle
    The 84 spindle takes a 3,500 lb hub like the # 84545BX which uses bearings # L68149 and # L44649. This is a 10 inch drum. The 42 spindle takes a 5,200 lb hub like part # AKHD-655-6-EZ-K and uses bearings # 25580 and typically # 15123. This uses 12 inch drum.
    view full answer...
  • How to Determine Hub and Drum Assembly & Brakes With 6 on 5-1/2 Bolt Pattern for 10,000 lb Trailer
    Thanks for that info, and based on that I can narrow down the options for you considerably, but you will need to do a bit of measuring in order to make sure you get the right hub and drum assembly. Based on having Dexter axles and a 10,000 lb GVWR trailer it is likely you have 5,200 lb axles but also possible you have 6,000 lb axles. This means you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves;...
    view full answer...
    Image 1 for
  • Are The 23-180-181 Brake Compatible With The AKHD-655-6-EZ-K Hubs?
    Yes, the Dexter Electric Trailer Brakes # 23-180-181 will indeed be compatible with the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. The brake assemblies use the standard 12" x 2" brake shoes, and the hubs are designed to work with this same standard sized brake assembly.
    view full answer...


< Previous
123. . .10



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee John A
Installed by:
John A
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Robert C
Test Fit:
Robert C
Employee Jacob H
Test Fit:
Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.