bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. 2 Inch Hitch
  4. Class III
  5. 4500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75547
Our Price: $199.94
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75547 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (590)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75547

  • 2 Inch Hitch
  • Class III
  • 4500 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 675 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
    • Maximum tongue weight: 675 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

75547 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87440 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75547 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75547

Average Customer Rating:  4.8 out of 5 stars   (590 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Quality products, everyone I have purchased has been a perfect fit, love the installation videos

John V.


great,,excellent quality

2009 Honda CR-V

Delivery was speedy and hassle free. The hitch fit my 2009 Honda CR-V perfectly. The videos provided were very helpful for smoothing over the installation process. I definitely had to scrub the rust and gunk out of the frame holes since my car has over 100k miles on it. The only complaint I have is that one of the 4 mounting bolts sent with the hitch was a 16 mm head instead of 17 mm. The threads were the same but I was livid struggling to tighten a 16 mm bolt with a 17 mm socket before I noticed that it wasn’t the same. I don’t blame for that mixup. It was likely a manufacturing mistake. The hitch looks good either way and I’m excited for my new Hollywood E-bike rack that I just put on it.



Fantastic! I’ve been using the hitch to pull a trailer and it has performed like a hitch should. I’m very happy with my purchase!


A great experience on.sll counts. The website was extremely easy to locate multiple trailer hitches for my 2010 Honda CRV and verify the correct fit. It was very easy to comparison shop for price and specifications. I especially like that the website provides links to product review videos, and installation videos.

Communication by throughout the order and shipping period was excellent. I knew when my order was received, and expected to arrive, when it was shipped, and when it was delivered. And it was delivered by the day predicted. They also had great satisfaction follow up. What can you say? These folks are great.

The Draw Tight trailer hitch is superior quality. The construction is bomb proof and pretty, and the fit is perfect. The design is also very superior, with a u-bolt that allows for easier installation, cut outs for accessing the muffler hanger bracket, Grade 8 bolts and washers, and more. The installation instructions were complete, very simple and clear.

I would suggest the instructions include a required tool: a 10mm fine x 1.25 metric tap. I included a photo of the one I needed to clear out the threads on the frame nuts.

The packaging was adequate and not overkill. The box and packaging protected the product during shipping and the hardware was cleverly shrink wrapped in the receiver box to prevent loss.

Great experience and good price.

2008 Honda CR-V

I could not be more pleased with this trailer hitch! All the necessary hardware was included, the directions were concise but sufficient, and the installation went without a hitch, because that hitch is now securely attached to my Honda CR-V. The trickiest part was figuring out for the first time how to remove the exhaust pipe from its hangers, but some WD-40 and a flathead screwdriver for leverage worked just fine. If you have someone else around to help hold it in place while threading the bolts, it'll be easier. I managed to prop the hitch up and rest it on my legs while fastening it, and I'm none worse for the wear. I'm stoked to once again be able to use my bike rack and hit the trails!



Its worked without a single issue over the past year. The ultimate test was when I had to have my CR-V towed out of a garage a few straps connected from the hitch to a Jeep did the trick, no problems. Theres a little bit of rust forming on some parts of it, thanks to the winter weather, but its purely cosmetic.

2009 Honda CR-V

Well made, good looking hitch that was very easy to install. Total time to install was about an hour. Despite several attempts to do it on my own I did need an extra set of hands to hold the hitch while I got the first bolt in place. Video instructions were perfect. Exactly what I was looking for to attach a hitch mounted bike rack on my Honda CR-V. Saved me several hundred dollars from having a dealership or [rental trailer company] install it. Definitely recommend!



Still working perfectly. I’ve kept a bike rack attached to it the entire year and no problems. Works exactly as I expected it to. Definitely recommend.


Purchased this hitch a year ago. It was super easy to install and has been working great. The quality of the materials is excellent especially the powder coat. If I ever need to purchase a hitch again this will be the only place I look.


Hitch was great. Shipping took its toll on the box and also the powder coat on certain parts of the hitch,but it will all be underneath the car and unseen. Sorry I couldn't do a 5 star.

Etrailer Expert

Katrina D.


