Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76046

lowest price pledge

Retail:$230.53

Our Price: $124.95

You Save: $105.58
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 44 lbs

Quantity: 
In Stock
76046 - 5000 lbs WD GTW Draw-Tite Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Draw-Tite
  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • 675 lbs TW
  • Custom Fit Hitch
  • Concealed Cross Tube
  • 5000 lbs WD GTW
  • 675 lbs WD TW
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76046 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (94)
  • Q & A (47)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76046

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 675 lbs
      • Maximum TW when used with weight distribution: 675 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76046 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame



76046 Installation InstructionsInstallation Details 76046 Installation instructions

This Product Fits The Following Vehicles

2017 - 2019 Chrysler Pacifica excluding Hybrid



California residents: click here


Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2017 Chrysler Pacifica

Today on our 2017 Chrysler Pacifica, we're going to take a look at and also show you how to install the Draw-Tite max frame custom fit class 3 trailer hitch receiver. It offers the 2 inch by 2 inch receiver tube opening, it's part number is 76046. Here's what our hitch is going to look like installed. As you can see something I like about this hitch, our cross tube stays pretty hidden up behind the fascia. That's different than what we've seen from some of the other hitches. Whereas that's going to come over here to our receiver tube opening, this is 2 inch by 2 inches. Reinforcement collar around in there looks nice and neat.

Got our safety chain connection points that come out here. We've got oval shaped openings that kind of run along in line with the vehicle. Then it should be plenty of room there for you to connect whatever style chain you might want to. See in this hitch there are 2 holes in the receiver tube itself. The one closest to the front of the vehicle is the one that we're going to use to secure all of our items with. That's five eighths of an inch in diameter and you'll see there's plenty of room there even if you wanted to use a locking hitch pin or anti rattle device.

Now one of those anti rattle devices available is called J Pin stabilization system. That's the only time we use that hole closest to the rear. You'll want to ensure anything you do use in you five eighths hole is rated for class 3 use. Now a class 3 hitch is an extremely versatile hitch. It's going to work out for cargo carriers, for bike racks, hauling trailers, whatever you might want to use it for there should be an application available in class 3. Now the hitch offers a tongue weight rating of 675 pounds, that would be the maximum downward force that we would put here at the receiver tube opening.

It's going to offer a 4,500 pound gross trailer weight rating. That would be the total weight of your trailer and anything you we're to load up on it. It is rated for use for weight distribution. The tongue weight's going to stay the same at 675 pounds. The gross trailer weight however it goes up to 5,000 pounds.

