bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
Dexter

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

Part Number: 84546UC3-EZ
In Stock
$187.55
Trailer Hubs and Drums
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Great Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased part number 84546UC3-EZ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (677)
  • Q & A (0)
  • Photos

Dexter Trailer Hubs and Drums - 84546UC3-EZ

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Pre-Greased
  • Standard
  • L44649
  • L68149
  • 1/2 Inch Stud
  • Dexter

This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Pre-greased hub is easy to install - no need to pack bearings
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb E-Z Lube trailer axles with #84 spindles
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 4-1/2"
  • Grease cap flange diameter: 1.986"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 10-19
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

E-Z Lube-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-247-94 Dexter Pre Greased 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2

Replaces 84546UC3-EZ





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased - 84546UC3-EZ

Average Customer Rating:  4.8 out of 5 stars   (677 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

The brake parts were all correct for my application and installation was straightforward with minimal tools needed. I did take the extra step of soldering the wire connections because that is the best way to do it IMO.

Stephen at etrailer was very helpful. He made sure I had all the right parts for my application. and they were on their way very quickly.

I will say that I tried to use my local dealer first because I like to support local businesses, but unfortunately, they were having trouble finding the right parts for my trailer. When we did find them, they were 50% more expensive for the exact same parts that etrailer supplied. I would also have had to drive 80 miles round trip to get them.

The reason for the 4-star rating is because of shipping/packing. The parts were heavy in large boxes with no packing material to hold them in place. Two of the hub sets were out of their boxes and there was a crushed grease cap. So, better packing to keep things in place in the boxes or use a smaller box would be nice.

I attached a few pics of before and after also tmy very worn hubs. You can see that eh armature is worn down to the studs and the magnets are starting to show the coils. It was time. Also a short video or timelapse that I titled, Trailer Brakes in 18 seconds

Etrailer Expert

Katrina D.

11/11/2023

I am sorry that the hubs arrived in this condition. Let me get you over to our customer service department for them to see what we can do for you.



by:

I was a bit intimidated by the thought of taking apart my hubs and had no idea where to start. But the etrailer live chat gave me a complete parts list based on my trailer GVWR, I watched a couple of videos on the website, and then spent about 1.5 hours on the job (honestly, at least 45 mins was me figuring out where I wanted to run the wire and strapping it in, then stopping to drink a beer and admire my work, with the actual hub work taking less than 20 mins apiece).

I was able to install the new whip, box, and run power to the hubs in about an hour afterwards. I then got in the truck, toggled to my trailer braking control, set my sensitivity, and went for a test drive. Works flawlessly!



by:

Bought new Dexter brakes and drums to replace the original brakes on my 1995 Haulmark car trailer. The original drums and magnets were badly worn, and I wanted to replace them before going to the car cruise in Ocean City. I received an email from etrailer.com within hours of placing the order, stating that the order has shipped! The absolute best customer service I ever had. The parts arrived within days, and the packaging was superb. Thank you etrailer!

Paul K.

9/24/2018

The Dexter parts are working great so far! Although I only used the trailer twice for about 450 miles total. Ive always had good service from etrailer. Thank you for the follow up, I appreciate it.



by:

I have had bearing failure 3 times on this trailer I own. these China made bearings are crap.



by:

Got this with a 10 inch trailer brake. Everything was as expected. I had to buy a couple nylock nuts from Menards. They are 7/16 by 40 pitch. Which is a fine thread.

Jonathan

8/23/2016

The brakes work great! Im really happy that I took the time to install them.



by:

I destroyed a hub/drum when i lost a bearing. I was able to clean up the spindle just enough for it to be salvageable and I put this new hub assembly on. So far, so good!



by:

Hi Alex,

This is NOT my first order
with you guys, there has been a few.
This order arrived on time, in perfect condition, and the replacement went FANTASTIC…….THANK YOU!!!
Every order with etrailer has been absolutely Perfect!
Keep up the Great work and customer service. E-trailer is Great!!!



by:

The brakes from etrailer were of excellent quality. They installed easily, and no adjustments were needed for the installation. After bleading the system, the brakes worked fine. I will definitely recommend etrailer to my friends and relatives needing trailer parts and accessories.