Even though this hitch will not be seen, it is still important to make sure those paint chips and/or scratches are covered up. I deeply apologise for how this arrived. I would recommend covering those scratches with a rust-o-leum type of paint, there is a link below with some more information for your reference. I also have sent your information over to our customer service department for them to look into some sort of compensation.


Hitch is well made and fits perfectly. Installation was a challenge due to severely corroded nuts (on the vehicle). It was also difficult working solo while laying on my back in my driveway to position and hold the hitch in place while securing the bolts. Total time to complete install was approximately 5.5 hours.

2011 Honda CR-V

Packaging is inadequate, look at past reviews and you can see it has been an ongoing since 2017. The hitch is placed into the cardboard shipping container with no further protective packaging. The hitch mounting brackets were both sticking out of the cardboard box when it arrived, with the powdercoating chipped down to bare metal.

The main round tube of the hitch also had scratches down to bare metal in several areas. stated to me that "The hitches are shipped to us from the manufacturer stacked one on top of another and they can scratch each other up." So they shipped out an already scratched up trailer that only got worse do to their poor packaging.

If you live anywhere that rust is a concern beware. solution is to cover the areas of bare metal with spray paint "this recommended touch up process should be repeated a few times a year and I feel would be sufficient coverage for the bare portion of the hitch itself". You are paying for a superior powdercoat finish but will end-up with a mismatched spray paint finish. Not to mention having to touch it up several times a year. offered a $[XX] refund on the hitch that I could use to buy spray paint to cover the scratches and gouges. This is a NEW item that is supposed to be ready to install. The install time is listed as 40 minutes, that wont even be long enough for your first coat of spray paint to dry.

The $[XX] is so you can go purchase spray paint. Alternatively, etrailers offered to mail me a can of spray paint. I requested the $[XX] refund AND the can of spray paint be mailed to me to compensate me for the extra time and effort that I would be needed in getting my NEW item ready to install. They refused to do the refund and send the required paint. Stating they could only do one or the other.

The final option was to return the hitch I already have and they would send a new one. They already stated they receive from the manufacture already scratched. However, doesn't take the time themselves to correct the scratches with spray paint and expects their customers to fix their laziness. On top of it all they try to blame UPS for the damage when they place a 40+ lb hitch loose in a cardboard box and ship it across the country. "Please keep in mind that sometimes the box damage happens after the order leaves our warehouse when it is in the hands of UPS."

If you don't care about rust, aesthetics, or your free time, and love spray painting and Do-It-Yourself projects this might me the hitch for you!

2008 Honda CR-V

This thing is beefy enough to make you think our CR-V could almost pull a load, but no. I'm just needing a hitch for a capable bike rack, and this has the highest rated tongue wt. Which is far beyond what I need. It's a very beefy hitch, nicely powder coated, will install easily.


Great website! It matched the right trailer hitch to my car make, model and year. The fitting was 30 minutes, all parts matched and bolts were there. Very, very warmly recommended supplier, website and (oh, did I tell you?) a fantastic hitch!

Herman F.


Still going strong, still being super happy about the hitch, still no rust or wear! Yes, continue recommending you opt FOR THIS ONE!

Etrailer Expert

Mike L.


@HermanF That's awesome! We're glad the hitch is still working well for you...


It works great and looks nice! Fits perfectly on a 2011 Honda CRV. Installation was mildly difficult due to low clearance but nothing horrible. The installation video was very helpful. The product packaging was a bit damaged on delivery and the hitch itself had some scuffing on it but I painted the scuffed parts with some protective paint. I am very happy with the hitch and would recommend it. etrailer sells accessories for the hitch as well.

2011 Honda CR-V

We recently purchased a trailer hitch for our 2011 Honda CRV. The hitch we purchased from is well built / very substantial unit and was a breeze to install. The only thing is when it arrived, one of the hitch ends broke through the end of the box and was not protected. Thankfully the hitch end wasn't damaged. I highly recommend this product and purchasing through

Jeff A.


Love it. No problems to date. No rust either.

2011 Honda CR-V

Hitch took over a week to get. It arrived on my door stoop with one end sticking out of the box. However, it was not bent or damaged. I installed it in about an hour. I installed it on a 2011 Honda CR-V LX.
I had to lower the muffler by removing the hanger bars from the rubber grommets to get access to the weld nuts on the right side of the vehicle. There wasn't any rust on the frame or weld nuts, but I did clean out the weldnut threads by running a tap through them. Then threaded in the four M10 bolts by hand, and then attached the 3/8" U-bolt. I hand tightened all the bolts to make sure the hitch was aligned. Then I torqued all the bolts and U-bolt nuts to specifications. I re-attached the muffler hangers into the rubber grommets and it was done.