You will want to consult the owners manual on the Pacifica, figure out what it's tow rating is and use whichever numbers are the lowest. You'll see the Draw-Tite also has a bracket that's been welded onto it already for attachment of wiring. They have 3 pre-drilled holes so you can use a couple different brackets we've got here whether you're using a 7 poles or a 4 pole and get that connected there without having to purchase additional brackets to go around the hitch. Now a few measurements that'll be helpful in selecting you ball mount rack or hitch cargo carrier will be from the center of our hitch pin hole to the outermost edge of our bummer, it's about 4 and a half inches. Then from the ground to the inside top edge of a receiver tube opening, we've got about 12 and a half. That being the case we do recommend choosing accessories that have a rise in the shank just to promote better ground clearance at the rear of whatever accessory you have loaded up. Now to begin our installation we need to get this exhaust lowered down and out of the way a little bit. We've got three hangers that we'll use to do that. It's going one located right here inside the tail pipe area. It's a good idea to spray these down with a little bit of spray lubricant there. Usually helps those slide off better and we bring the tail pipe forward here. It's going to be one in this flat spot. We may or may not need to remove the one located right over here. Now before we do drop those, we'll want to put a strap underneath it just to give that exhaust some support, like that. Then we've got to pry bar here, you could also use a large screw driver. Just want to get those kind of pushed off this end there. Then we'll just put a little bit of slack in the strap there. That'll allow that to come down where we can get some tools in here and work. Next thing we're going to do is get our heat shield removed so we can trim it and put it back into position. See we've got the 4 plastic nuts. The white one's going to be above the exhaust, just made to handle a little higher temperature. We've got one, two, three, and four connection points. Then you'll just pull down. Now in the instructions it's going to tell us measure down 13 inches. It's going to put us about right above this hole and then measure in 5 and cut it. But that's a really tough cut to make, might risk cutting your finger. What we're going to do is cut straight across at 13 inches and we're not losing any protection with that. Now the texture of the heat shield itself, there's a little dimples there and those create a pretty straight line so we'll just go right across those. We'll come up just above that connection point there. Now you can use aviation sheers to cut this. You can use a little cut off wheel, whatever you've got handy. Now we can set this portion aside and we'll get this portion reinstalled. Now it's time to get our hardware put in position. We've got 3 attachment points on each side. We're going to be using the oblong hole that's here closest to the rear. You got the rectangular shaped hole there then the square hole there. Now for the rear holes we're going to use the smaller of the square hole spacers. For the one closest to the front we'll be using the longer one. Now to get our hardware into position we're going to be using the pull wire. We'll just place that in the hole, direct it forward to that furthest forward attachment point that's going to be our access hole. Just going to slide on one of the spacers. Thread on one of the carriage bolts. We'll slide those in separately. Pull them back just like that. Now for the forward attachment point we want to use the reverse method so we'll put our block on then thread on our carriage bolt. We'll put the bolt in first. Follow that up with the block then bring it right back down through. Now we're going to do the same thing for the passenger side. Right now we've got our pull wires attached here to our bolts still. You can leave those on, put them through the appropriate holes in the hitch and then use these to guide it up into place. I find it's easier to do it without them. Simply because then we don't have to try to hold the hitch up and remove the pull wire. But it's up to you. If you're going to do it this way you definitely don't want to push the bolts back up into the frame. Now with the help with an extra set of hands. We'll want to get the passenger side started up over the exhaust first. Then we'll raise the drivers side up into position. When our carriages bolts to come down through. The first thing we'll do is place on a conical tooth washer and want to make sure the teeth of that face up towards our hitch. Then we can thread one the hex nuts. Be sure we get one started with about 3 or 4 good turns. We can let it rest there while we get the other side going. Now we'll go through and snug down our hardware. Now with everything snugged down it's time to go through and torque each of our bolts down to the appropriate specifications. Those are listed in the instructions. Now we use a little bit more spray lubricant and we'll get our exhaust lifted back up into position and slide these isolators back in place. Then we can take down the strap and our hitch will be ready for use. With our exhaust back in position that's going to complete our installation of the Draw-Tite max frame custom fit class 3 trailer hitch receiver. Part number 76046 on our 2017 Chrysler Pacfica.


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76046

Average Customer Rating:  4.8 out of 5 stars   (94 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

- 76046
by:
2017 Chrysler Pacifica

PACKAGING WAS TERRIBLE. BOX CAME OPEN ON THE END AND BOTTOM. IF THE BOLTS WERE NOT TAPED TO THE HITCH THEY WOULD BE GONE. THE HITCH WAS OVER HALF OUT OF THE BOX. DIRECTIONS WERE NOT AS NEEDED FOR THE INSTALL 608154


Comments

Were sorry to hear that the box the hitch was packed in was in bad shape when it arrived to you. If you click on the link Ive provided, you can see a video showing the hitch being installed on a 2017 Pacifica. I hope the video is helpful for you.

-- Mike L - 02/26/2019

49904

- 76046
by:

I haven't installed it yet but it to write very fast 613490



- 76046
by:
2018 Chrysler Pacifica

Perfect fit, install video was dead on and super helpful. Fits great up in the bumper so the look is very nice and OEM like from the back. Was able to install this without lifting or even jacking up the van. A pair of Jack stands will make installing this by yourself a bit easier. Very happy overall. 603907



- 76046
by:

Fit was good and kit was required. Fishing technique to get the screws through was easy and the online video made things much easier. Noticed that upon install, hitch looks to be angled down more than expected, had to buy riser to bring up 6 inches. 525669



- 76046
by:
2017 Chrysler Pacifica

Great products with detailed reviews, hitch options and installation instructions Fast free shipping. Low prices Yes Perfect!! 564019