by:

Easy installation, quality parts.
During
shipment the box was busted open and one of the 4 hub/drums came out. So the box arrived taped up and 1 hub short to complete the job.
I called the contact number, great customer service. They are currently rushing me the missing hub. Thanks!



by:

Worked with Helen at etrailer to make sure the correct parts were ordered and supplied. Helen was a pleasure to work with and the hubs and bearings fit perfectly. A year later everything is still working great.
Thank you Helen and etrailer.



by:

Customer service was excellent, fast shipping and perfect replacement parts.



by:

Customer service was extremely helpful! Order arrived earlier than expected. All the new parts fit exact. Bolted on and was done in 10 minutes! Have always been pleased with every purchase.



by:

Installed perfectly and performed as expected.
This
was a switch out to a new trailer without brakes to adding Hubs & Drums with brakes. Everything worked out as planned and it was a quick change out.
Thanks for your help etrailer

Peter

7/4/2023

Everything is still working as planned. The change out for the installation of trailer brakes is as planned. I specified these parts for the brakes but also so I could add a hand brake lever when the trailer is parked. I didnt want the possibility of it rolling. Additionally, this allowed me to drill a hole through the hand brake lever to lock it against theft. The entire parts and planning worked.



by:

installed brakes on my 97 Rogue boat trailer. E-Trailer had everything I needed for the job. Trailer already had the 4-hole mounting plate for the backing plate. It was all bolt on, brakes work great. I have bought quite a few items from them over the past few years, including an axle assy with brakes for another boat trailer, 2 brake controllers and also a trailer hitch for our older Lexus suv. I am very satisfied with there service and quality of there merchandise.



by:

We have been going camping out West snd Southwest for five years now. Pulling 2003 Jayco 12 Sd popup behind 2006 Chevrolet Express 2500. A lot of mountains. Big Mountains. I noticed that the hydraulic brakes on the camper didn't work properly. I have tried to adjust them multiple times but it didn't help. I decided to replace them with electric brakes . It looked like etrailer had exactly what I needed. I ordered the electric brakes assembly first and then hub and drum assembly. Had to take some measures for the brake plate mounting and also get part numbers of the old bearings in the hub. All parts arrived two days after order was placed. Amazing. All the parts were there. . I am not the greatest mechanic but I was able to install them fairly quickly. Installation videos on etrailer website and YouTube were very helpful. We just went on our first camping trip this year. Only two hours drive. It seems that everything works fine I can feel that new brakes actually work. Thanks to Nicole at etrailer for helping me with this order.



by:

I purchased a used cargo trailer. We used it in October to go to Colorado on a hunt. We had a horrible time with the brakes failing. I tore it down this Spring and found there were no brakes on the front axle. I started checking around locally and could not find the parts I needed. I found etrailer online and took a chance and ordered(something Idon’t do shop online)the parts I was sure I needed. The parts arrived Tuesday and I installed them today. Everything was just as advertised and the fit was exact. Now I just need to get two new tires and wheels and the trailer will be ready for our trip to Colorado this year. Thanks E-Trailer.
John



by:

Reassembly of parts went perfectly, I made the right choice with etrailer !!



by:

Who doesn’t love a 20 minute hub change with bearings and grease?? I sure do and replaced all my hub bearing assemblies with these. It took about an hour and I was back on the road. I drove our TT about 150 miles over the weekend and it did great! Thanks to the staff at ETrailer for going above and beyond with the sale as well!



by:

Great Price on a new brake drum for my Casita. Included everything - bearings, seals, dust cap, retainer, axle nut and lug nuts. Did not include the washer, but that's no big deal (I have a few extra!). Arrived much faster than expected, too. Got my Casita back on the road after a bearing failure that scored the inside of the hub. Great price and good service from etrailer! I must also mention that etrailer has so much good INFORMATION and tutorials as well. There might be other online sites that have it for a penny cheaper, but they don't have the information you need to get the job done right. Thanks again etrailer!



by:

Parts r good quality fit good would order from trailer again



by:

Really detailed helpful videos made installation a snap. I put brakes on a trailer that didn’t have them.