Everything is working great after 1 year!

2008 Honda CR-V

DrawTite hitch for my Honda C-RV was the best combination for ground clearance, tow GVWR, vertical weight specs and a nice little tab to mount the electrical plug. It was very easy to install, etrailer had the best price with no shipping cost, and I ordered it on 7/11 and received it on 7/17.

Jeff F.


Everything has been functioning well with many trips with a 5x8 trailer. The only issue has been the j-pin I ordered from the same company. The pin helped greatly to reduce the noise of a rattling hitch in receiver tube but The combination of the j-pin nut and pin hole in the hitch being too close to a hitch weld joint prevented tightening the j-pin nut on a flat surface. This is a minor design flaw which I solved with a 14 thick washer with a notch ground out to give the nut a flat surface to mate against and avoid the irregular weld surface.


The hitch was installed as described. The instructions to install the hitch were easy to understand and follow. It is build strong and funtional.



Great! I like it. It works great!



This one was easy to install and works perfectly with the cars existing lighting system.


Easy to install, works great for Bike towing or small Uhaul runs. I dont use it for any heavy hauling but works great for my use.

Very happy

2010 Honda CR-V

This product exceeded my expectations. It was shipped promptly and was not hard to install. The only problems I had were that the captive nuts in the frame had rusted enough that I had to re tap them to get the bolts to start. This is not unusual for a car of this age and is not an issue with the product itself. It was fairly easy to install by myself and would be very easy for two people. I am 76 years old and if I can then think how easy it would be for a younger person.I'm very satisfied.

by: 05/16/2024
2008 Honda CR-V

solid product


I required a hitch for my car back in February 2013 from etrailer and was amazed by all the wonderful help I received. My concern was ordering the wrong hitch but you took me by the hand and guided me right through it. Shipping was very quick and it was delivered even placed in my garage.

I have told all my friends about my wonderful experience and if I need further items of this nature I will return to etrailer. I'm a 100% satisfied customer. Thank you so much.

2007 Honda CR-V

This entire experience was great. First it was easy to find the right hitch (75547) for my 2007 Honda CRV on the website, then the installation video gave me a realistic idea of what it was going to take for me to install it. When I ordered the hitch came quickly. The installation process went exactly like the video. Using the spray lubricant on the rubber muffler mounts was a great tip. Be sure to use a torque wrench (I had to borrow a friend's). I was amazed how much more I had to tighten the bolts before the torque wrench "clicked." Now my wife and I can load our bikes on our new "trailer hitch" mounted bike rack without muscling them up on the roof the way we've been doing for 20 years! The only negative was that one arm of the hitch punched through the shipping box it arrived in. I was worried some of the hardware might have fallen out. Turns out all the hardware is taped inside the 2" hitch opening before shipment, so everything was there. Thanks.


It fit my 2010 Honda CRV perfectly. The etrailer installation videos were very helpful. I couldn't get the hitch receiver bolts to start in the frame weld nuts even after repeated spraying with penetrating oil and scrubbing with a nylon brush. I was about to give up. I checked e-trailer again and I found a video for cleaning corroded weld nuts with a battery terminal wire brush. I was skeptical it would work but after careful twisting in the weld nuts I was able to clean the weld nuts without damaging the threads. Great tip!


I received the package on Monday but only had the time to open it. I installed it this morning and it took me an hour and a half.

I started with a prayer, as always, and it was very straightforward from there. I also viewed the youtube instructions a few times. That was very helpful.

I backed my vehicle onto a pair of steel car ramps to get more room to maneuver. Per instructions I took the exhaust off its hangers and with the help of a 2-ton trolley jack I lifted the hitch into the proper height and loosely fastened the 4 bolts. I installed the U bolt last and tightened the 4 bolts one at a time.

I have nothing but sincere appreciation for the manufacture of the product. The holes are precise and there was no fighting it to make everything fit. If only everything was made this way!