- 76046
by:
2017 Chrysler Pacifica

WOW what can I say..... I was trying to figure out what the exact hitch I needed for my 2017 Pacifica. My search took me directly to etrailer where I found a video showing my car, even the same color and the correct hitch. A few clicks later the hitch and lighting package was on its way at a very competitive price! In just a few days it arrived and it is a beauty. We will install it and be ready for my new trailer. Thanks a big bunch 469530


Comments

Great

Dick - 01/25/2019

48887

- 76046
by:

This isn't the first time I've done business with etrailer.com, and certainly won't be the last! Bought to 2" hitches for the SUV and the minivan, and both are QUALITY. Installed in under 30 minutes, and bound to last a lifetime. Great products, great price...I highly recommend, especially versus some of the other installers. Got a buddy that's a mechanic (or handy with the tools)? Buy here, take there, and BLAM...save $100 or more!!! 382298



- 76046
by:
2018 Chrysler Pacifica

Great Product. Great Price. Fit perfectly. Great support Friendly Personal 583771



- 76046
by:

I had a great experience I spoke with Ashley on the phone and she was very helpful and my shipment was here on the day that she had promised. I will be using E trailer again in the future 568750



- 76046
by:
2017 Chrysler Pacifica

I don't consider myself a mechanic and looked at the 45 minute completion as not probable. The instructions were clear with figures appropriate. There were some discrepancies between the description and the actual look of the underneath. An number order for removal of screws and nuts would be helpful. Process took me about 3 hours but that accounts for picking up some tools after I had already begun. I didn't have a lift or ramps so used my driveway slant with a couple of 4x4 boards to lift the back of the car. All in all the threading of the wires went easier than anticipated particularly since the bend of the wire from shipping in the bag created a natural flow for the tip to reach the holes. 508028



- 76046
by:
Chrysler Pacifica

I installed this hitch with help from my mechanic. You can do it alone but much easier to have someone hold it in place while you thread the bolts. I deliver auto parts with my Pacifica so in the year I've had the hitch on it, I've put 130,000 miles on it and lots of rock salt here in western PA. Surprisingly there is very little surface rust on the hitch. This is my second hitch from etrailer and probably not the last. 476540



- 76046
by:
2017 Chrysler Pacifica

Very good looking/high quality hitch. Video was extremely helpful, and fishing the hardware thru the frame is a easy as it looks. Definitely have a second set of hands to help mount the hitch and align all the hardware. As other have mentioned, trimming the under body panel was not in the video and I cut significantly less of the panel than the instructions show. I installed this on a Limited with the hands free tailgate. I re-mounted the sensor toward the drivers side so it's not blocked by the hitch tongue. Chrysler sells a bracket to do this (68275630AG) which also adds another sensor so you can kick on either side of the tongue, but that was over a hundred bucks - no thanks! 550784



- 76046
by:
Chrysler Pacifica

The hitch arrived just one day after ordering. Amazing service! It's exactly as described. I like that the cross tube is hidden. It will be primarily used it for a bike rack. I had it installed by a professional, and it all went well for them. They appreciated the clear instructions (the downloaded pdf file, not the sheet in the hardware pack) and the installation video as it was the first Chrysler Pacifica they had done. This is the second hitch that I purchased from etrailer.com. They are a good company to do business with. 573137



- 76046
by:
2017 Chrysler Pacifica

Trailer hitch and wiring harness came quickly and in good order. Hitch fit car perfectly. However, the wiring harness connectors would not fit through the body panel because of internal supports and tail light wires, so I had to cut it and splice it under the car. Harness needs to be redesigned to fit through the small channel under the tail lights. Connectors were far too big to be pulled through. 498463



- 76046
by:

Straight forward install. Fits good with no issues. Tip on the hybrid make sure you get the sk kit and you can reuse the same ground stud after the hitch is in place. 561269



- 76046
by:
2018 Chrysler Pacifica

Great product, fast shipping, good price. 2h to install, worst part of install was sound dampening panel under van, otherwise very straight fwd. Great video on etrailer to guide install. Customer pics to modify panel much less then recommended was great and allowed minimal modifications. 2018 Pacifica touring S. Nice and low profile receiver that sticks tight under bumper and blends well. 568755



