bing tracking image
  1. Trailer Wiring
  2. Spectro
  3. Wiring Adapters
  4. Single-Function Adapter
  5. 2 Pole
  6. Plug and Lead
2 Wire Loop, 12"

2 Wire Loop, 12"

Item # 9651P
lowest price pledge
Our Price: $4.01
Trailer Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.05 lbs
Quantity: 
In Stock
9651P - Single-Function Adapter Spectro Wiring Adapters
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Lowest Prices for the best trailer wiring from Spectro. 2 Wire Loop, 12" part number 9651P can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Spectro Trailer Wiring - 9651P

  • Wiring Adapters
  • Single-Function Adapter
  • 2 Pole
  • Plug and Lead
  • 0 - 5 Feet Long
  • 2 Pole
  • Spectro


Features:

  • 2 Pole Flat
  • Wire gauge: 16
  • 12" Loop


9651 2 Wire Loop, 12"





Video of 2 Wire Loop, 12"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro 2 Wire Loop Review and Installation

Hi they do it yourselfers, today we're going to be taking a look at Spectro's 2 Wire Loop. This 2 Wire Loop will allow you to add a quick connect to any of your accessories that require two wires on your trailer. If you look at our ends here, the male exposed end on the connectors on one of them is connecting to our brown wire, and on the other is connected to our red wire. You can cut this harness in half, and then wire one end up on your trailer side, and then wire the other end up on your accessory, so that way when you plug them together, as you see here when we go to plug them together, that our wires match up red to red, brown to brown.So we're going to go ahead and wire it up now. We've got a couple of different lights here, so this way we can easily disconnect our light assemblies in case we have any damage that occurs to them, like we back up into something on accident. But you'll see here that on one light, we've just got bare wires, so we can cut it in half, wire one into our trailer, the other into our light.

But our other light here, sometimes you get lights that already have this style of connector on it. So what we can do is we can cut this in half and wire one side up to our trailer, and you could use the other side on the other side of your trailer, but you do want to keep in mind that if you we're to do that, that on one side the wire colors would be opposite.Let's go ahead and get this wired up now, and we'll show you how it works. We're going to start by cutting it in half. We're then going to wire up one end to our trailer. So we've got our brown wire, which is our tail lights, and our yellow wire here, which is our left turn and stoplight.

So what we're going to do, since we're going to be using it with this light here that has a pre-existing wire, the red wire on it is the stop, and the black wire on the light is the tail. So we want to make sure that our exposed male connector is the red wire, so that way it'll plug into this red wire.So we're going to be using this end here, we'll strip back the ends on our trailer as well as the M's on our plug, then we're going to use some heatshrink butt connectors to connect the two together. I recommend that you use heatshrink butt connectors since this is exposed on the outside. This will keep moisture from entering in the connector, ensuring a long lasting connection and preventing against corrosion. So we're going to take one end of our butt connector and wire it to the trailer side, and then on the other side of our butt connector, since we chose the brown wire, we're going to be using the brown wire from our new harness, And then our other two wires here, we're going to crimp those together.When wiring these up, the big thing to remember is that you keep track of your wire colors and their functions, because as you can see here, your wire color on your new harness may not match that of the wire on your trailer, or the accessory that you're going to be connecting it to.

We'll now heatshrink down our butt connectors. We can now take our harness that's newly wired in and plug it into our accessory, which is going to be our light here. Now our light does have an additional wire we're going to need to connect, it's a ground wire, so that just goes on a stud. So I'm going to go ahead and finish getting our lights mounted up now, and then get this ground wire attached.Now with our light fully mounted up and our ground wire connected, I plugged in our tester, and we can see everything's working properly here. Adding a quick connect harness like this is particularly useful if you had accessories that you may need to replace often.

Your breakaway switch is a great example, because you should check your breakaway switch for your braking system on your trailer every year. And it's not uncommon in a year's amount of time for your breakaway switch to experience some corrosion or internal damage on the inside and not function properly. So if it's something you're constantly replacing, you can quickly just connect it and add a new one right in.For our light here, if we we're to back up and cause any damage to the light and we needed to replace it, we wouldn't even need any strippers or crimpers or have to do any wiring, we could simply just pull our light off, disconnect it, unhook the ground, which hooks up with a ring terminal, so that uses a screw, take our new light and just put it back on, no wiring involved.Now when you are buying replacement parts to plug in your new light, or anything, you want to check to make sure that that light does have this connector. Breakaway switches, lights, and many other accessories are available that come with this type of connector on it so it can be quickly plugged into your trailer. This is also great for things that you may want to frequently take on and off of your trailer. You can make your own little harness by wiring up one end of the accessory and the other end of your trailer. Whenever you want to take it off just click boom, throw it in your truck, and whenever you want to use it again, plug it right back in. And that completes our look at the Spectro's 2 Wire Loop.