A word of caution. Unlike the brake kit, the drum kit only does one wheel. So if you order a brake kit and a drum kit you don’t have enough to do two wheels.



by:

Put new brakes, drums, bearings and seals and hubs on boat trailer found all parts here and received really fast always order parts for trailers here and always will



by:

The drum/hub comes with everything needed including two types of bearing caps. One with a rubber plug and a standard metal cap, this helps if you have a grease fitting on your axle. Especially love the packaging eTrailer uses, product arrived without any damage. Thanks eTrailer!



by:

The Dexter brakes and hubs are great - a bit pricey but far and above the no-name brands. There was one problem with the order (well 2 actually), they only shipped one brake in the package so there go my plans for installing the new hubs and brakes this weekend. This was an order for left-and-right brakes and two hubs. Mistakes happen so I'm not real upset about it. I'll update this review when I see how customer service handles this.

The second problem is the packaging. Nothing was damaged, which surprises me, but the two Drums and one brake were in their own boxes inside a bigger (huge) box with no peanuts or anything to keep them from flopping around. I lifted the box up on end so I could pick it up to carry it back to my work shed. When I did, it almost rolled out of my hands because the contents shifted so violently. When I got back there and opened the big box, the three smaller boxes were piled atop each other at one end.

FORTUNATLEY, they made it through the carrier's system, of which I am very familiar since I worked there for years. I was shocked they did. Better care when packing into larger boxes would go a long way.

Five stars for the products. Three (average) for the care in shipping the order.



by:

Everything worked out well and are good replacements for existing drums. My only issue was the nuts and washers were too large for my spindle. Luckily my existing nut and washer were in good condition and could be reused.