- 76046
by:
Hyundai Elantra

This is my 2nd hitch install, the last one being on my Elantra Hatch. It took me 3 hours to install. I installed the hitch in my driveway. I did not use a lift or ramps. There was enough ground clearance for me to reach everything under the car. Pros - This is a very heavy duty hitch. You can tell the build quality is great and its quite heavy. - The bolts and nuts that come with this hitch are some of the best I have ever used. The nuts screw on very easily. This is surprisingly very rare for bolts from the big box stores. - The video from etrailer is great, I am not sure I would have been able to install this without it. I watched it multiple times during my install. Cons - and this the 4 stars are all based on how difficult this is to install. None of which is the hitch's or etrailers fault. 1. You have to remove plastic under body panel on the Pacifica which is not in the video but is in the instructions. As other reviews have stated there are 3 screws hidden behind the driver rear tire that are very hard to get to. 2. Dropping the exhaust still made it very hard to access that side. 3. The instructions are basically worthless, but etrailer makes up for that with the video. 375964



- 76046
by:

I have NOT open the box yet but it seems well protected. Easy order process and superfast delivery. I ordered it on a tuesday around 11am and got the product on thursday at 10am two days later and free. Prety happy about it so far 482805



- 76046
by:
2017 Chrysler Pacifica

Hitch looks good on car not a lot hanging down, just sq. tube. As for instructions I would add removal of Left rear wheel to get at 3 bolts holding on shield makes it easier. 336378


Comments

Looks good works great

Bob S - 01/28/2018

33867

- 76046
by:
2012 Chevrolet Volt

Excellent fit. Working with no hoist on concrete floor took me 1 1/2 hr. working alone. Fit just as advertised. ——————-————————————————————————————— Electrical wiring a bit more involved, a hoist would be good. The challenging part is running the 12 volt wire to the battery with the removal of the underbody panels required. Still excellent product. Both videos helpful. 499992



- 76046
by:
2017 Chrysler Pacifica

I ordered a towing hitch and wire harness for my 2017 Chrysler Pacifica. Etrailer was the only website that had it in stock because of how new the product was. Product arrived in a timely manner without shipping charge. Well worth the money I spent. I wouldn't recommend that a lay person attempt to install as It took my mechanic 3 hours. The hitch itself was easy but hooking up the wiring was very time taking as you must take a lot of the under bladder off to run a wire to the battery. Also not much room to make connections to rear taillight. 293796



- 76046
by:

Very solid construction especially on the weld points. The hitch barely noticeable from the back end of the vehicle which makes it seem like its not there (nice). Good anchor points for chains and I love the wire harness mount in case I decide to wire through there. Installation was sort of a pain because the video doesn't go over removal of the undercarriage protector and cutting that. However, the instructions did a good job of giving you cutting dimensions. I spent 1.5 hours doing this alone due to the cutting involved. If you are installing alone, use some jack stands to hold up hitch while you get it onto your bolts. A battery powered impact driver or ratchet go a long way. finger tighten first then hit it with the power tool. 439077



- 76046
by:
2017 Chrysler Pacifica

I haven't installed the receiver yet but so far I am impressed with the speed of the delivery and the condition of the hitch. I will be having mechanics install it on Sunday. I will show them the video of the installation for 2017 Chrysler Pacifica if necessary. 377041


Comments

As a follow up, the hitch is installed on our Chrysler Pacifica and looks better than other aftermarket hitches I have seen around here. A local garage put the hitch on the car, and the only thing that slowed him down was just how much to cut off the catalytic heat shield. I dont know if he had ever watched the video of the installation procedure on line. Cost about $110 to install.