Customer Reviews

2 Wire Loop, 12" - 9651P

Average Customer Rating:  4.8 out of 5 stars   (14 Customer Reviews)


by:

TRhese are Great! I used 2 to extend the line between the solar trickle charger and battery on motorized boat lift. Also during the winter to keep the battery charged with a smaller panel on a garage window sill.Just pay attention to the conveniently color-coded wires to maintain proper polarity



by:

I needed two 12v leads to add backup lights to my trailer. Works great. Very tight connection. I cut it in half and connected one side to my trailers left and right backup lights and the other end to my truck.



by:

Hard to find 2 terminal plugs except to cut them off an old wiring harness. Thanks for carrying them!



by:

This adapter worked great to wire up a license plate light on my cargo carrier.



by:

Excellent adapter…I cut it half to use with my removable removable fenders being I mounted some extra tail lights on them for more visibility, worked out great!



by:

Thank you, your website made it easy to find several items that i was looking for and delivery was quick.



by:

Product came yesterday in a very timely manner, product was exactly like it looks in picture, great quality and I have someone installing it as I type this. So a more in depth review later on when it is installed and I will send pictures. Also the staff at etrailer is awesome they do a great job with customer service!



by:

Good quality material,very handy.I will use it to connect led marker lites to a removable truck bed panel.



by:

As described, good connectors.



by:

Great product !!!!!


Comments
Great
Craig - 05/07/2017


by:

It works as advertised!



by:

Product arrived intact and will use your company again



by:



by:

Good Product. Does what we expect.