25
677
Show More Reviews

See what our Experts say about this Dexter Trailer Hubs and Drums

  • Replacement Brake Assemblies and Hubs for 2017.5 Lance 1685
    Hey Brad, thanks for all of the info on what you have. I can tell your magnets are basically toast, the brake pads look thin, and your hub/drums look like they are in bad shape too so your best option is to go with new assemblies left and right with the part # 23-468-469 and then new hub/drums too which for that you'd need the part # 84546UC3-EZ. This is going to be the longterm solution that will take care of everything for a very long time.
    view full answer...
  • Hub & Drum That Fits 2,200 lb Timbren Axle-Less System
    There is one hub and drum that will fit the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Off-Road Tires - 2,200 lbs # ASR1THDS02. The correct part is the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ. The # DX68XR says it is for 3,500 lb axles, but is also the correct fit for this 2,200 lb Timbren system because it has the correct bearings and seal to fit the Timbren spindle. Then for electric brakes what you will use are the Electric Trailer Brake Kit #...
    view full answer...
  • Recommended Surge Brake Compatible Weight Distribution System for a 3,000 lbs Trailer
    We sure do! It looks like your TAB 320 S Tear Drop Camper tops out a 3,000 lbs which would give it a tongue weight range somewhere around 300 lbs depending on how you load it. For a surge brake compatible weight distribution system, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA92-00-0450. This system works with trailer's that have up to a 400 lbs tongue weight so you won't feel like it is overcapacity. It has built in 2 point sway control that will keep...
    view full answer...
  • Dexter Replacement Hub/Drum Assembly # K08-247-1G
    Yes, for Dexter part number K08-247-1G you'll need the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # 84546UC3-EZ.
    view full answer...
  • Will the Dexter 10 Inch Hub and TruRyde 10 Brake Assembly Work Together?
    Yes, they are. The Dexter Trailer Hub & Drum Assembly item # 84546UC3-EZ and the TruRyde Electric Trailer Brake Kit item # TRU36FR are both compatible. The Hub comes individually you will need two per axle and the brakes come as a set so you will only need one per axle. Hopefully the information below answers your question about the 4 holes base. The Hub and Drum Assembly item # 84546UC3-EZ is compatible with trailer's that use inner bearing item # L68149 (1.378" inner diameter) and...
    view full answer...
  • Timbren Axle-Less Trailer Axle with Brake and Hub/Drum Assembly Recommendations
    Since you're needing to add electric brakes to your T@B trailer you want to go with the Timbren # ASR2KHDS01 which has the brake mounting flange whereas the Timbren # ASR2000S01 doesn't have provisions for the brakes. Then for brakes you can use the Dexter Axle Set # 23-468-469 and then 2 of the Hub and Drum Assembly # 84546UC3-EZ. Attached are some installation videos for you to check out!
    view full answer...
  • Can The UFP Hub/Drums HD-1377-10 Be Resurfaced Or Will They Need Replaced?
    Based on images I could find it would appear the maximum internal diameter is 10.09. This information should be stamped on the drum itself. If you do not have any dimensions stamped on your drum they should not be turned and will just need to be replaced with the Dexter Trailer Hub and Drum Assembly # 84546UC3 that you already found. We also have this hub/drum as an EZ Lube # 84546UC3-EZ if you have the grease zerk on the end of your spindles.
    view full answer...
  • Recommended Timbren Suspension, Hubs, and Electric Brakes for an Overland Trailer
    Since you are setting up an overland trailer, I recommend going with one of Timbren's Heavy Duty Systems like the Timbren Axle-Less Trailer Suspension item # TASR1THDS04. This system has a 4" lift, a 4 bolt brake flange, and has a 2,200 lbs capacity. With this system you can add the Dexter Trailer Hub & Drum Assembly item # 84546UC3-EZ. This hub has a 5 on 4-1/2" bolt pattern. This hub will work great with the Dexter Electric Trailer Brake Kit item # 23-26-27. If you have a different...
    view full answer...
  • Recommended 95" 3,500LB Drop Axle For a Tandem Axle Trailer Build
    Dexter is a great company and provide a made in the USA product. It really depends on your preference and how long you plan on keeping the trailer. I am a build it right the first time kinda guy so I would go with 2 Dexter Axle # 7685269, 4 Hubs # 84546UC3-EZ and 2 of the Nev-R-Adjust Electric Trailer Brake kits # 23-468-469.
    view full answer...
  • Parts Needed To Add Electric Brakes Onto a 3,500LB Dexter Axle Without Brakes
    The Dexter Electric Trailer Brake Kit # 23-26-27 is the correct kit for your Dexter 3,500lb torsion axle studs. This includes both the left and right hand side brakes for one axle. It does not include a hub. I do recommend looking at the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 instead as the brakes adjust while you drive saving you on having to adjust the breaks as they wear. This also maintains a more constant brake feel with less adjustment required on the vehicle...
    view full answer...
  • How To Add Brakes to a Aluma 6812H Utility Trailer
    In order to add brakes to your Aluma 6812H Utility Trailer you'll need a few items which I have attached a list of for you below. Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles part # 84546UC3-EZ Junction Box # 3375601101 7-Way Connector # H20046 Hopkins Engager Push-To-Test Trailer Breakaway Kit part # 20099
    view full answer...