I had to do it today. Tomorrow I turn 65 and I intend to stay greaseless and not crawling under a car!

Thank you so much. The delivery was quick and the product is excellent. I am enclosing some pictures. I should have taken some while I was working on it.

2010 Honda CR-V

Awesome. I chose this hitch after watching several installation videos of various products. This was easy to install, with no special tools required. Saved a lot of $'s with this product. Our use will be for a bike rack, which works great. Hitch is well hidden bike rack is not on the vehicle. Will definitely purchase another hitch from etrailer when we have a new car.


Love this hitch! Went in in about an hour with the help of my friend, his tools & knowledge.

Already have my bike rack on it and plan to use the chain attachments (one of the reasons I bought this hitch) to anchor my paddleboard in the back!

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Hitch Weight for a 2011 Honda CR-V
    I'd be happy to help! All of the hitches for your 2011 Honda CR-V weigh relatively the same when it comes to the different classes, and while the Class I hitches definitely weight lighter I recommend using a Class III hitch since they have a 2" receiver and can handle a wider variety of accessories. Out of the hitches listed below I recommend the Draw-Tite Hitch # 75547 since it's a Class III hitch with a weight of about 27 lbs. Here are the rest of the hitches: Class I Draw-Tite -...
    view full answer...
    Image 1 for
  • Trailer Hitch, Bike Rack, and Wiring Recommendation for 2010 Honda CR-V
    I recommend the Class III Draw-Tite Hitch, # 75547, for your 2010 Honda CR-V. A Class III hitch provides more versatility with its 2 inch receiver opening. This hitch has a gross trailer weight capacity of 4,500 pounds and a tongue weight capacity of 675 pounds. Just a reminder, you will want to follow the weight limitations of the component with the lowest rating. This would include the towing capacity of your Honda or any accessory that you mount in the hitch. If you are interested...
    view full answer...
  • Recommended Trailer Hitch Receiver And 3 Bike Rack For 2007 Honda CRV
    To use a 3 bike rack, you will want a larger hitch. The Class I hitch you referenced 60869 will only allow 2 bikes to be carried on a 3 bike rack and has been discontinued. I recommend you upgrade to the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 75547 that will give you a much greater capacity as well as many more accessory options. For a bike rack, I have a couple recommendations: For a 3 bike hanging rack, I recommend the Thule Helium Pro 3-Bike...
    view full answer...
  • Class III Trailer Hitch Recommendation for 2009 Honda CRV EX-L
    For your 2009 Honda CR-V we have the Draw Tite trailer hitch part # 75547 which is a confirmed fit and will work well. It's a Class III, 2 inch hitch made by the same company as Reese. Install of this hitch is pretty simple if you have basic tools and mechanical skills. I attached an install video for this hitch on a 2009 CR-V just like yours for you to check out. Install would be about 40 minutes and the wrench sizes needed are 17 mm and 11/16 inch.
    view full answer...
  • Hitch Extender Limitations For Bike Rack
    If you have a class III hitch receiver like # 75547 on your 2011 Honda CR-V then you'll be able to use an extension # C45795. Extensions will cut your hitches weight capacity in half so if you have a class I hitch like # C11555 you shouldn't use the extension. If you wanted to get more out of your extension, I would recommend getting the Kuat pivot 2 # PVP20B. This will give you FULL access to your back hatch whenever your parked getting ready for your ride or relaxing after a day on the trails.
    view full answer...
  • Installation Instructions for EcoHitch Hidden Hitch 306-X7291 On a 2008 Honda CR-V
    I have attached the installation instructions of the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7291 for a 2008 Honda CR-V to this answer page for you. In regards to installation, this is a bolt-on fit with a very clean finished install look. It has a hidden crosstube so you only see the receiver tube once installed. Please note, you do need to trim the rear bumper fascia for installation but this is because of the hidden design. If you don't want to trim then I recommend the Draw-Tite...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • RockyMount MonoRail 2 Platform Rack for 2009 Honda CR-V