14
14

Ask the Experts about this Spectro Trailer Wiring



  • Proper Wiring of a Hitch-Cover Brake Light so it Does Not Blink when Turn Signal is Activated
    If you want your hitch cover brake light to only work with the brake lights, I would recommend that you use a 2 Wire Loop, item # 9651P, to make a separate connector for your brake light hitch cover. Then run the white wire to ground and splice the red wire to the third brake light circuit which does not blink when the brakes are applied and the turn signals are activated. You will have a separate two wire connector for the hitch cover with this setup. At this time I do not know of any...
    view full answer...
  • Wiring a Backup Camera to be able to Move it from The Truck to the Trailer
    Typically, on a factory installed 7-Way, the center pin is for reverse lights. If there is not a wire in the center pin on the trailer side connector, you can add one and run it all the way back. I would purchase a couple of 2 Loops with connectors, part # 9651P. You can use these connectors to provide a quick and easy way of disconnecting the camera system to move it from the truck to the trailer. Depending on the camera system, you may only need the two wires, one for ground and one...
    view full answer...
  • What Gauge Wire is Used on the Spectro 2 Wire Loop # 9651P
    I spoke with my contact at Spectro and she informed me that this 2 Wire Loop # 9651P uses wire that is 16 gauge.
    view full answer...
  • Amperage Rating of 2 Wire Loop, 12" # 9651P
    The 2 Wire Loop, 12" # 9651P that you referenced is made of 12 gauge wire which has a 13 amp rating.
    view full answer...
  • Recommended Plug to add Lights to Trailer Tailgate
    In order to add lights on your trailer's tailgate that will allow you to remove it, you can use 2 Wire Loop # 9651P. What you would want to do is cut it in half and use one side for your tailgate and one side for your trailer. I've added a link to a video review for you to take a look at as well.
    view full answer...
  • License Plate Bracket Recccommendation For Trailer Hitch Mounted Cargo Carrier
    The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not that much of an issue. You could zip tie the plate to your carrier, or use a bracket with a light like part # LPL55CB (In most states, the rear license plate is required to be lit after dark). If your vehicle has a trailer connector, you...
    view full answer...
  • How to Wire Illuminated License Plate Holder to Trailer Connector
    To wire an illuminated license plate holder such as the Optronics LED # LPL55CB, you can simply splice into the running light circuit and ground wire from the trailer connector. I recommend using the 2 Wire Loop # 9651P to make these connections. This will allow for a quick and easy disconnect when you are not using the cargo carrier/rack on your trailer hitch. I have attached a couple of short video demonstrations on these products for you to check out.
    view full answer...
  • License Plate Bracket for Cargo Carrier When It's Down For Use and Up For Storage
    I do have a potential solution for you, however we don't have a folding license plate holder available that you could use in different orientations, whether your hitch-mounted carrier is down for use or folded up against the rear of the vehicle. The best option I can offer is to simply use a single license plate bracket like the Optronics # LPL55CB. You can use some wing nuts, washers, and bolts for mounting that let you easily move the bracket/plate when needed. You would drill a couple...
    view full answer...
  • Can Extension Cord Be Used Between Solar Panel Charger and Battery
    The Performance Tools 2.5 Watt Solar Battery Charger # PTW2997 includes a 9-foot cord and both a cigarette lighter style and a spring clip style extension that plug in with 2-pole connectors like those on part # 9651P. If your battery tender's cord uses this type of connector then it will plug in and function but you'll want to keep in mind that the added 25-feet of wiring will cause some voltage drop. If you happen to have a set of heavy gauge jumper cables around, something like the...
    view full answer...
  • Recommended Location to Attach a License Plate to a Tilt Easy Hauler
    I would recommended checking with your local law enforcement or state highway patrol because laws and regulations vary from state to state. On the other hand, I have seen a couple license plates mounted to the wheel fender. I would recommend a license plate frame such as # CR62032. It will show more plate in all 50 states. A LED license plate light mounting bracket such as # LPL55CB could also be a great addition especially since you are towing a easy hauler. I have included a video...
    view full answer...
  • Does Vehicle License Plate Need to Relocated When Using Hitch Cargo Carrier
    The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not that much of an issue. You could zip tie the plate to your carrier, or use a bracket with a light like part # LPL55CB (In most states, the rear license plate is required to be lit after dark). If your vehicle has a trailer connector, you...
    view full answer...
  • Replacement 5th Wheel LED Tail Light for a Round Red Light
    Thank you so much for your photos. We don't have an exact replacement light for you, but we have something very close. It's the Optronics LED Trailer Tail Light, part # STL13RFHXB. This LED light measures 5-5/8" in diameter (almost exactly what your current one measures) and has the three mounting holes. It features the 7 diodes that your current one seems to have and the same three functions. Most importantly, it's round and fully red. This is a flush-mount design, so there is a difference...
    view full answer...
    Image 1 for Image 2 for
  • Solution to Filter Out Turn Signal for Lighted Trailer Hitch Cover
    In order to make this work you are going to need to use your 4-way like you are doing right now. I'm not sure which hitch light you have, but you could potentially splice in the 3rd Brake Light Logic Module # PP20-702 on the light wiring to filter out the turn signal so the light will only activate when the brakes are applied. The other option would be to use a different hitch cover light. The Brake and Tail Light Trailer Hitch Receiver Cover for 2" Trailer Hitches # CR-007A has a built-in...
    view full answer...
  • Cargo Carrier, Light Kit, and Wiring Harness for a 2000 Honda Accord
    I will be happy to help you out. First, since all of the trailer hitches for the 2000 Honda Accord are Class I hitches you will need a cargo carrier that is rated for a Class I hitch. I have included a link to the available options for you. You will need to have a 4-Way flat connector on your Accord to activate a license plate light. If you do not already have a 4-Way you can add one using # 43105. Then you could use license plate mounting bracket and light # PM436B. The power wire can...
    view full answer...
  • Matching Connector for the Optronics Trailer Taillights # STL36RPG and # STL37RPG
    For the Optronics trailer taillights # STL36RPG and driver side # STL37RPG we do carry the style of connector it uses with the part # 9651P. You'd cut the harness in half and wire either side to your trailer wiring so that you can easily connect to the lights mentioned.
    view full answer...
  • Wiring Compatible with the LED Tail Lights with SAE 2 Wire Connector
    The SAE two wire connect is sometimes a factory connection, but you can simply cut the connector and use butt connectors like # DW05744-5 for the LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger # STL36RPG and driver side # STL37RPG if desired. If you want the quick connect, then I recommend getting the 2 Wire Loop, 12" # 9651P and cutting the middle to give you the two quick connectors you need for that lighting kit to have the quick connects...
    view full answer...
  • How To Wire Light Bar On Trailer With Switch In Vehicle
    You can definitely install a light bar on your trailer and control it with a switch in your truck. I will say that it will require quite a bit of cautiously routing wires to avoid moving/hot parts and some splicing wires as you will have to extend the light bar wires to reach that far. I will use the Buyers Products Off-Road LED Light Bar 39-1/2" Long # 3371492184 for example. For this light bar you will need the wiring harness # 3373035768. You will need to install the switch inside of...
    view full answer...

Do you have a question about this Trailer Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jacob T
Video Edited:
Jacob T
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.