-- Mike H - 07/24/2017

26542

- 76046
by:
2017 Chrysler Pacifica

Have not installed yet. looks good but packing was bad , falling out of box when recd. Paint scrapped off must touchup before install. 560530



- 76046
by:
2017 Chrysler Pacifica

Absolutely love the quality, the clean look, and the ease of installation that this hitch has. Many other people in this review forum are complaining about that the install video for this specific piece 76046, didn’t review how to get the initial panel off, or how to cut it. #1, the instructions include information regarding this, so read them. #2 it’s a matter of removing some screws, not terribly difficult. However, the install video for the product 36798 contains every step of taking the panel off. So check that out!! That is just a different hitch for the 2017 Chrysler Pacifica. I had myself and one other person help for the instal. Everything from removal of the first screw to putting the final screw back on during install took just over an hour and a half. Would have taken longer without the extra set of hands. The video was more than enough to be able to do the install yourself. Don’t waste time or money having somebody else install for you. I did it in my driveway and have VERY limited experience working on cars. Couldn’t be happier with this product. Shipping was fast. Didn’t get the electronics as I need the hitch for bike and extra cargo racks. Glad this hitch comes with the mount and option of getting electronics later if needed. 552638



- 76046
by:
2017 Chrysler Pacifica

The video available from eTrailer was very helpful in understanding how to install the hitch on my 2017 Pacifica. While the instruction document included information on removing & cutting the underbody panel, there was no mention of it in the video. Using a floor jack, and a little help from a second person, I installed the hitch on my vehicle in my garage in around 3 hours. After removing the underbody panel, and working with the hitch, I found that I didn't have to cut the heat shield as much as identified in the instruction (and referred to in the video), and I significantly reduced the amount of the underbody panel that I cut out (maybe just a third of what the instructions indicate) which meant I only cut out one of the fasteners in the underbody. In case this is helpful for anyone else, I've included pictures of the changes I made). 541302



- 76046
by:
2018 Chrysler Pacifica

The installation was easily done. The hitch is mostly hidden. Highly recommend the Draw Tight for your towing needs on a 2018 Chrysler Pacifica Touring Plus model. 459218



- 76046
by:
2018 Chrysler Pacifica

Excellent hitch for the 2018 Chrysler Pacifica. Easy to install and it rides high under the bumper giving a nice finished look. The hitch was delivered two days after ordering. Etrailer continues their history of great service. 517702



- 76046
by:
2017 Chrysler Pacifica

received my hitch in 3 days, standard shipping! delivered to my door in perfect condition, unscratched and dent free. instructions for the hitch and wiring harness were clear and easy to follow. the hitch looked so good its a shame it isn't in a more prominent area. 308780



- 76046
by:

This is the second time I've ordered this hitch and and the second vehicle I've added it to and it works great! I added this to two of my 2017 Chrysler Pacificas to haul my 18' bow rider and haven't had any problems. Class III gives me peace of mind. Great price! 645116



- 76046
by:

Good fit, easy installation, but I feel the amount of material instructed to remove from heat shield and under pan is excessive. I think the company needs to invest in providing templates that remove least amount of material as possible. I was conservative and have excellent fit on both components and could mass produce templates from material used. 636982



- 76046
by:

Shipping was fast and everything fit up and installed as per your video. Thanks 629115



- 76046
by:

Great hitch and easy to install. My daughter and I installed it with no problems 627954



- 76046
by:

Loving the trailer hitch. Works perfectly still after a year. 621530



- 76046
by:

No problems with the hitch. Has served it's purpose well. 618030



- 76046
by:

The hitch looks to of good quality. But when it comes to the directions installing it, you might try to make them more understandable. I needed to find a video online of how to install this hitch. That made it a lot easier in the end. 613968



- 76046
by:

Trailer hitch instructions did a great job in describing the installation of the hitch and cutting shields and trimming panels was described for correct clearance requirements, in all job went easily and finished installation looks great. 612269



- 76046
by:

Just received everything is fine, Happy with the products. I gave it 4 stars only because the box was damaged and the wireing was out of the box, but all was there. Thank you for your prompt service. 608904



- 76046
by:
2018 Chrysler Pacifica

Easy, fast and great . The videos make everything easy. Thx etrailer 605175



- 76046
by:

Always a pleasure to deal with and lightning speed shipping! 599701



- 76046
by:

Good fit for my new Pacifica. Trim instructions for the under carriage panel around the new hitch were not adequate. f Fine quality product. 590774



- 76046
by:
2017 Chrysler Pacifica

Great hitch, perfect fit ,fast; damage free delivery. The videos help understand the install. Company is first class. You may pay just a little more, but with the customer service and product arriving in undamaged condition is well worth it. 573755



