Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (236 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an E-coat base and a powder coat finish provides excellent rust protection.the the draw Tite Hitch Receiver perfectly clears the spare tire, which is why I bought this version to replace the square tube one from years ago for my Toyota 2013 Highlander. Had a flat and the spare would not lower or clear the Hitch. This round tube version allows for spare tire storage and removal. Very nice. Powder coat could be better but I am satisfied.
Arrived as planned, and it took about 2 hours to install on my 2010 Highlander, 89k miles, garaged, used mostly by my wife. I guess at 75 i am getting slower doing mechanic work, so younger mechanics should only take half that time. LOL Just use two floor jacks and you don't need a helper. There was a good video of the installation that was very helpful. So, yes, you and the products you sell get the 5 stars.
Everything lined up correctly for install. Installation will probably make you swear unless a second person is involved because its awkward. It was not complicated however and the Installation guide video was perfect. Would buy again.
2008 Toyota Highlander. Drawtite 75726 hitch. Easy installation. 9 bolts total. One bolt wouldn’t line up until I torqued all the other ones in place. Use a torque wrench. Instructions said 42ft lb, so that’s what I did. Perfect fit with 19” spare tire and wheel. I kept the spare in place for trailer hitch installation; no problem whatsoever.
Followed the instructions to completely remove the driver side plastic wheel well piece. The passenger side was removed for installation of hitch, and then reinstalled.
There are a three things that really stood out for me. First, the installation instructions were easy to follow and involved little "trial and error". Although having three people guide the hitch into place for initial attachment is recommended. The wiring harness was easy-peasy! Second, I use this hitch mostly for pulling light loads around town, but, the week after installation I pulled a 12' tandem-wheel cargo trailer full of furniture over 800 miles through three mountain passes without a problem. Third, and more service related, the self-help tips on etrailer's website are invaluable.
I bought this to put on my 2008 Toyota Highlander Sport. It's a very nice, well built hitch. It fit perfectly, even with my full size, 19 inch, spare tire. The only complaint I had about it was the packaging. The box arrived via the brown truck and was torn at both ends by the edges of the hitch, which caused the hitch to have a few nicks and scratches to the paint. The delivery driver even apologized for it. I contacted etrailer.com via email. Their customer service was great, responding in just a few hours. We worked out a solution. This hitch is very well made. It's welded together and the bolt holes lined up perfectly with my Highlander's. It's heavy and awkward, so I do recommend two people to put it on. Installation was easy...my 13 year old nephew helped me. You could probably put it on by yourself, but two people make it easier as you have to lift it over the exhaust pipe. The video tutorial was definitely a plus! One thing I had to do that the video didn't show was to remove the cover on the tip of the exhaust pipe. I know not all models have one, but the sport models do. It's easy to remove by loosening the bolted on clamp. I didn't have to lift the rear of the Highlander up, either. There is plenty of room to get underneath the vehicle to work and do this (I'm a big guy). The hitch also has a plate welded onto it near the receiver so you can attach a mounting bracket for the wire harness if you want to run it to the outside of your vehicle. I used the mounting bracket (Item 18144) here: . It comes with locking screws and fits perfectly. Overall, this is a solid hitch that is priced well and looks great! I had thought about buying the OEM from Toyota, but I'm glad I didn't. This one is just as good (if not better) at only a quarter of the cost and I didn't have to pay anyone to install it. I will definitely be doing more business with etrailer.com! Great prices and customer service you can't beat! P.S. Sorry, but it was raining a little when I took the pics.
Hitch was made very strong and fit very well. The instructions to install were accurate and complete. Hardware was all present and of good quality.A friend and two jackstands helped me to install. Also, put back of car up on 4 inch ramps.
Bought the Draw-Tite trailer hits together with the Swagman XTC4 4-bike rack. Bought based on reviews on e-trailer and other sites that this is a sturdy and good-working combination for carrying 4 bikes.
* Delivery: Fast (<5 days)
* Packaging: Package had holes, which is not unusual as the box with the hitch has a lot of empty spaces. Others had same issue, but nothing to worry about. The hitch cannot really break easily and the hardware is safely stored in the 2inch receiver.
* Installation: Very nice video instructions on etrailer. Installation really can use two people, but it's fairly easy with two people. Had some problems with one of the nine screws to bite although I did a try run before mounting the hitch. Worked after some minutes of wiggling the hitch so that the screw got the correct angle to bite.
* Usage: Installed the day of delivery and used it the next day. It's the first time I used a trailer hitch and for sure the first time I used to carry 4 bikes. Stopped looking in the rear-view mirror after 1 minutes seeing that it's barely moving at all. So with a limited use so far I can confirm other's reviews of this combination and I think it works great. Recommended.
Hitch is super heavy duty. Fit was fine and install was easy for anyone with a little mechanical skill, and for anyone with some experience on cars or trucks a treat to install. All parts came correct. Bike hitch fit in and stayed in with minimum wobble. Thank you
Research has brought me to etrailer.com to find the best hitch for my vehicle. I own a 2009 toyota highlander which is the hybrid limited model. I choose this hitch particularly because of the added tongue weight. 750 or 500 lbs... you decide which is better. This hitch has extra mounting tabs, so it doesn't just mount to the bottom of the frame but also the sides of the frame. It took 2 days to receive and less time to install. 45 minutes with 2 people. Do note that if you
have mud guards than they must come off. I didn't remove the tail pipe to install, just man handled the hitch over it. Also, there is a tab on the back side of the facia in front of the exaust tip that has to go under the hitch. The bolts included with the hitch were a different size than what the manual says. They aren't 17mmm, they are 16mm. Overall the install went well so don't be intimidated by it if your not mechanicly inclinded. The wiring was really easy to install and as you can see in the picture I ran it through a hole in the body. I cut a small slit in the grommet and gently pushed the small end through so that any water won't come through. Worked like a charm.This was an aawesome experience!