    A hitch adapter like the Brophy Hitch Adapter 1-1/4" to 2" # HTAD allows you to use the 2" shank on the RockyMounts MonoRail 2 # RKY10004 on the 1-1/4" on your 2009 Honda CR-V, but using a hitch adapter of any type reduces the tongue weight on your hitch by 50%. You'll need to check your owner's manual to confirm but you likely have a Class I hitch with a 200-lb tongue weight, so using an adapter will only allow you to carry 100-lbs total safely on the hitch. Since the RockyMounts MonoRail...
    view full answer...
  • Replacement Hardware Kit for Trailer Hitch that Fits 2008 Honda CR-V
    We do have hitch hardware for a 2008 Honda CR-V that uses a U-bolt like you are in need of. What you'd want is the part number # RHK and on the product page enter the part number # 75547 as this is a hitch that fits your vehicle and uses a U-bolt. Since hitch install hardware is one time use it would be best to get all new hardware anyway. If you can find a different part number on the hitch let me know though and I'll see if there's a better part number to get.
    view full answer...
  • Class II or Class III for 2010 Subaru Legacy Ground Clearance
    Honestly, going with a 1-1/4 inch hitch is only going to gain you 3/4 of an inch of increased ground clearance which is pretty minimal, I'd recommend going with the more versatile Class III hitch. If you're concerned about the bottom of the hitch receiver hitting the pavement, you could use a skid wheel like # UF48-979020 which mounts to a 2 inch receiver, and will work whether or not you have an accessory mounted in the hitch. I'd recommend going with the Curt Class III hitch, part #...
    view full answer...
  • Draw-Tite Cover for 2 inch Reciever on 2008 Honda CRV
    The Draw-Tite Class III Trailer Hitch, item # 75547, is the correct hitch for your 2008 Honda CRV. This hitch does not come with the Draw-Tite Hitch cover. The cover with the Draw-Tite Hitch Logo is available as item # DT7010, but does not include a band to secure it when not installed. You would need to stow the cover in the vehicle when the hitch is in use. This cover is installed by just pushing it into the receiver and does not require hardware or tools for installation.
    view full answer...
  • Troubleshooting Hitch Install Bolts Not Threading Into Frame Rail Weld Nut
    We get this question quite a bit and the issue is really that the threads end up with quite a bit of corrosion and dirt which prevents the bolt from threading in. I attached a couple help articles that cover cleaning out weld nuts for you to check out but typically using a thread tap will get the threads cleaned. The size bolts are M10X1.25X30 CL8.8.
    view full answer...
  • Recommended Trailer Hitch and Carrier With Ramp for 2009 Honda CR-V
    According to your owner's manual your 2009 Honda CR-V can hold up to 850 lbs of passengers, cargo, and trailer tongue weight. The trailer tongue weight is the same as the cargo carrier and lift. The strongest hitch we carry for your vehicle is the Draw-Tite # 75547 which is my recommendation for your application. This hitch by itself is rated for a maximum weight of 675 lbs tongue weight. If you will be carrying the power chair on the interior of the vehicle we don't have a carrier...
    view full answer...
    Image 1 for Image 2 for
  • Can Draw Tite Hitch for 2007 Honda CR-V Carry Motorcycle Carrier
    The Draw Tite hitch part # 75547 has plenty of tongue weight capacity for carrying a motorcycle carrier. It has a 675 lb tongue weight capacity. If you are in need of a carrier we have the etrailer carrier part # e98873 which has a 500 lb weight capacity, has plenty of tie down anchor points, and comes with a ramp for easy loading. I attached a review video for more info as well. For a lock then you might want the # e99047 as well. Then for a cushioned tie down set the part # SS6-SL14...
    view full answer...
  • Carrying More Than 2 Bikes with Class I Hitch on 2010 Honda CR-V
    The hitch and bike rack manufacturers all agree that a bike rack installed in a Class I receiver should be limited to two bikes. The weight is not the only issue, any additional bikes added will put the load of the rack and the bikes further away from the receiver opening. As this distance increases, so does the leverage applied to the hitch and its attachment points to the vehicle. This leverage can bend and eventually break the hitch or cause the hitch attachment points to the vehicle...
    view full answer...
  • Fit of Carpod Walled Cargo Carrier on 2011 Honda CRV w/ Hidden Hitch Trailer Hitch 87440