- 76046
by:
2018 Chrysler Pacifica

Great product, easy install, and fast shipping. Insallation video really helps! 569725



- 76046
by:
2018 Chrysler Pacifica

The receiver was exactly as advertised. The video on the retailer website was first rate, well done, and everything I needed to do the job. Yes, you need a little mechanical know how to get the receiver installed, but it went on smoothly and exactly as advertised 549159



- 76046
by:

Looks great easy install. 543704



- 76046
by:

Ordered a hitch and bike rack. Both products were great and delivery was fast. 528356



- 76046
by:
2018 Chrysler Pacifica

Very happy customer here. Great instructions, super fast shipping! Install took about 2 hours and wasn't as bad as expected. 523017



- 76046
by:
2017 Chrysler Pacifica

Very happy with the product. Even more impressed with the communication and follow-up from etrailer.com. 516772



- 76046
by:
2017 Chrysler Pacifica

Hitch fits great directions and video were helpful. 514666



- 76046
by:
2017 Chrysler Pacifica

This hitch was easy to install, with the help of my son, I was pleased to the number of fish wires, very little modifying to the van. very pleased with product. 513465


63
107
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch


  • Recommended Trailer Hitch Receiver for 2018 Chrysler Pacifica Hybrid
  • I reached out to my contact at Draw-Tite, and you are correct that they just added that adapter. We are adding it to our site to give you the fit you are seeking for your 2018 Chrysler Pacifica Hybrid. This will require purchase of the Draw-Tite Max-Frame Trailer Hitch Receiver # 76046 and also the kit # 76046SK. For your trailer wiring, I recommend the Upgraded Circuit Protected ModuLite with 4 Pole Harness and Hardwire Kit - Includes Tester # 119179KIT. This kit draws power directly...
    view full answer...

  • Trailer Hitch and Towing Accessories Recommendation-2017 Chrysler Pacifica
  • The Curt # C13383 Class III trailer hitch includes all necessary installation hardware, which is shown in the photo you provided. Might I make a suggestion? I recommend going with the Draw-Tite Class III, part # 76046 which is a similar design of comparable quality at a more reasonable price. The Draw-Tite hitch also includes all necessary hardware. If you plan on using the hitch for towing purposes, you'll need a few other items to complete your towing system: Trailer wiring harness,...
    view full answer...

  • Trailer Hitch and Wiring Recommendation for 2017 Chrysler Pacifica Touring
  • I can't find any info on a 2017 Nissan Pacifica. Is that a sub model of a different vehicle possibly?
    view full answer...

  • How Does Draw Tite Hitch 76046 Fit 2018 Chrysler Pacifica Hybrid
  • To install the Draw Tite hitch # 76046 on your 2018 Chrysler Pacifica Hybrid requires the shim kit part # 76046SK. I attached the install sheet I got from Draw Tite that shows hows it is used to install the hitch. Basically it is used relocate the carbon canister so that the hitch will fit properly.
    view full answer...

  • Trailer Wiring Harness to Fit a 2017 Chrysler Pacifica
  • There's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have: Draw-Tite part # 118712 fits the Limited, Touring L, and Touring L Plus models. Draw-Tite part # 118723 fits the LX and Touring models. Curt part # C56322 fits the Limited, LX, Touring, Touring L, and Touring L Plus models. There are also two Class III trailer hitch receivers: Draw-Tite part # 76046 fits non-hybrid models Curt part...
    view full answer...

  • Difference Between Draw-Tite Hitches for 2019 Chrysler Pacifica Hybrid and Non-Hybrid
  • Draw-Tite trailer hitches # 76046 and # 76046-SK are essentially the same hitch except # 76046-SK includes a bracket kit that's for relocating the carbon canister on the hybrid model of the 2019 Chrysler Pacifica. The relocation kit by itself is part # 76046SK. I've attached a picture of the extra brackets. We haven't heard anything specifically about the hands-free lift gate not working after the hitch is installed. Looking at the location it doesn't appear that it would except right...
    view full answer...