Finally, the hitch mount is installed on my 2013 Toyota Highlander, you would need 10mm, 14mm, and 16mm, and 6" socket extender. In the manual, it said you need, 10mm, 12mm, and 14mm. Installation was easy, only 9 bolts, two persons makes job easier but i did the installation by myself. It took one hour or less. The hitch fits my vehicle steel frame bolts patterns perfectly so no issue with the install.
The Trailer Hitch came damaged in that the black covering on the square connector was partially torn off. I had given the hitch to my gas station who installed it but unfortunately did not inspect it before giving it for installation. They showed the damage after they had installed it. I guess I will have to live with it but not happy that it was damaged in transit.
Had no trouble installing the hitch or wiring harness. The video helps a lot. Instead of having the lights connector lay in a tray I chose to use the plugged hole that was below the side tray and have the cable mounted outside the vehicle.
Installed with aid of the video. Hitch fit perfectly. My 19 inch spare tire fits like it should with no interference from the hitch. Paint was peeling on one of the arms that attach to the frame, I will go back and touch it up later. My highlander is a 2009 sport, original owner. I am 75 years old, so if I can install,you can too.
Leeza was a big help as this is my first hitch purchase and her expert advice made me a confident shopper.
Delivery was exceptionally prompt and arrived for my birthday. Promised and delivered.
Our 2008 Highlander Hybrid with 7 seats fits most of our family needs and now will haul bikes and a camping trailer!
I ordered etrailer hitch for 2008 Highlander on 5/1/2017 the hitch arrived on 5/2. Incredibly fast service fantastic quality and with your video easy to install with two people. Last but not least it fit perfectly.
THE HITCH IS MUCH MORE ROBUST THAN I THOUGHT IT WOULD BE. MY WIFE AND I PLAN TO INSTALL IT TOMORROW. BEING 69YRS. OLD WILL MAKE IT A BIT MORE DIFFICULT, BUT MY WIFE ASSURES ME SHE CAN HANDLE HER END. SO FAR EVERYTHING SEEMS GOOD. ALL THE BOLTS AND WASHERS ARE THERE AND EVERYTHING IN THE WIRING HARNESS APPEARS TO BE THERE. I'LL LET YOU KNOW HOW IT GOES, WITH PHOTO'S. THANKS.
MARVIN AND THELMA
Marvin L.
5/13/2023
Great, my wife and I love it. We wired the trailer in and everything works perfect. Not bad for a 69 year old. It saved me lots of money. Thank you.
Bought a Curtis hitch from Amazon first. Holes did not line up impossible to install and I sent it back. Went to E-Trailer and got a Draw-Tite hitch. Wife and I installed it in about a hour It was a perfect fit. Curtis hitch’s are a a piece of junk just look at the reviews.
Product was easy to install. Easiest hitch I ever put on. Bolts right up with no drilling. Would recommend to anyone. Perfect for pulling my boat and vintage camper
Good product. Works Great. You do need to be able to "stretch it out" with a jack to get it to fit the holes.
Great service fast shipment. Great product and easy installation, had it on and ready to tow in 20 minutes.
After balking at the cost to have an auto-shop add a trailer to our Toyota Highlander, we found etrailer.com and decided to take a chance. The "how to" videos factored considerably in our decision to buy ... they made it look so easy! And surprise! It really -WAS- that easy. We used standard block-type ramps (the kind you can buy for $40 ) to get the SUV up off the ground high enough to get underneath to do the work. Everything came off as easy as it was showed in the videos. Other than the fact this bar is a heavy so we had our teen daughter help hold it steady while we bolted it into place (i.e., get help for when you go to lift it), it went super smooth. Thanks for saving us $280 over the cost the car dealer quoted us! P.S. - be sure to watch the linked videos so you get the right trailer lighting attachment and ball hitch for your new hitch.
Anna
5/20/2019
We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.
Hitch just fits right, strong made I really recommend it. Bought one 7 months ago and now I bought another one.
Hitch fit perfectly to my 2008 Toyota Highlander, and installation was easy. The box was slightly damaged when it arrived (holes in the cardboard) and there were a few spots on the hitch where the paint had scratched. I let etrailer know and they gave me a $XX credit to purchase rust-resistant paint to touch up those spots.
Excellent design and construction. The L-shaped brackets attaching to the frame are very sturdy. The fitup was good - I used a couple of jack stands and had no problem installing it by myself. Etrailer send two links for installation videos for the hitch and wiring harness. The videos were very clear and helpful. I generally ignore instructions, they quickly discovered with the wiring harness that it was not intuitive. I definitely recommend watching the videos before starting.
Products arrived quickly and in good condition, except that the box was broken open. Like other have commented, the hitch is not padded with bubble wrap, but who cares? It's a trailer hitch! It is designed for a lot worse treatment than UPS will deliver on its worst day ever.
Tom D.
10/17/2017
Still a 5 star, has held up fine. Thanks. Tom
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Wayne W.
10/10/2023
The Draw -Tite hitch has worked just fine for the year plus I have had it. So heavy duty it should last a life time. On two 1500 mile trips everything stayed in place and no wobble noticed driving with a few saftey bunji cords in place to make sure bikes were secure. Its always smart to have a back up to anything. Wayne Whitaker