    The Hidden Hitch 87440 was discontinued and replaced with the Draw-Tite # 75547 which is the same design so you will have measurement of 3 inches from the hitch pin hole to the outer bumper. The 23x47 Carpod Walled Cargo Carrier for 2" Hitches - Steel - Folding - 450 lbs # M2205 has a distance from the center of the hitch pin hole to the closest edge of the carrier of 14 inches when in use and 12 inches when folded up. It will absolutely fit on your 2011 Honda CR-V with your Hidden Hitch....
    view full answer...
  • What Hitch Is Available For 2011 Honda CR-V That Will Accept Thule Camber 4 Bike Rack
    I recommend the Draw-Tite Class III 2 Inch Hitch # 75547 for your 2011 Honda CR-V. This hitch has a tongue weight capacity of 675 lbs and it will accept the Thule Camber 4 Bike Rack # TH9056. I am including a link to the installation instructions on the Draw-Tite for your vehicle. It is a very simple bolt-on installation procedure. Any auto repair facility will be able to install the hitch. If you have a favorite mechanic that works on your vehicles he will be able to install the hitch...
    view full answer...
  • Why are There Two Different Size Holes on the Draw-Tite Class III Hitch for 2009 Honda CR-V
    The Draw-Tite Class III Trailer Hitch, # 75547, that you have on your 2009 Honda CR-V will use the 5/8 inch hole to secure hitch mounted accessories or ball mounts to the trailer hitch. The smaller hole is not used at all. If you have a hitch mounted accessory with a 1/2 inch hole, then it is probably intended to be used with a 1-1/4 inch trailer hitch receiver, rather than a 2 inch receiver. If this is the case, then you could use a Hitch Reducer, # HT02, to use that accessory with...
    view full answer...
  • Sway Control Recommendation for Pop-Up Camper Pulled By 2011 Honda CR-V
    My usual recommendation would be a weight distribution system with a sway control component built in to it, but we'll need to go another route because Honda doesn't recommend using weight distribution with the CR-V, but I do have a solution for you. I'd use the # D320 ball mount with sway control tab along with a Friction Sway Control like part # 83660. This would be just the ticket for a pop-up like yours. One caveat, you don't want to back the trailer with the friction sway control...
    view full answer...
  • Install Details for Draw-Tite Trailer Hitch Receiver # 75547 for 2007 Honda CR-V
    The trailer hitch receiver that fits your 2007 Honda CR-V is # 75547. I've attached the installation details to this page for you.
    view full answer...
  • What Size Bolts are Used to Install Draw-Tite # 75547 on a Honda CR-V
    The Draw-Tite trailer hitch receiver, part # 75547, uses 4 hex bolts that are M10 X 1.25 X 30. However, you shouldn't tap the threads uness you absolutely have to as a last resort. I highly recommend cleaning them before tapping them. I've linked an article and a video that shows this process for you. I've included a link to a video of the installation for you as well.
    view full answer...
  • Recommended Trailer Hitch Receiver For 2011 Honda CR-V
    To best accommodate your Yakima Swing out Bike Rack on your 2011 Honda CR-V, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75547. This hitch is a confirmed fit for your vehicle and is an easy bolt on installation. It has round tube design with a black powder coat finish over an e-coat base for superior rust protection.
    view full answer...
  • Trailer Hitch Recommendation for 2010 Honda CR-V
    For your 2010 Honda CR-V both light-duty 1-1/4-inch hitches and medium-duty 2-inch hitches are available and shown on the linked page. The 2-inch hitch is a better option because it has a higher capacity and because there will be more choices for accessories in this larger size. I suggest the Draw-Tite # 75547 which installs without drilling using the included hardware kit. Written instructions, helpful articles and a video are included for you.
    view full answer...
  • Trailer Hitch Receiver to Fit a 2010 Honda CR-V
    You're correct the Draw-Tite hitch, part # 75742, does not fit your 2010 Honda CR-V. It fits the CR-V from 2012 to 2016. For the Draw-Tite that does fit your 2010 you need part # 75547. The Curt you mentioned, part # 13555, is also a fit for your Honda.
    view full answer...
  • Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V
    There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame # 24792, feature a square tube design, while the Class III hitches like the Draw-Tite # 75547 have a round crosstube. This crosstube shape may appear to indicate the hitch's strength, as they differ between the two classes, but the design is typically only relevant to the physical appearance of the hitch. A round...
    view full answer...

< Previous
123. . .4

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.