  • Ground Clearance with Curt Trailer Hitch Installed on a 2017 Chrysler Pacifica Touring L
  • Curt Trailer Hitch Receiver # C13383 will be directly under the rear fascia on your 2017 Chrysler Pacifica Touring L once installed. If you measure from the bottom of the rear fascia down 2-1/2 inches that is approximately where the bottom of the hitch will be. Then you can measure from that point to the ground for a close approximation of ground clearance. Based on some of the other hitches available for the vehicle it looks to be about 10 inches from the ground to the bottom of the hitch. You...
    view full answer...

  • Recommended Trailer Hitch and Wiring Harness for 2018 Chrysler Pacifica Touring
  • The trailer hitch I recommend for your 2018 Chrysler Pacifica Touring is the Draw-Tite # 76046 because it has the highest tongue weight capacity among all hitches that fit your vehicle, which speaks to its strength, and because of Draw-Tite's strong reputation for making high-quality products. The Draw-Tite # 76046 is a Class III hitch with a 2" receiver, 675 lb tongue weight capacity and 4,500 lb towing capacity. It is a complete bolt-on installation so there is not going to be any...
    view full answer...

  • Ball Mount Recommendation for a 2018 Chrysler Pacifica Touring L and Class III Hitch
  • For trailer hitch # 76046 and your 2018 Chrysler Pacifica I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer...
    view full answer...

  • Best Way to Carry Cargo with 2018 Chrysler Pacifica
  • For a 2018 Chrysler Pacifica that has dual sliding doors the Yakima DryTop Rooftop Cargo Bag # Y07404 is not an ideal option - dual sliding doors are prone to cause interference. The best way for you to carry cargo on an '18 Pacifica is by using a trailer hitch and hitch-mounted cargo carrier because it will give you plenty of room to carry a large amount of cargo and is simple to use. The trailer hitch I highly recommend for your 2018 Chrysler Pacifica is the Draw-Tite # 76046...
    view full answer...

  • Towing Capacity for 2018 Chrysler Pacifica and Recommended Trailer Hitch and Wiring
  • I took a look at the online version of the owner's manual for your 2018 Chrysler Pacifica and it states that for this vehicle without the factory tow package it can pull a trailer that weighs up to 1,500 pounds. For models with the factory tow package this capacity jumps up to 3,600 pounds. I highly recommend verifying this information in your copy of the manual as well. If you do not yet have a trailer hitch installed I recommend the Draw-Tite Class III Max Frame # 76046. This Class...
    view full answer...

  • Does Trailer Hitch for 2019 Chrysler Pacifica Touring L Plus Affect Hands-Free Liftgate
  • That's a good question, but you will absolutely still be able to use the hands-free liftgate on your 2019 Chrysler Pacifica Touring L Plus with the Draw-Tite Trailer Hitch # 76046 installed. You will likely need to kick your foot to one side of the hitch receiver but that's all. This is a great choice for a hitch on your '19 Pacifica because not only does it not require any drilling into your car's frame to install, but it also has a concealed crosstube, as you can see in the accompanying...
    view full answer...

  • Recommended Trailer Hitch for 2018 Chrysler Pacifica
  • Both the Draw-Tite Class III Trailer Hitch # 76046 and the Curt Class III # C13383, which are confirmed to fit your 2018 Chrysler Pacifica, will require that the heat shield is trimmed/modified for proper installation. In both cases the heat shield does get reattached after the hitch is in place. Even when trimming the heat shield, your vehicle will still be protected because the installed hitch will essentially be taking the place of the trimmed off portions. Between the two hitches,...
    view full answer...

  • Best Hitch, Wiring, Bike Rack, & Cargo Carrier w/Lights Recommendation for a 2017 Chrysler Pacifica
  • Great news! I can help you with all those things for your 2017 Chrysler Pacifica. First let's start with a hitch for your vehicle. I recommend the 2 inch Class III Draw-Tite # 76046 hitch, because of its higher weight capacity. This 2 inch receiver hitch will be more compatible with accessories on the market. It is also compatible with the Limited, LX, and Touring models. For the wiring for the cargo carriers lights like the Pro Series # 63153 with LED light kit # 98174LED, you...
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Kathleen M
Expert Research:
Jeffrey L
Test Fit:
Randy B
Video Edited:
Chris R
Written by:
Alexander C
Photos by:
Jeffrey L
Test Fit:
Shane H
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.