  • Should Trailer Hub/Drum be Replaced if it Has 1/8" Groove
    A trailer hub & drum should be smooth, and should not have any groove in it. A 1/8" groove is pretty concerning and you should replace the drum right away, turning them won't work. I have added a link below to our selection of hubs which you can filter to find the right one, like for a 3,500 lb hub and drum the Dexter # 84546UC3-EZ.
    view full answer...
  • Is There a 5 on 4-1/2 inch Bolt Pattern Hub Available for Timbren Axle-Less ASR2KHDS03
    The Timbren Axle-Less system is compatible with hubs that have 5 on 4-1/2 inch bolt patterns. For just an idler hub you would want the part # 84545UC1-EZ or for a brake hub you would want the part # 84546UC3-EZ.
    view full answer...
  • Replacement Hubs For A 2020 Coachmen Catalina 323BHDSCK
    I can certainly point you in the right direction. Hub/drum assemblies are not listed in our fit guide as they are not a custom fit item. Unfortunately we do not have literature that will tell us hub specs based on a year make and model of trailer. If only it were so easy. The best way to find the correct hub is for your to remove one of the current hubs and confirm some specs. Specifically we would need to know the inner and outer bearing sizes/numbers, and the bolt pattern. We would also...
    view full answer...
  • Are Dexter Trailer Brake Hub/Drums Sold in Sets for Both Sides of the Trailer
    Since trailer hub/drums can fit either side of the trailer (unlike brake assemblies like the part # AKEBRK-35-SA that you referenced) we don't sell them in sets of two for either side. You'd just need to order a quantity of two and you'd have one for both sides of your trailer. For a Dexter 3,500 lb axle you'd want the part # 84546UC3-EZ.
    view full answer...
  • Replacing A Hub With 8-407 Imprinted On The Front
    It certainly does. What you have there is a hub for a 4,400 lb axle. To replace it you will need the # 8-407-5UC3-EZ. This includes the hub/drum, new bearings, races, grease seal and lug nuts.
    view full answer...
  • Replacement Hub/Drums and Brake Assemblies that Fit Rockwell 3,500 lb Trailer Axles
    Yes, the Dexter Nev-R-Adjust brake assemblies # 23-468-469 and the Dexter Hubs part # 84546UC3-EZ wil fit on your current Rockwell axle. Rockwell was bought out by Axletek which is why we know their axles are compatible with Dexter hubs. When wiring up the assemblies be sure to use 10 gauge wire like part number # 10-1-1 which we sell by the foot.
    view full answer...
  • Does Dexter Actually Manufacture the Dexter Brake Drum Assemblies for Dexter Axles
    Dexter is a manufacturer and not a distributor so yes, Dexter does actually manufacture their brake drum assemblies like the # 84546UC3-EZ.
    view full answer...
  • Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
    You do not need to add additional grease to a Dexter trailer axle hub that came pre-greased. It has the correct amount in it and is ready to be used. Adding additional grease will most likely blow out the grease seal.
    view full answer...
  • Can Timbren Axle-Less Suspension System Work With Off-Road Tires?
    There is a 2,000 lb capacity Timbren Axle-Less Suspension with 4" Drop Spindle # ASR2KHDS09, though not a 1,200 lb one. I am not certain what you are referring to in terms of "strong enough" but it will work with 3,500 lb rated hub and drum assemblies # 84546UC3-EZ as well as 3,500 lb brakes. If you were referring to your trailer being strong enough, if you do not have a crossmember above where you want to install the Timbren one will need to be added, or you can reinforce your trailer's...
    view full answer...
  • What Lug Nuts Does the Dexter Trailer Hub and Drum Assembly Use
    The Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles # 84546UC3-EZ use a 1/2"-20 lug nut like # CE11051. If you wanted long closed in lug nuts, you could also use # KALN1375S.
    view full answer...
  • Replacement Hub/Drum and Brake Assemblies for Dexter 3,500 lb Trailer Axle
    Since you have 3,500 lb trailer axles the brake assembly set part # 23-468-469 that you referenced is the correct set for self adjusting assemblies. Then for hub/drums you'd want the part # 84546UC3-EZ which comes with all bearings and seals you'd need as well.
    view full answer...
  • Dexter Axle 10" Replacement Hub and Drum with 5 on 4-1/2" Bolt Pattern and Long 1/2" Studs
    Thanks for reaching out! The closest hub and drum assembly we have to the specs you're wanting is the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles # 84546UC3-EZ which uses 1/2" studs that are 2-1/4" long. This same kit is found with a galvanized finish as part # 8-247-50UC3-EZ if that better suits your application. None of our hub and drum assemblies use longer studs than that as 2-1/4" should be sufficient for any wheel that works with that hub/drum. Attached are some review...
    view full answer...
  • Will Trailer Hub and Drum # 84546UC3-EZ Fit an ALKO 3500 Pound Axle
    I read through the other question you sent and I can clear some things up for you. First, the ALKO axle brake mounting flanges have a different bolt pattern than do Dexter or similar assemblies when you go up to a 12 inch brake assembly and that is why they will not fit ALKO axles. The top mounting holes on an ALKO mounting flange are wider than they are on a Dexter. But on a 10x2-1/4 inch brake assembly the 4 bolt pattern should be the same. So you can use other 10x2-1/4 inch assemblies...
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Rick A
Installed by:
Rick A
Employee Andy C
Installed by:
Andy C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.